Ok from my iPad I put some a lot iTunes card to buy some coin from diferent game an never you're send me a or email me to let me know how much taxes you're charge an how much money I have lelf on my account of the iTunes card
Listen I not gonna keep reply my issue to guys you're making hatter n hatter for customer
This is not Apple. This is a user to user forum.
If you are not getting your receipts, check the primary email address for your Account when you log into appleid.apple.com
You can see your iTunes balance in the iTunes Store section of iTunes on your computer, or form the bottom of the Featured Screen of the App Store App or bottom of the Music Screen of the iTunes Store App on your iPad.
You can find your purchase history and receipts by viewing your account in iTunes. Follow these instructions.
Contact iTunes Store.
Contact Apple.
Similar Messages
-
How do i find out how much money i have on my apple account?
How do i find out how much money i have on my apple account?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
-
i was trying to dowen load the song from my I POD to my I tune
i lost all my songs and pictures i had on my I POD while doing so
could you please let me know how can i get my pictures and songs back to the I POD?
many thanks for your help- If you backed up the iPod after taking the photos then restoring from backup will recover the photos. To restore from backup see the restoring topic of:
iOS: How to back up
If you restore via iTunes make sure that autosyncing is turned off. Go to iTunes>Preferences>Devices and check the box that says prevent iPods...".
- Otherwise if the photos ore not on the computer or iPod they are gone uless you can get them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
Kindly let me know how to customize ESS Screens
Hi,
I configured NWDI, created Track. I got all DC's in nwds.
I created a proj and opend it through WebDynpro. Each proj having min of 3-5 Components.
I hav seen all the component views. When i execute an application the output what i m gatting is different from what i hav seen views of different components
I didnt find frm wer this view is coming.
for eg, here i opened proj EPD_ESSDev_Dessinaddrsap.com
this proj is having below components
CcPerAddressIN
FcPerAddressIN
VcPerAddressINDetail
VcPerAddressINOverview
VcPerAddressINReview
Kindly let me know how to customize this?
Regards,
VenkatHi Snehal
Here is the references,
WebDynpro Component :FPMComponent - com.sap.pcuigp.xssfpm.wd
Interface View :FPMComponentWindowInterfacView
Startup Plug :Default
But in my proj there is no component with the name FPMComponent - com.sap.pcuigp.xssfpm.wd
, then from where this is taking...
kindly guide me
ThankQ -
Please let me know how to avoid receiving the spam (from the spam folder on the server) into my email accounts on the iPad. It is very annoying!
My server puts it in a spam folder and I do not receive it in the Ms Outlook on my desk computer...why do I get it on the iPad? Is it avoidable and how?bYou actually cannot do anything to your ipad when its locked but look at pictures the time and date, you need to restore it, and if it dosent let you restore, good luck chuck Heres how to restore it: Okay, i only know the itunes way soz, lol. Try to connect your ipad to itunes, if it does let you then you should be able to select the device you have in the corner somewhere, once you do that you should see a screen that looks sort of like your ipads setting, you should have a button that says "Restore" click that and your ipad should be restored. If that dosent work you should try going to your regular office depot or something. Good Luck!
-
i went to put music on my itunes from my ipod and it deleted most of my music off of it and i dont know how to get it back. PLEASE HELP ME. :-|
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If necessary, you can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How do I find how much money I have left on my iPad
How do I find out how much money I have left on my iPad
The iPad is not a bank it does not have money.
If you are referring to your iTunes account you can view your Balance in the iTunes App at the bottom of the featured tab. Next to your Apple ID. -
Hello,
I'm having probelms backing up my information to my iCloud account. I tried to reset the account and erase everything in my account but the problem is still there. The problem is that my iPhone is not able to complete the backup process and all it is saying a problem occured.
Someone Pleas let me know how to reset my account, delet everyhting in the Cloud and start a new backup.
Thanks very much,
Dalal TammarWelcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a completely erase and clean up of the iMac?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
I need to do a restore - I accidentally unplugged during a download - I am scared I will lose my pictures from my recent family trip!!! Please let me know how to avoid losing these pics.
Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further
When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from. -
I just updated iOS on my iPhone 5.
What a shock!! Where is the premium look and feel I bought my iPhone for?
If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.
-
Can anyone let me know how can i get the ouput from BW in .txt format.
Can anyone let me know how can i get the ouput from BW in .txt format. See we can get output as Excel(i.e BEX) and manually convert it into txt format. I need a direct or automated way to do the same.no human intervention.
mail me at [email protected] or post answer in sdn.Please do not multiple post across forums..
how can i save the data in BEX reports in .txt format automatically
This helps in keeping track of answers and avoids the issue of repeated answers across forums...
Please close one of the threads as answered and provide the link that you want to follow
Arun -
HT5035 My iTunes account is not showing how much money I have left on my gift card can anyone help
My iPad does not show how much money I have left on my gift card it used to but not now and I would like to keep track on how much I have, as I don't want the money I use taking out of my bank account, help thanks
Open iTunes store, click Featured and scroll to the bottom.
-
How can i check how much money i have on my iTunes gift card?
How can i check how much money i have on my iTunes gift card?
If the card has been redeemed then its remaining amount should be on your account, the card itself is now effectively zero. My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). If your account's balance is zero then it might not show at all.
Maybe you are looking for
-
Linking to Adobe Bridge Metadata info
I have images that I have added to a folder in Adobe Bridge. I have added metadata (copyright, source etc...) to each image. I need to track every image I use in an Access database so I can view the thumbnail for the image in an .asp page. When I cli
-
i am using dynamic field catalog in one if the report. in the selection screen i have MONTH/YEAR AS SELECT OPTION.IF I ENTER 200801 FROM THERE TO TILL SYDATUM DATA WILL DISPLAY SO I CANNT DECIDE how many month/year columns will come depends on select
-
GW 2012 POA crash when changing data
Hey, I recently migrated my Groupwise installation to a Windows 2008 R2 server and upgraded from version 8 to 2012. As of much, the installation runs smoothly, but whenever I launch ConsoleOne on the server, and updates groupwise information, POA wil
-
Calendar entries updated when changing time zone (...
Can somebody please explain to me the use of this option? It is logical you make your appointments on the local time no? Because of this stupid option, I almost missed an important job interview. Is there any way to turn it off? Or can the next updat
-
Is installing Java for OS X 2014-001 safe?
Is there any reason to install Java for OS X 2014-001 posted 05-29-2014? Is there any reason not to install Java for OS X 2014-001 posted 05-29-2014? Will this download remove/replace or overwrite my Java 7 install? (Java for OS X 2014-001 includes