Ok frustrated by 7.02, I tried to install an older version but...

It will not import my library because "it was created by " a newer version of iTunes"
Got any solution to this one?
I dumped the x file.

For a clear explanation read this thread:
http://discussions.apple.com/thread.jspa?messageID=3121739
I won't try to explain what to do because I'll probably mess you up but it's all in that thread. I followed the instructions and it worked fine.
G4 1.25 MHz   Mac OS X (10.3.9)  

Similar Messages

  • I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

    I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I deleted my version of Adobe Flash Player for the latest version and then it wouldn't install. Now I have no version and need advice as to trying to install an older version or what?

    Since the latest version of Adobe Flash Player wouldn't install after deleting the version I had that did work, should I try to install an older version?
    I just checked in the control panel and my add/remove programs and listed is Adobe Flash Player Active X, version 11.1.102.55. But when I tried to view a video I could not and got a message saying I needed Adobe Flash Player. Now I'm really confused?????
    ''Locking. Duplicate of: https://support.mozilla.com/en-US/questions/897585 ''

    Hi,
    What does "still won't work" mean?  Flash Player 10.3.183.90 is very old.  You might find that many sites require a newer version of Flash Player to view content, perhaps this is what you mean by "still won't work".   Depending on your system, you may be able to upgrade to OS X 10.6 which will enable you to install the newest version of Flash Player.  There's lots of information on this on the internet.  Just search for "upgrade OS X 10.5.8 to 10.6" or similar.
    Maria

  • I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

    Why do they even offer a free trial version of livecycle es4,  when its obviously not free??????
    i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
    a messsage pops up saying Error 13:11 Source file not found verify file exsist.  what does that even mean?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I don't like some features in the new iTunes and my favorite visualizer doesn't work with it . I threw everything to do with iTunes away and tried to install an earlier version but the installer kept giving us this error page telling us to quit iTunes !

    The installer is crazy . It keeps thinking that iTunes is running even though we dumped everything we could find ( preferences , application , libraries ) . Did I miss something ? Is there an uninstaller? I need an earlier than 10.5 version . I don't like the side swipe ( it feels unbalanced ) effect and my favorite visualizer doesn't work right with it . Thanks!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

    I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

    Apple is more likely to see your comments if you send feedback via:
    http://www.apple.com/feedback/itunesapp.html
    =Downgrading from iTunes 11 to iTunes 10.7=
    You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404).  Alternatively:
    Back up your computer first, in case the unexpected happens.
    Quit iTunes.
    Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at:  http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
    Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394.  Do steps 3 and 4.  Steps 6-8 may be also useful but I don't know if they are essential.  Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
    Replace the iTunes 11 application with iTunes 10.7.  Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved.  Two ways to do this are:
    1.  Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
    2. Check this reference on how to delete the iTunes application itself:
        Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
        After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7.  I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
    AirTrafficHost.framework
    CoreFP.framework
    DeviceLink.framework
    iTunesAccess.framework
    MobileDevice.framework
    After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl"  and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since.  See:
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Other issues:
    - https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
    - If you encounter error -42408:
    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
    Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested).  A  variant of this is at: https://discussions.apple.com/message/20448184
    - Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

  • I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

    i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me  a message says "the file location is not a valid installation packaage for the product iTuness.  Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes".  Any help, insight, guidance would be greatly appreciated!!

    "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

    I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

    Hi 49balf,
    Thanks for visiting Apple Support Communities.
    I recommend removing and reinstalling iTunes using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best,
    Jeremy

  • I am trying to install a newer version of iTunes. It goes to the end of the install and cannot remove the older version. Now it does not work at all. Help!

    Trying to uninstall an older version of iTune on a PC running XP pro.  It goes to end of install and has a conflict. Uninstalls the new version, but will not reload the older version.  No iTunes will boot up.

    It goes to end of install and has a conflict.
    What's the precise text of the error message you get at that stage, please?

  • HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."

    I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."  When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114".  I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package anyone got any ideas how to fix this?

    i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
    i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?

    There are numerous threads discussing errors with 10.5.0
    can't install itunes 10.5
    ***Fix for iTunes 10.5 Install on Win7 64bit***

  • I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

  • I have just tried to instal the latest version of itunes, it failed and i have amessage that says ' an application has made an attempt to load the C routine library incorrectly@ also error 7  windows 1114.  I have totally uninstalled itunes and cannot eve

    I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly'      I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS1717 i tried to install a new version of iTunes on my PC (Vista) and it wouldn't install.  Today, I was looking for my iTunes, and somehow it was erased form my computer, along with about $130.00 worth of songs.  Wha Happened?  How can I get it all back

    has anyone ever had their apple ipod disappear from the computer?  Mine did when I tried to install a newer version on my pC (vista), yesterday.  Now I can't even see any apple icons on the screen or any other reference to my ipod tunes.  I have had them on the computer for more than 6-years, and have spent a sizeable sum with apple buying iTunes.  Help!

    One more note.  All my music on my iPhone was erased when I clicked on "Transfer Music from iPhone".  I mistook the "from" for "to".  I want the music to go from the PC to the iPhone, not the other way around.  I've sync'ed many times since the latest version of iTunes, so I know that doesn't work.

Maybe you are looking for

  • Adobe Acrobat Pro X

    I need help finding out how to download Adobe Acrobat Pro X? I bought it on CD with my CS6 but I cannot find those disks.  I bought a new computer and want to put it on there, but I cannot find it anywhere on line to download.  I can find the Pro XI

  • Partial Records insertion using DB Adapter - SOA 11g

    Hi, We have a BPEL process in which we are inserting records in a table using DB Adapter. Currently if the input data has any problem of data type miss-match then all the records are rejected. None of the records are inserted in the table. Whole batc

  • How to get last insert/update/delet row of a table?

    I hava a table A and table B which is a copy of A. I want to create a trigger to record the changes of A in B. So every time inserting/updating/deleting A I record the row inserted/updated/deleted in B, But I can't find a effiencial way to get the la

  • Home sharing error 5599

    Hi, can anyone help on this, i have just had to reset my brothers Apple tv 2nd Gen (model no A1427), because of a problem with movie genres disappearing...and i now get the error message of 5599 when trying to setup home sharing on win xp machine...I

  • Excise value condition type jm01

    Hi, for basic excise condition type JM01 which is maintain 14% excise rate in J1ID IN FTXP base is 100 but it is calculating 202 % where to check it