Ok got some kind of horrible *** problem (charging)

rite heres the thing, may have left my ipod on all nite and drained the battery.
i've reset the ipod keeps turning back on. i've connected it to the computer to charge, the comp doesnt recognise it, and doesnt charge. wont turn off. and the screen seems 2 always have the apple logo on it. (silver + Black)
its a video ipod. and just keeps coming up with colourless battery signs. i have no idea wat to do. can some1 pls help me. i've only had it since march and dont rele want 2 replace it
PC Windows XP

See these.
The Five Rs.
iPod shows only an Apple logo and doesn't start up.
Only the Apple logo appears when turned on.
My iPod won't wake up.
iPod battery doesn't charge.
Your Windows PC doesn't recognize iPod.
When restoring the iPod, put it into disk mode first.
Putting iPod into disk mode.
"its a video ipod."
And you're posting in the iPod nano forum?? : )

Similar Messages

Some kind of technical problems (like slow data processing)...

Some kind of technical problems (like slow data processing) with Leopard appears during the working in the local network.
OS Snow Leopard 10.6 is installed; including all updates, the computer I currently use is Mac Pro. So I have some kind of technical problems (like slow data processing) with Leopard during the working in the local network. (Windows network).
During the attempt to connect with network sharing (the computer is in the network) automounter process took approximately one minute.
Later on, after the automounter process is finished it’s working quite normally over remote computer, but when you try to automount again, everything starts from the very beginning.
The internet is working very well, it’s connected with domain, and everything is adjusted.
I use to ask our system administrator; maybe it is necessary to activate the some kind of protocol?
The OS Tiger is installed on the second hard disk, and it’s working well.
Maybe someone could help me, I try to find the similar problems, but I could not find them.
Thanks//

A couple of things.
First, thanks for the tips. I was starting to suspect the network might be an issue (bad nic, bad router, something).
But netstat -s was showing an average of about .15% packet loss. For a web server that seems to be a pretty good value so I'm not sure.
I did, however, ask someone else to look at the server because I'd spent the whole week on just server performance and was going out of my mind. This second pair of eyes really helped as he found that the pagefile for the server was set at 2mb!? Still trying to figure out how that happened. But we increased the pagefile to a much better value. There wasn't an immediate change in performance, but over time the server appears to have begun to respond better.
Occasionally I still get these 'lag spikes' but nowhere near what they were and the delay is much smaller as well, which is probably being caused by something else entirely (like bad programming on my part, hah).

Google maps have some kind of Java problem, won't load?

There is some kind of problem with Google maps suddenly not loading. I tried Google's fixes, but it's still bad. They say Skype figures into it, but I don't have Skype. This problem started on mine suddenly yesterday. I start to type a location in the box, and a little yellow "loading" box appears at the top, and then NOTHING HAPPENS.
Anybody know about this?
Thanks...

Thank you for that input. In my little room here, it's hard to tell which wire or cable is what, even tho I installed this stuff a couple years ago. I have Comcast Broadband, which has been real reliable.
This problem started just yesterday, and I don't THINK it's what you're idea is. I'll wait a while to see what else might happen on this.
Thank you.

Some kind of raid problem

sh /usr/src/linux-2.6.24.3/arch/x86/boot/install.sh 2.6.24.3 arch/x86/boot/bzImage System.map "/boot"
Fatal: raid_setup: stat("/dev/hda")
make[1]: *** [install] Error 1
make: *** [install] Error 2
I tried today to compile new kernel but got this error after i ran make install.
Of course before that i ran "make menuconfig" then i save it and run "make"," make modules", "make modules_install".
Funny thing is that I dont use any kind of raid. From reading similar question i have seen that others
got the same problem but they run LILO but i use grub.
btw I downloaded kernel 2.6.24.3 from www.kernel.org.
Anyone has an solution for this problem?
Any kind of help would be appreciated.

I believe the RAID is created internally to the box itself, not by OS X. If you remove the drive then you will break the RAID. For more information you should contact LaCie tech support as the Apple Discussions do not provide support for third-party products.

Some kind of a problem

Hey guys, I was wondering what is wrong with my Macbook Pro. It is a late model fo 2008.
Ok, here comes the problem:
1st: No sound or any audio coming out from mybook
2nd: My keyboard light is not lighting up (F5 & F6) buttons
3rd: Everytime I restart my macbook it just dosen't automatically restarts, I have to press the option button to choose where to boot from
4th: And I keep having this error showing up after Switching on or Restarting.
Running 10.8.4.
Please help.

This is for the audio problem. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article.
2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
3. Boot in safe mode. You don't have to log in; just reboot as usual when the login screen appears.
4. Reset the NVRAM.
5. Reset the SMC.
6. Reinstall OS X after backing up all data.
7. Make a "Genius" appointment at an Apple Store.
Resetting the SMC may also restore the keyboard backlighting.
Make sure that the right volume is selected in the Startup Disk preference pane.

T500 - some kind of internet problem.

I've had a t500 for the past 2 years and I haven't had a single problem with it (minus the keyboard flex, but that's a different story) until this morning. My wireless connection was working fine until randomly, I stopped being able to load new pages. My computer was still connected to my house's wifi (or so it said), but the internet just wouldn't work. I took it downstairs and plugged it into the router with an ethernet cord, but it still wasnt working. Then, directly into the modem, but still nothing. Keep in mind that through all of this, my computer still claimed it was connected to the network and all that. Every so often, it would change to "connected - no internet access" or "connected - no network access" or something similar. I dont think it's a problem with the router or modem, because all the other machines in my house can connect to the net just fine. On top of everything, I can get the internet to work for about 45 seconds if I restart my machine. Once restarted, my homepage will load, followed by the next page i try to get to, but then after about a minute, it stops again. I'm really at a loss for what to do here, and any help would be greatly appreciated. Thanks!

hey iseepee,
could you uninstall both the ThinkVantage Access as well as the wireless and wired network drivers from your unit.
let windows install its generic drivers. now try connecting to your connection via a wired and via wireless .
at the same time, i would like to know; the T500 can it connect to a wireless/wired connection outside your home ? maybe at a cafe that provides wireless internet ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Some kind of Fatal Problem!

Hi all
I have strange problem.
Today suddenly on my phone has a message that says "Connect your phone to iTunes and restore"
When i try to restore it was impossible. Every time i try i have samo error message say:
"The iPhone could not be restored.An unkown error occurred(23)"
Is this hardware problem and how to fix it,if you know?
Thank you in advance.

According to http://support.apple.com/kb/HT1937, Globul provides support for the iPhone in Bulgaria.

I updated to ios6 with my iPhone 4 and after the update I connected to my Sweex wireless(the first connection after the update) and since then it has some kind of a problem.

The phone cannot connect to App Store , Weather , iTunes(phone) nor some other things for e.g I cannot post photos to Instagram but still can use the app just to look at others pictures except uploading mine..

restart phone
reset phone and reset router
setting>general>reset>reset network setting

There is some kind of billing problem and it wont work using an other card what is wrong? What should i do to fix this? :) all answer will be apreciated! :)

Billing problem and it wont work using another card... Help

Billing problem and it wont work using another card... Help

Some kind of timecode problem... i think

Hi everyone.
I'm trying to capture about 22 minutes of video to my MacBook Pro. The camera taped with was a JVC HD110. I'm a student, and apparently, another student who checked the camera out tampered with the timecode generator ( i think you can slave the timecode on this camera... not sure).
At any rate, the time code that appears on my JVC GR-HD1 begins at 191:14;07
FCE HD translates that TC to 19:51:14;07. Somewhere down the line, as i attempt to capture, I get an error in FCE HD saying it's reached the end of the tape. But it plays fine on my camcorder. I haven't been able to capture any of the video to my notebook yet.
Anyway, is there any-way around this timecode issue? AND do you think the TC issue is causing this problem in the first place?
Thanks!
-Nathan

Nathan,
in the assumption that you have the latest FCE update (as suggested by Al) and that the unusual tape TC might be an issue, I suggest you to try a different easy setup: DV-PAL DV Converter (or DV-NTSC DV Converter) to bypass all timecode controls by FCE.
This setup works when the source device (usually but not necessarily a A/D converter) does not provide timecode nor controls (play, stop, rewind etc), but requires that you manually control the camera. In addition the captured media will not have the source timecode, thus preventing you from "capturing project" in the future, if needed.
But at least you might be able to capture... worth a try.
Piero

I've got some kind of issue with removing an ActionListener

public class JTextNameListener implements ActionListener
    public void actionPerformed(ActionEvent e)
      //if (buttonEnabled == true)
        passengers[currentButton-1] = jTextName.getText();
        jTextName.setEditable(false);
        jTextSeatNumber.setText(Integer.toString(currentButton));
        if (currentButton == 2)
          btnSeatTwo.removeActionListener(ButtonChoiceListener);
          btnSeatTwo.removeActionListener(ButtonEnableListener);
          btnSeatTwo.setForeground(Color.black);
        else if (currentButton == 5)
          btnSeatFive.removeActionListener(ButtonChoiceListener);
          btnSeatFive.removeActionListener(ButtonEnableListener);
          btnSeatFive.setForeground(Color.black);
        }Here is the segment of code that is not functioning properly...and i'm a bit confused.
The entire program is working except when I hit enter for this JTextField...it does not remove the listeners off of the Buttons. I declared these up top as private fields and then I added the listeners by doing this...
add(btnSeatFive);
    btnSeatFive.setForeground(Color.GREEN);
    btnSeatFive.addActionListener(new ButtonEnableListener());
    btnSeatFive.addActionListener(new ButtonChoiceListener());
    add(btnSeatSeven);
    add(btnSeatNine);
    add(btnSeatEleven);
    btnSeatEleven.setForeground(Color.GREEN);
    btnSeatEleven.addActionListener(new ButtonEnableListener());
    btnSeatEleven.addActionListener(new ButtonChoiceListener());
    add(btnSeatTwo);
    btnSeatTwo.setForeground(Color.GREEN);
    btnSeatTwo.addActionListener(new ButtonEnableListener());
    btnSeatTwo.addActionListener(new ButtonChoiceListener());
    add(btnSeatFour);
    add(btnSeatSix);
    btnSeatSix.setForeground(Color.GREEN);
    btnSeatSix.addActionListener(new ButtonEnableListener());
    btnSeatSix.addActionListener(new ButtonChoiceListener());
    add(btnSeatEight);
    add(btnSeatTen);
    add(btnSeatTwelve);

alright thank you very much! I ended up having to do this for some reason...but works perfectly...
private ButtonEnableListener enableListener = new ButtonEnableListener();
private ButtonChoiceListener choiceListener = new ButtonChoiceListener();
if (currentButton == 2)
          btnSeatTwo.removeActionListener(choiceListener);
          btnSeatTwo.removeActionListener((ActionListener) enableListener);
          btnSeatTwo.setForeground(Color.black);
        else if (currentButton == 5)
          btnSeatFive.removeActionListener(choiceListener);
          btnSeatFive.removeActionListener((ActionListener) enableListener);
          btnSeatFive.setForeground(Color.black);
        }I don't understand why I had to cast the enable listener but eclipse told me to do it and it worked so...Still if anyone knows why I had to do that, that would be helpful.

I got some kind of error message and I don't know what to do with it.

html xmlns='http://www.w3.org/1999/xhtml' xml:lang='en' lang='en' xmlns:fb='http://www.facebook.com/2008/fbml' >
<HEAD>
<TITLE>Congratulations!</TITLE>
<STYLE TYPE="text/css">
.friendly
display: none;
.original
display: block;
</STYLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER>
<BR>
<TABLE BGCOLOR=#FFCC00 BORDER=0 CELLPADDING=1 CELLSPACING=0>
<TR>
<TD>
<TABLE BORDER=0 CELLPADDING=4 CELLSPACING=0 WIDTH=100%>
<TR BGCOLOR=#CC0000>
<TD ALIGN=center>
<FONT COLOR=FFFFFF FACE=verdana,sans-serif SIZE=+3><B>You're almost done!</B></FONT>
</TD>
</TR>
<TR BGCOLOR=#FFFFFF>
<TD ALIGN=center>
<BR>
<FONT FACE=verdana,sans-serif SIZE=-1><B>
Please take a few moments to respond to our Special Survey below. You Must Keep Going To Qualify For Your Gift!<P><B>Tip</B>: Check "Yes" to get great FREE STUFF & Special Deals - As Many as You Wish!<P></FONT>
<BR><BR>
</TD>
</TR>
</TABLE>
</TD>
</TR>
</TABLE>
<BR>
<BR>
<BR>
<TABLE BORDER=0 WIDTH=580>
<TR>
<TD ALIGN=center>
<FONT FACE=verdana,sans-serif SIZE=-2>
You must be 13 years or older.
<P>
<A HREF="info.htm?tp=privacy&SID=e7dj34i4uuq5p5rkjpefnu6g26" TARGET=_blank onClick="make_x_win=0;">Privacy Policy</A> | <A HREF="info.htm?tp=tos&SID=e7dj34i4uuq5p5rkjpefnu6g26#gift" TARGET=_blank onClick="make_x_win=0;">Terms & Conditions</A>
<BR>
Copyright © 2005 Clipngocoupons. All rights reserved.
</FONT>
</TD>
</TR>
</TABLE>
</CENTER>

<SCRIPT>
if(document.getElementById('processing')) { document.getElementById('processing').style.display = 'none'; }
if(document.getElementById('submit')) { document.getElementById('submit').style.display = 'none'; }
</SCRIPT><IMG BORDER=0 HEIGHT=1 WIDTH=1 SRC="http://www.theuseful.com/setcookie.htm?user_pin_id=207945910&pin_key=216256&email=[email protected]&email_key=e24a56a59cd7525fcf0c4b9ad62d71dc"> </BODY>
</HTML>

I'm guessing you did not buy the iPad from Apple. If you did not buy it from Apple, it may very well have an older software version. Only iOS 5 or later is PC independent. If you have an earlier version, a computer with iTunes loaded is required.
 Merry Christmas

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

Iphone 5 is taking too long to download through EDGE why????????Please help i just wnat to confirm that it is the normal behaviour or it is some kind of problem please help

iphone 5 16 gn black my iphone is taking too long to download apps from apps to download on my iphone so please help from overcoming this problem
i just want to know this is the normal behaviour or it is some kind of problem

You have to turn on 3G/4G/LTE and be in a coverage area for such to happen.
Or connect to wifi.
Normal behavior for Edge is very very slow.

HT3887 Hi I have just got some new wWas iireless head phones and when I use them with the Bluetooth on my iPhone 4S it breaks up all the time even from short distance but when using my girlfriends iPhone 5 or iPad it's fine no problems atall!!! Any ideas

Hi I have just got some wireless head phones and while using Bluetooth with my iPhone 4S the sound breaks up all the time but if I use a friends iPhone 5 or my iPad it's fine no problems atall! Any ideas what the problem could be people??????

Unpair the headset from the phone with the problem. Restart the phone (hold HOME and SLEEP until an Apple logo appears), the pair the headset again. Also, look for things nearby that may be causing interference in the Bluetooth band. Cordless phones are a common cause of interference.

Ok got some kind of horrible *** problem (charging)

Similar Messages

Maybe you are looking for