Ok i got ichat video to work but i still dont have audio

Ok i got ichat video to work through my linksystem router by turning on upnp. but i cant get the audio to work. any suggestions.

Hi John,
Check System Preferences > Sound > Input has the correct device selected and the response bar above half way.
In iChat check the Video Menu > Microphone Enabled item is ticked.
Check in iChat > Preferences > Video section that the correct Mic is also selected here.
Do the same for Out put devices if more than one option
8:52 PM Saturday; December 9, 2006

Similar Messages

  • I did the software update on my mac, but i still dont have the "App Store" in the dock :(

    i really need the app store

    i just did that a minute ago.. got sidetracked and played chess, but its not there. My friend said something about lepoard... also does it help if i said im running on 10.5.8?
    The Mac App Store requires a minimum of 10.6.6 to run, if you are running Leopard you need to purchase Snow Leopard and upgrade. The upgrade is $29 and available from any authorized Apple Reseller or directly from Apple. No you cannot download it, you must purchase the dvd.
    Roger

  • HT1725 i downloaded an album a while ago and it still has yet to download i mean i preordered it but i still dont have it i have tried everything

    Im upset that nothing is working and no one is helping

    I have this same problem.  The album shows available to download from the cloud, but the 3 remaining songs won't download.  The songs happen to be the first 3 songs on the album.  The purchase & initial download was initiated via 3G; the rest of the songs were downloaded via WiFi.  I have over 20GB of storage available on my iPhone, so it's not a capacity issue. 

  • I just renewed my account services but I still dont have access to convert to word, why?

    I cannot convert at pdf file to word document and when I look at my account, it does not appear as if I have just subscribe for the yearly charge on my account.

    Hi marielaf40210050,
    I have forwarded your issue to the concerned person, however if you urgently need to convert files, you can download Free 30 Days trial of Acrobat software.
    Regards,
    Rahul Tyagi

  • I deleted my  media db3 file but I still dont have fx and filters what should I do?

    Barbara told me since I could not get my fx and filters to appear when I click them in the full edit mode I should delete my media db3 file and let it repopulate itself after it launches.  It didn't, what should do next?  I also deleted that file from my trash and it is not in my finder file any more.
    fred

    Barbara,
    That was the problem.  Once I changed the read write status of the user acct and then deleted the media db3 file in that user acct and relaunched the program it repopulated the effects and filters pallate.
    Thanks so much for ending this frustration. 
    Like I said I purchased your book on the missing manual for PSE for Mac and I am slowly absorbing its content.  Do you know of any helps that I could use to see some of your teachings in a live presentation somewhere on the web?
    Fred

  • Ichat video not working..  Need network genius

    Hello all, I've spent numerous hours trying to get my ichat video to work. but nothing does.
    I just bought a new imac a couple weeks ago and everything is updated-
    I have DSL my ISP is internet america - and i'm using a zoom x6 modem.
    I have a 1483 bridged IP + NAT connection
    I've set up a static internal IP - and forwarded all the ports I need to - Upnp is enabled.
    I've tested it with the 3 ichat test bot things, and they all work, but when i try real people it doesn't work. i get some kind of an error-8
    I'm stuck, and all the tech support places i call for my router or for apple don't have any idea what to do. I need a genius! like in the commercial!
    thanks,
    wyatt
    p.s. - please for the love of all that is holy don't tell me to restart my modem and computer again.

    Hi
    Welcome to the  Discussions
    I've set up a static internal IP - and forwarded all the ports I need to - Upnp is enabled.
    Use UPnP or Port Forwarding not both.
    6:01 PM Sunday; December 9, 2007

  • We need to get some help and explanations about iChat video not working.

    I've read so many postings about iChat Video hoping for an answer to my problem, but not only did I not find an answer, no one else has been receiving an answer either.
    I've had multiple problems with my ichat video not working.
    I either get an error saying someone didn't accept which isn't the case, or I get some error-8 or something ridiculous like that.
    Can we get some help from apple support or something?!

    Short answer: No, we can´t...!
    Apple don´t care about us users, unless you pay for an Apple Care Service. Try your best to follow some advices from around this forum. That´s the only help you will get.
    Some people have got their iChat video working again after following some advice. By the way. I´m not one of them... I´ve tried every single tip I read here, but I´m still stuck with text chat only...
    Good luck.

  • IChat Video Not Working since PSP3 bought!!

    Hi guys,
    ichat video not working since I bought and installed a new Playstation 3. I have a BT HUB that connects wirelessly with the imac. I have BT Vision running from the HUB too via ethernet wall boost adapters. I had this problem with video when i installed the BT Vision. And turned out to be something to do with Application Sharing settings on the HUB. I resolved it by correctly sharing AIM TALK with my wireless imac. Now the same problem has arisen since the psp3 was put on. But even with all the things I've tried I am stuck as how to get the video up and running as before. The devices running off the hub include:
    1. imac (wireless via Airport Extreme)
    2. BT Vision via ethernet and wall adaptors
    3. iPod touch via wireless
    4. PSP3 via wireless plug and play
    I have checked all the ip address for these devices and have enabled app sharing for the imac wireless to AIM TALK in BT HUB manager. I have also opened my firewalls; changed the port setting to 443 in ichat preferences; re-set the HUB/Router;
    Is there anything else I can do or check? As I said it worked perfectly before the psp3 went onto the
    network. Should i assign AIM TALK to the imac wireless or to some of the other devices? (though I think I've tried that too!!)
    Help would be much appreciated as this is driving me to insanity, if I wasn't there already!!!!
    Take care, and thanks in advance for your help.
    Baz, Belfast, Northern Ireland, Europe!!

    "speedtouch modem!"
    Yes you do.
    Thomson-Alcetel who make the Speedtouch range make this device for BT.
    The Firmware is Thomson-Alcatels with BT Logo-ing.
    This Ethernet 3 connection is probably internal.
    Have you got System Preferences > Quicktime > Streaming set to 1.5Mbps ?
    If not then do and restart iChat to see the new speed.
    In Leopard the Automatic setting is read by iChat as 384K.
    This may be allowing the PS3 to have too much of the bandwidth.
    I or rather my son has a X-Box 360 which can be on-line when I video chat and it works for me, as it does when he uses his PlayStation 3
    If the AIM talk setting uses the same port here as it is listed elsewhere then it has only opened/allowed port 5190.
    This would have appeared to have been coincidental to any iChat use when you changed it.
    Are you not using UPnP in this device ?
    Which firmware is it up to ?
    Anything above 6.2.2.6 should work.
    Anything starting with 6 and containing letters is later.
    In the .telephony section does it mention which port are open ?
    9:00 PM Sunday; May 11, 2008

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

  • HT203180 i converted my videos to mp4 but itunes still refuses to let it work and shows the same window shown above. I transfered all photos and music but i can not transefer my home videos. what should i do?

    i converted my videos to mp4 but itunes still refuses to let it work and shows a winow that says "....... (item) an not be copied to itunes because it can not work on your ipad" although mp4 files are supposed to work on my ipad. i tranfered all music and pictures to itunes but i can't transefer my videos. What should i do?

    Since I am impatient and can't wait for 90 minutes for an answer, I have decided to lose everything on my iPod and try to remember all the songs I had on them. But if anyone can help me prevent this in the future, that woud be great!

  • Finally got face time to work - but screen freezes and can't continue the call

    finally got face time to work - but screen freezes and can't continue the call - how can I fix this problem?

    Probably a network problem but see here for troubleshooting: http://support.apple.com/kb/TS3367

  • I forgot my iPod at a bomb fire at school and it was on the field and water got on it everything works but you can tell that theirs water inside how much would it cost to replace the screen at apple

    I forgot my iPod at a bomb fire at school and it was on the field and water got on it everything works but you can tell that theirs water inside how much would it cost to replace the screen at apple

    Place the iPod in a sealed container with a desiccant for a week. Uncooked rice works. Change the desiccant every day or so for a week.
    Do not charge or turn on the iPod until dry. Then try:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for
    $199 for a 64 GB 4g
    $99 for the other 4G iPod
    $149 for 5G iPod.
    They do not fix yours.
      Apple - iPod Repair price

  • HT201436 FaceTime problems.  The video part works but person I am talking to cannot hear me.??

    Trouble with FaceTime.  The video part works but the person I am talking to cannot hear me??  An occasional word sometimes comes thru.

    I mean the person I am talking on the other end can't see me either

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Maybe you are looking for