OK I got my Diamond. Now what? HeHeHe

I grabbed up a Diamond SLi MB and a MSI 7800GT. I installed my 3700+ and my Kingmax RAM. It runs OK. I am ordering a Opty 175 and some Muskin EP RAM in a few weeks.
OK so I got Drivers installed and updated and then flashed to Bios 1.8. I noticed the I no longer have 183 RAM speed in the Bios but I did gain 1T command rate so some good came with the Bios Update. I would like to have both though. Anyone know which Bios's have both 183 and 1T and work OK with a San Diego?
I also setup the SilRaid. Nice and quick.
I can post at 236HTT easy enough with the 1.0 Bioos but I would like to do that with a later Bios. For now I just use A64 Tweaker and Clockgen to overclock which is fine for the short haul. I haven't paid much attention top Bios versions of late though so help me out if you can.
Thanks.
Oh ya I guess thgs makes me a part of the gang in here huh??? LOL

Quote from: Tiresmoke on 15-January-06, 14:46:14
Hey I can give it a try. Typically I stay with MSI bios's for obvious reasons...
I usually try to stick with them too... but I'm not above using a modded BIOS. The knowledgable enthusiast "modder" will usually go the extra mile to try to fix some sort of irritating problem that a manufacturer won't bother dealing with.
After all, OC'ing isn't an "officially" sanctioned activity, right? And who says that you have to say what you're using...
A modded BIOS was the only way I could get my old ABIT NF7-s board to achieve it's potential. If you skulk around some other forums (heaven forbid) you can quickly find out which modder's are "players".

Similar Messages

Got the .jar now what?

i have a GUI application...i used the deployment wizard
got the .jar file ...now what in the world do i do with
the .jar file???

try:
c:\JBuilder\bin\java -jar port1.jar port.classi think you have forgotten one "\" between the path and the java exe :-)
I think you should also try to see if the manifest file inside the jar is correctly created. if not the jar file will not work as an executable file. You can search through the forums with "jar executable" to find more information about it.
Hope this helps.
Zerjillo

Got an iphone, now what?

I was a bit surprised to find that there were hardly any instructions that came with the iphone about basic things like how to insert a sim card.
I got the pay as you go option and am charging it now but I'm not sure if the sim card needs to be inserted before charging and how to do it.
Are there any good online instructions for the iphone anywhere?

I found this on another site.
Does it sound like it makes sense and will allow me to do what I want?
'I've seen some people here asking how to sync with their home and work computers without having to erase the iPhone. This is simple.
Copy your ~/Music/iTunes/iTunes Library and ~/Music/iTunes/iTunes Music Library.xml to a flash drive at home and bring it to work.
Then copy those files to the same location on your work computer. Then launch iTunes. You'll notice all the music you have at home show up, but it's ALL missing. This is okay. Just delete it all in iTunes.
Then drag your ~/Music/iTunes/iTunes Music folder onto the iTunes icon to get all your work music back into iTunes. Now you can sync with both computers because iTunes thinks it's the same computer. Nice.
I hope this helps some people who may not know about this trick. It's working for me.
EDIT: This is important. Make sure you've enabled "Manually Manage Music and Videos" in the iPhone tab in iTunes. If you have it auto-sync I'm pretty sure it will replace the music which would defeat the purpose of this trick."

Error while updating software on iphone and it got wiped out, now what?

I was updating my iphone software through iTunes, and there was an error. Now my iPhone won't even show a screen, just an image of a USB cable pointing to an iTunes logo. I rebooted both phone and computer. Nothing. I uninstalled iTunes and all related software per Apple instructions and reinstalled iTunes. Reconnected and...Nothing. Now I am screwed. I can't even use my phone as a phone let alone anything else. Good news is I do have everything that was on it backed up -just how do I get my phone to work again?

What is the error when you try and restore the phone after connecting to iTunes? Use this support document to decide what to do for specific restore errors. http://support.apple.com/kb/TS3694

Buttons change texture on object - got a script now what ?

I'm newbie on Javascript and I'm trying to figure out this script that was posted by Michael Kreutz on this forum ;
---- This is the script that is used on the 3D object -----
//##### changeDiffuseTexture #####
function changeDiffuseTexture() {
textureRes = new Resource("pdf://yourTexture.jpg");
textureImg = new Image(textureRes);
//#### if you want to call the mesh by index #####
objectMaterial = scene.meshes.getByIndex(0).material;
//##### if you want to call the mesh by name instead of index #####
//objectMaterial = scene.meshes.getByName("theMeshsName").material;
objectMaterial.diffuseTexture.setImage(textureImg);
---- This is the script that is used on the button ----
getAnnots3D(0)[0].context3D.changeDiffuseTexture();
I'm making a proof of concept to show this (future) client the possibilities of 3D pdf.
I show a 3D object and besides the 3D object are several buttons that change the texture of the 3D object.
This 3D object has 2 materials ; one is just diffuse color and the other one has a UVmap on the diffuse map.
So when one clicks on a button the script should load up the correct UVdiffusemap-image.
I use this plugin to attach the resource images for the UVmap
http://www.graysonlang.com/Attach3DResource.api
Now for the question part :)
** When I apply the "getbyindex" version and click a button it replaces the diffusecolor part of the object with the image, instead of the UVmap part - how can I tell javascript to look for my UVmap .. in other words where can I see what the index of this material is -> I've tried changing the numbers in both scripts but that didn't do it !
The "getbyname" didn't do anything -> where can I see the name of the UVmap part ?
** How can I apply the different images to the different buttons ? Or should I do this in the .js-file that is attached to the 3D object ?
** Is there a way to make the change of texture realtime - without first having to click on the 3D-window ? That is what happens now when the texture of the diffusecolor part changes !
Any hint is welcome -
K.

I'm newbie on Javascript and I'm trying to figure out this script that was posted by Michael Kreutz on this forum ;
---- This is the script that is used on the 3D object -----
//##### changeDiffuseTexture #####
function changeDiffuseTexture() {
textureRes = new Resource("pdf://yourTexture.jpg");
textureImg = new Image(textureRes);
//#### if you want to call the mesh by index #####
objectMaterial = scene.meshes.getByIndex(0).material;
//##### if you want to call the mesh by name instead of index #####
//objectMaterial = scene.meshes.getByName("theMeshsName").material;
objectMaterial.diffuseTexture.setImage(textureImg);
---- This is the script that is used on the button ----
getAnnots3D(0)[0].context3D.changeDiffuseTexture();
I'm making a proof of concept to show this (future) client the possibilities of 3D pdf.
I show a 3D object and besides the 3D object are several buttons that change the texture of the 3D object.
This 3D object has 2 materials ; one is just diffuse color and the other one has a UVmap on the diffuse map.
So when one clicks on a button the script should load up the correct UVdiffusemap-image.
I use this plugin to attach the resource images for the UVmap
http://www.graysonlang.com/Attach3DResource.api
Now for the question part :)
** When I apply the "getbyindex" version and click a button it replaces the diffusecolor part of the object with the image, instead of the UVmap part - how can I tell javascript to look for my UVmap .. in other words where can I see what the index of this material is -> I've tried changing the numbers in both scripts but that didn't do it !
The "getbyname" didn't do anything -> where can I see the name of the UVmap part ?
** How can I apply the different images to the different buttons ? Or should I do this in the .js-file that is attached to the 3D object ?
** Is there a way to make the change of texture realtime - without first having to click on the 3D-window ? That is what happens now when the texture of the diffusecolor part changes !
Any hint is welcome -
K.

Installed 10.5.7 update - got problems. Now what?

Hi,
I did install said update that is now buzzing this community. Tried both (normal and combo) and neither work - programmes crash when I try to print.
What do I do now?
I am not a apple tech and need step by step instructions! I also can't afford to pay someone cause I am poor!
Can anyone help me...?
please...

10.5.7 gave me spontaneous system crashes when running on battery power, with plenty of battery life left. To clarify: what I mean by 'spontaneous system crash' is, the machine behaves exactly as if the battery had been pulled out. Years ago I experienced similar behavior with old batteries that needed replacing. Currently, though, I actually have two young batteries that I alternate between, and the problem occurs with both batteries. I no longer have a laptop. I have a desktop.
I am sure it is not the logic board-- everything was fine until immediately after 10.5.7 upgrade. I bet that this is related to older logic boards, though-- I have the first intel MBP that came out. I have seen two people posting on discussions here saying that logic board replacements fixed their apparently identical problems. Perhaps these posters' logic board fixes happened because the upgrade replaced the older board with a more modern board that is not susceptible to the bug.
I will be downgrading to 10.5.6 ASAP, and I am not happy about it. Time machine is no help, because you can't revert the OS only, you have to lose all new data created after the system update.
It appears from the various postings here that upgrading to 10.5.7 is a kind of russian roulette. Many people (perhaps even most) have no problems, but then there are others (like me) who experience catastrophic problems. I would say to those who are considering the upgrade: are you feeling lucky?

Got my NANO, now what?

I just came back from the SF Apple store where i bought my 4 gig black NANO, i will open it and use it tonight after i get off work, few questions thought...
Out of the box, do i just connect the NANO to my USB 2.0 powered HUB and charge it? And can i transfer music at the same time?
Should i upgrade to iTunes 5 before connecting NANO?
And how can i extend the battery life, should i let the battery die after the first charge?
Thanks in advance.

I just got back from purchasing one at the Towson Town Center mall in Maryland. I was surprised that they had them in stock. The Apple Store didn't even have anything up yet to advertise the Nano...not even a display sample. One of the associates actually had one, holding onto it like it's the crown jewels.
Before arriving at the store, I was torn between the colors...but after seeing the black one, I was sold in 10 seconds. Watching Steve's presentation, you do get an idea of how small it is, but seeing it in person it's a totally different perspective. The width is smaller than a credit card, same length. The screen is bright and easy to read. The black one shows the controls better on the click wheel vs the white one.
With a purchase of a Nano, you get a limited edition black cardstock shopping bag, advertising the nano on both sides of it. I got stares as I was walking back to my car (I was scared that someone is going to snatch it from my hand). I would have wanted a t-shirt instead.
I promised myself that I'l going to wait until someone starts selling a case for it, but I cracked under pressure! Apple...you need to stop making such beautiful products because I'm truly broke! : )

Just got a Macbook - Now what?

I just received my Macbook (2.16 GHz, 120 GB) in the mail yesterday. I've installed all the programs I need and such but I'm a little confused about what to do about the battery. I've been a Mac user for a while but I've only used desktops. I know that Mac batteries are not the greatest in the world so what should I do to keep it at its best? Should I keep my laptop plugged in at all times?
-Megan

I suggest you don't use your battery unless you need to. It does it no harm to sit idle in your machine while plugged into AC. I don't really know what to say about your bad battery statement and am wondering why you think Mac batteries are bad? The biggest problem recently was SONY batteries having a problem. All the manufacturers that used them had problems.
I have my MacBook plugged in almost all the time except for when I calibrate it or need to use it in the other room for a few minutes. Don't worry about running your battery flat every time before you charge it. That is not good for li-ion batteries. In the links below you will find all kinds of god information on battery care. If need any more help you have come to the right place.
These are good things to know about the MacBook and it's battery.
MacBook reduces processor speed when battery is removed while operating from an A/C adaptor
Apple portable computer's battery does not show a full charge in Mac OS X
You should calibrate your battery at least every month or two. I do mine every other month and have had no problems.
Look here and here for some good tips about battery care.

Got an iSight, now what?

Greetings
I got an iSight but other than family no one I know uses Mac.
Until Skype fixes their incompatibility issues with iSight and comes out with video on their Mac client, I understand there is not many other ways to use my new toy with PC users (I know about iVisit and Mercury and don't like them).
So I would like to turn the Mac users community and make new contacts with other iSight users.
Would there be a place/ web site for this?

The information in the Users Manual that came with your iSight should give you a place to start.
Using iSight will give you some more suggestions.

Just got a PS4 now what?

Hi all, I received my PS4 from {removed per forum guidelines}. It's my first I have owned since a SNES, although I did play a fair bit of PS2 at Uni.
Anyhow, what games are good (2 player ideally) what should i wait for, Whats this internet subscription thing, can I play online and so on... i have seen ther eis a subscription charge?
Thanks!

"Last of Us: Remastered" is a must own.
'Infamous Second Son" with its stand alone DLC "Infamous:First Light" is also a great game.
'Killzone Shadow Fall" is a great continuation of the series
"Little Big Planet 3" is a great party game, its not just for kids.
"Bloodborne" if you enjoy DarkSoul style games you will love this one aswell.
"Uncharted Remastered and Uncharted 4" Coming soon so look out for those.
These are some of the retail games I can think of but their are others only available on the PSN Store.
"The Order 1886" is an interesting concept but not worth more than a $20 purchase at most. Even better just rent it. You can beat it on the hardest setting in under one day.
"Warframe" Space-ninjas is the best way to describe the game and I personally backed the game back in alpha before it was available on PS4.
Its free to try so give it a shot. You don't have to pay any money to enjoy it. Money is solely for cosmetics and for shortcuts.
Posted this on previous post with similar question.
As for the subscription, "PS Plus," it is required to play online for non free-2-play games. If I remember correctly that's all you need it for; netflix, crunchyroll, spotify and other services don't require it.
The benefits of having it is free games every month that you get to keep playing as long as you have an active subsription. You also receive discounts on games, dlc and movies.

HT5312 I got mixed up, now what do I do? I forgot the answer to my security questions

How can I reset my security questions?

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email BEFORE you forget the questions/answers.

I got this..now what?

How do i go about tracking this?
8155418046 : Order number:1600
Tracking number 183.193.293.32
Courier. MC07

hate to give bad news but thats verizons ip addy not a tracking number

HT4623 I updated my iphone 4s on my computer - I lost a lot of pictures - it gave me messages that I had sent back in June and now it wont allow me to play any of my itunes on my phone - any got any solutions to what I should do? HELP

I updated my iphone 4s on my computer - I lost a lot of pictures - it gave me messages that I had sent back in June and now it wont allow me to play any of my itunes on my phone - any got any solutions to what I should do? HELP

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

HT1414 I just got a replacement iPhone 5 (64MB) for one with a cracked face, and tried to restore it. Got an error message saying the iTunes could not restore the iPhone because not enough free space is available on the iPhone. Now what?

I just replaced my iPhone 5 because of a cracked face. I backed up the old phone to iTunes. When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone. Now what?
I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this. They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.

I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!

I restored my ipod, when I went to put everything back on it, I got a message that said, "an error writing to the device, can not sinc. Then it said the required disc can not be found. Now what do I do, I have all of this music and apps that I can't get

Before I restored my ipod, I backed it up then I updated and restored. The problem is when I went to put everything back on it, I got a message saying that an error writing to the device, can not sync. Then another message appeared saying that "the required disc can not be found. Now what do I do?

Try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Also, delet the iPod Phot Cache folder for the second error. For its loation see:
iTunes: Photo sync creates iPod Photo Cache folder

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

OK I got my Diamond. Now what? HeHeHe

Similar Messages

Maybe you are looking for