Ok I have a iPod 4G 32GB, all my apps freeze and then close or don't even open at all. I tried deleting and reinstalling as I thought the app was the problem, but it still did the same thing and I have only wasted 5.3 GB. What's wrong with it?
MAKE IT LITERALLY 8 TIMES I'VE BEEN KEEPING TRACK THAT SAFARI CLOSED ON ME WHILE WRITING THIS ALSO DOWNLOADS SPEEDS ARE SLOW CAN SOMEONE HELP ME BEFORE I BREAK THIS ******* IPOD I ONLY USED 5.3 GB AND MY APPS KEEP CLOSING OR DON'T EVEN OPEN HEELLLPPP!!
You will also notice that this is the correct answer in most cases.
Have you tried all of them?
These are indeed the basic troubleshooting steps for your most every ipod problem.
Similar Messages
-
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Hello. So i Have tried to be using my Home Button, but everytime i seem to push it it wont go back to the home screen or quit an application. I havetried restarting ym Ipod and turning off and on but it doesnt seen to work. I think it might be the actal button that is sbroken or something. Does someone mind helping me out what wrong?? please?? Thank you!!!!!
Try this:
Calibrate Home Button
1. Open a stock application like Calendar, Weather or Youtube
2. Hold down the power button until the "slide to power off" control appears
3. As soon as you see it, press the Home button and keep it pressed until the red slider disappears and the app is forced quit to the Home menu -
Whenever I "export" a QIF file from my bank I get a File Action confirmation window popup. I have the correct application selected and I have it selected to "open" and "always do this action" but the popup always pops.
I have checked the applications tab and the correct application is selected.
How can I prevent the confirmation popup window please ?Cheers for the reply.
I have deleted the rdf file but no difference. I still get the opening file box popup.
From the resetting download actions link. Both lines in the about:config are missing.
I have also tried switching the download option for the qif file to use a csr file but that also opens the confirmation box.
I pulled this from the rdf file
<RDF:Description RDF:about="urn:mimetype:handler:text/x-qif"
NC:alwaysAsk="false"
NC:saveToDisk="false"
NC:useSystemDefault="false"
NC:handleInternal="false">
<NC:externalApplication RDF:resource="urn:mimetype:externalApplication:text/x-qif"/>
<NC:possibleApplication RDF:resource="urn:handler:local:C:\Program Files\Microsoft Money\System\msmoney.exe"/>
</RDF:Description>
<RDF:Description RDF:about="urn:scheme:webcal"
NC:value="webcal">
<NC:handlerProp RDF:resource="urn:scheme:handler:webcal"/>
</RDF:Description>
<RDF:Description RDF:about="urn:mimetype:externalApplication:text/x-qif"
NC:path="C:\Program Files\Microsoft Money\System\msmoney.exe"
NC:prettyName="msmoney.exe" />
Not sure if that helps.
Thanks again for the reply -
I really want to know what I should do. I don't have insurance on my phone, am I still under warranty?
You should still be under warranty. First try rebooting the iPhone by pressing and holding both the Home and Sleep buttons at the same time until the Apple symbol appears, ignoring the power off slider. You should get indications of life within about 10 seconds while holding the buttons.
-
I log into ITunes with a User ID and Password that worls. When I try to purchase a song or an App I get a message that my Apple ID has been disbaled. When I follow the steps for resetting the ID I get the same message.
Contact itunes support.
-
I am reinstalling W7 on my iMac and keep getting the black screen. I had installed W7 before when using Snow Leapord but W7 doesn't want to install with the latest drivers (v4.0). W7 was working with Lion but I had to uninstall W7 and now I cannot reinstall.
NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
When trying to re-install Firefox, it allows me to download it but when I hit run, it says its extracting and after that nothing else happens.
Are you sure the virus is cleaned off your PC?
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
Download and Install Microsoft Security Essentials [http://windows.microsoft.com/en-US/windows/products/security-essentials http://windows.microsoft.com/en-US/windows/products/security-essentials] (not an official endorsement, but I personally recommend MSE as an awesome permanent anti-virus)
Double check for all Windows Updates.
Then, delete the firefox you downloaded, go to [http://www.getfirefox.com www.getfirefox.com], redownload and try to install Firefox again. -
Why dose mozilla open and then closes as soon as it opens. Then i can open it again with no problems
Mozilla will open then closes right away. Then I will open it again and it will stay open this time.
*https://support.mozilla.org/en-US/kb/firefox-crashes-troubleshoot-prevent-and-get-help
-
I already try these steps but I still got the problem I can't make a video call at all or receive .
Here som other steps you can try;
Make sure that you have an internet connection
Make sure that you have a valid Apple ID (check here: myinfo.apple.com). Note that your Apple ID to register FaceTime on iPad 2, iPod touch, or FaceTime for Mac must be an email address. You can create a new Apple ID or make changes by visiting myinfo.apple.com and using the “Manage your Account” part.
Tap Settings > FaceTime to see that your email address is verified. If your status is saying “verifying,”; then try toggling FaceTime off and on (Settings > FaceTime OR FaceTime for Mac: FaceTime > Preferences)
Try turning FaceTime off and on again using the following (iOS: Settings > Phone OR FaceTime for Mac: FaceTime > Preferences)
Make sure that FaceTime is enabled (Settings > FaceTime.)
Make sure that the camera for FaceTime is not restricted (Settings > General > Restrictions.)
Tap Settings > General > Date & Time to check date and time are set correctly.
Make sure that you are using the correct method for calling the person. iPhone user: Use the phone number; iPad 2, iPod touch, or FaceTime for Mac user: Use the email address -
i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT
Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
Regards. -
what is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????
It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.
-
my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.
If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni
Maybe you are looking for
-
What cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro
what cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro
-
How can I retrieve selected checkboxes by user into a JPA application?
Hello, I'm developing an app in JPA, still learning this, I'm displaying some checkboxes which I save into a List, then I separate the selections and put them into an Array, which I convert into String and that's what I store into MySQL table, this i
-
Is Copy Paste Pans & Zooms Possible in Photoshop Elements Slide Show Editor Slideshow?
In the Photoshop Elements Slide Show Editor, someone wants to create a unique pan and zoom effect for one photo and be able to apply it the the rest of the photos in the Filmstrip without having to do that on an individual photo basis. In the Slide S
-
IOS 7 update interrupted, phone won't operate
So I had to delete stuff off my phone to get enough space for the update. it started updating and after an hour it had a small amount left. I was told it can take up to 2 hours, but I was at work and had to leave so I disconnected it thinking it woul
-
Copy and paste from one timeline to another results in audio problem
Hi, I'm trying to create a showreel by copying and pasting segments of edited sequences from the original timeline into a new 'showreel' timeline (in a separate project). I keep having a problem with the audio when I paste the sequence. Dialogue seem