OK I'm Stupid. Volume Help, Please

When connecting to most CD players, etc., I get little to no vol. on most songs. Thanks in advance for the help.

Connecting how? Do you have the volume limiter set too low?
And most importantly, why are you connecting the iPod to a cd player?
Cd players are output devices only.

Similar Messages

Just got a 5530, ringer volume help please

Hi everyone,
I just got a 5530 xpressmusic from newegg, and I can't seem to be able to figure if the volume rocker on the side of the phone can change ringer volume, or just the speaker volume when on the phone. It seems that a volume rocker should be able to adjust the volume of the ringer, but it doesn't on my phone, I have to go to profiles to change the volume.
Any help would be appreciated, thanks!

From my experience with Nokia phone, that's exactly how it's meant to be. Every phone I've had was/is Just like that. I see nothing wrong there
Show your appreciation. Hit that kudos button real hard

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

Can anyone help please with my Time Machine, I have been getting the following message The backup disk image "/Volumes/Mac Backup/Stephen Smith's iMac.sparsebundle" is already in use.

Can anyone help please with my Time Machine, I have been getting the following message The backup disk image “/Volumes/Mac Backup/Stephen Smith’s iMac.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

Help Please! My volume has disappeared when I play music on my iPhone 4s (since I updated to iOS6). Help please!?

Help Please! My volume has disappeared when I play music on my iPhone 4s (since I updated to iOS6). Help please!?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you tried ALL the troubleshooting steps? If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!

New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!

Raya Alfa wrote:
...there are some that are mp3 and it will be extremely hard to pick them from the lot.
Not true. Select "Kind" as a sort category by right clicking the headings
Then click to sort by Kind
If your Import Settings are for Apple Lossless, AIFF, AAC or whatever the majority of your files are, convert MP3s to that file type.
I've presently got 17,000+ files in my library, and they're ALL MP3 or M4B(Audiobooks). If they weren't when I got them, I converted them. Saves a LOT of hassels with just this type of situation. Besides I have two non Apple MP3 players that WON'T work with other file types besides MP3 so, EVERYTHING I have has to be MP3.

My volume control is disabled after plugging in and unplugging headphones, Help Please...

Dear all, this is my issue, I have since the beginning (October 2014) with my iPhone 5S, 64GB: My volume control is disabled after plugging in and unplugging headphones, Help Please...

This should not happen if you have the output volume in System Prefs/Sound set low. Have you tried setting the ITunes player volume at top left a bit lower?

My stupid iphone turned off sundenly and now is saying i have to connect to itunes and it wont connect to itunes i need ur HELP please please please!!!! whoever helps me u r an amazing person!!!!!

help please my iphone 4 turned off sundenly and now is not working its says to connect to itunes but when i get to itunes it shuts offf or doesnt work!!! i am depley need help!!! if anybody can help that wuold be amazing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! HELP

The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way.

Photoshop Elements 6 on Mac help please !!!!!

Hi there,
I need help please !!!!!
I have PSE 6 for my imac and bought myself a NIKON D60 so far so good. I have installed PSE 6 which comes with ADOBE Bridge CS3
I have bought a book as well as I am new to photoshop and in fact DSLR cameras.
I have got my photos into Bridge OK by the way they are JPEG format. According to the book I can open the JPEG in camera RAW by either selecting the JPEG and then pressing cmd+R or by selecting the JPEG and select open with and camera RAW should be available to selct.
I cannot get of the options to work any ideas please
Secondly I have taken some photos in RAW format and put then into Bridge again I cannot get the camera RAW interface to open with these neff images.
If I try to open the image PSE 6 opens and gives me an error that the file format is not supported by PSE 6
Am I missing something here as I have been trying for a week now !!!!!
Sorry if this comes across a stupid question but it is new to me
Chris UK

There's no "theory" about it. You should be able to open a raw file from bridge by double-clicking it, but it will open in ACR in PSE. You can't just use ACR within bridge in PSE, if that's what you're trying to do. To open a JPEG in ACR, go to file>Open in PSE and choose Camera raw as the format after you select the file but before you click Open.
If you've correctly updated ACR, bridge should show you thumbnails of your raw files. If it doesn't try emptying the Bridge cache.

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

Firewire Port not working, URGENT help please¡¡¡

Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.

I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!!

Need Urgent help please? I need to restore from a previous iphone backup.

Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
I'll be anxiously awaiting any help you can give!
Thank you!!

rwmac22 wrote:
Hopt and OneOrangeTree, Thank you both very much for replying!!
It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

Can't Left Click in Flash Player Settings Panel - HELP PLEASE

Hi and thanks for taking the time to read this. Believe me it is a fraction of the time I have wasted trying to resolve this issue.
Basic problem is:
I am trying to stream to Ustream but since downloading AFP11 for my Windows PC when I open the Flash Player Settings panel i can't left click on anything. It is set to deny but I can't click allow, or close or any of the icons.
Right click does work.
I have followed countless instructions in other forums from other posts that have encountered the problem on Mac and older versions of AFP but as yet none of the solutions have proven succesul.
I have tried all of the following but nothing has resolved the problem.
1. Uninstall and reinstall Adobe Flash Player (although this is impossible using Google Chrome) and restart computer.
2. Unistall flash and install older version. (made no difference on Google Chrome and on IE8 had no flash whatsoever).
5. Uninstall older AFP and reinstall AFP11.
4. Uninstall Google Chrome and restart computer.
5. Uninstall QuickTime (I got this off http://www.techsupportforum.com/forums/f10/flash-player-not-working-properly-please-help-1 61552.html) and restart computer
6. Last resort use keyboard shortcuts such as tab, enter and ctrl+arrows. This either didn't highlight the panel at all or if it did I still couln't select allow, or close the panel itself so was no help either.
So now I'm back to square one.
Now here's a really bizarre thing... I am using a shared laptop computer and if I use my colleagues profile where she hasn't updated her AFP to Adobe Flash Player 11 the settings panel is responding just fine. IT'S THE SAME PC!
I know I am alone with this problem but someone out there has an answer. If you can help please let me know how to fix this problem where I can't left click in the Adobe Flash Player settings panel.and I will be eternily grateful.
many thanks
nik

OK the amount I hate myself right now is more than a fat guy's self loathing for raiding the fridge at 2am for Pizza but less than an armed robber who's accidentally shot a pregnant woman in the stomach during a shootout. but not much less.
So after I had miraculously got the Flash Player Setting Panel to work again, (after deleting QuickTime and leaving the window open for abut an hour it just started working again) I then got enticed into downloading the ustream producer software.
While downloading it informed me that it would only work with QuickTime.
Stupidly and Optimistically hoping it would remove the need to use flash player altogether I downloaded and installed both.
I then discovered to my horror that Ustream producer is not a patch on Vidbalster and that it was not capable of delivering the same level of broadcast.
I then opened the flash player settings panel on ustream and... the problem has returned!
This means I am 99% sure that QuickTime IS the cause of the problem so I have uninstalled QT off the PC. I have also uninstalled Ustream Producer.
The thing is though, now no matter how many times I restart, or uninstall and reinstall Adobe, or Google Chrome, I am once again UNABLE TO LEFT CLICK IN THE FLASH PLAYER SETTINGS PANEL. AAAARRRRRGGGGHHHH!!!!
What did I do? I fixed it and f***ing broke it again!
Now it properly will not come back to life! the problem is not solved and i urgently need help.
Why does Adobe Flash Player Settings Panel and Apple QuickTime hate each other so much that they've got to ruin my life?
Help forum PLEASE!
Regards,
nik

My MacBook Pro encounters an error when partitioning for loading windows using Bootcamp Assistant. I deleted the partition that was there in order to upgrade to Bootcamp 5 but now I am struggling to get Bootcamp 5 to complete the job. Help please.

I am struggling to Partition my MacBook Pro using Bootcamp 5, can someone help, please. I previously had successfully loaded Windows 7 running Bootcamp 4 on the same machine. When I upgraded to Windows 8 I started encountering problems. My trackpad would not work and it required me to load Bootcamp 5" as I was running 32 bit this is not supported by Bootcamp 5 I had to completely delete the previous partition, but now I can't repartition as it goes halfway and says an error has been encountered and Bootcamp cannot partition this drive.
I do not know how to defragment the drive in Apple as I can in windows nor can I clean it up to maybe get everything in neat clusters, maybe somebody can help me solve this problem.

Sorry Bobthefisherman, this was not helpful. I had already gone through these pages before coming to you. What I have discovered however is that when Bootcamp Assistant deleted the partition, it did not create a single volume but created three partitions instead which maybe the reason why it cannot create the new part ion parameters I am asking it crate. So I took it to the geniuses at Apple who suggested that I reformat the drive and reload everything again! and this might solve the problem. We'll all know whether this is helpful once it finishes the formatting of the hard drive. This process is taking a very long time to complete so I am leaving it overnight for it to complete. I will keep you updated on progress. I am also told that Apple is struggling with Windows 8 drivers and I may not be able to use that, so I am going back to Windows 7 even though I was beginning to like windows 8 very much.

HELP PLEASE cannot install Mac Osx

hey I really need help please!
I tried to modified my dock using my resources folder in the dock components but I surely did something wrong cause when I tried to click on time machine, it said that I need the right osx version.
So I restarted my computer but it just wont start, i see the spinning gear over and over again. So i decided to reinstall mac os x tiger and to reupgrade to leopard afterwards.
I restart m computer, hold C, get to the install process and when I need to choose my volume, I choose my HD, the one in the iMac but its says cannot install on it because of a Volumecheck problem...
I really need to reinstall it without loosing my data on it I have some important photos for my work, I NEED THEM!
HELP!

Hello and welcome to the Apple boards
If you have been using Time Machine, you can restore your system from it using the Leopard DVD and following the instructions on this link:
http://www.peachpit.com/articles/article.aspx?p=1091577&seqNum=6
You might first try booting from the DVD and repairing your HD first. The tools are in the Utility folder on the DVD
You boot into the DVD by starting the computer and holding down the "C" key.
Hope this helps a bit.

OK I'm Stupid. Volume Help, Please

Similar Messages

Maybe you are looking for