OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that
OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?
Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.
Similar Messages
-
I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks
Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888 -
I have an iPod touch and also have the iHome.... When I first hooked it up it played music fine.....but now when I hook it up it says accessory unavailable for iPod touch and I've resetted it 2 times but still no music comes thru the iHome speakers
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar -
I have an apple id and also have the credit card details in it. I am trying to buy credits on Viber, but it is not purchasing and telling me to contact Apple iTunes support center. What do i do now?
Contact Apple iTunes Support Center as directed in the message.
-
My daughter and I both have an iphone 4, she can no longer send me msgs, it is showing as delivered on her phone, the wee bubble shows on mine to show she is replying to me but i am not getting the msgs, help, anyone know how to fix that? Thanks x
Apple is having server issues, they hope to have it resolved in 24 hours.
-
I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2 -
when i'm editing my video in the timeline it looks perfect, but when i save the video and replay it on quicktime it has these weird lines? does anyone know how to fix that?
As Tom states, that's interlacing.
Interlacing was invented when the TV was born, to carry 1/5 the frame with each Hz of the electricity rating. In the US, that's why you use 30 fps (or 29.nnn) in the US and we use 25 fps in europe as the electricity is 60Hz/50Hz.
Interlaced video should ONLY (I repeat ONLY) be used for analog TV signal transports.
Each and every digital TV set today, including all the computer screens, is Progressive, updating the full frame at each screen refresh. And most TV's even refresh much quicker, newest TV's refresh a 800Hz..! (giving then problems with the newest LTE spectums..)
If your source media in interlaced, ask why! And stop shooting interlaced.. ;-)
If you have interlaced video, make sure you apply the DeInterlace setting when you import and transcode it. -
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
So, my IPod touch is running 5.1.1 and is slow and sometimes unresponsive. According to Apple it will not update to iOS 6. It is a 32GB, 3rd Generation. I want the new features but it's making me mad. I do not want to jailbreak. As this would void my device from Apple. I love the features iOS 6 has to offer but I don't want to put out anymore money. IPods are expensive enough, Should I use blobs? Or would that make my device worse. Plus I do not want to pay $20.00 for a chat and have to wait all day to someone who I can't understand on the telephone. someone help me please.
For the slowness:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?
Thanks for the responses, they have been very illuminating!
This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile. -
My Apple TV suddenly stopped working. When I hit a button on the remote the light on the apple tv flickers but nothing else happens. Anyone know how I can fix this?
I had the same problem; Apple TV was working proper then for no reason I got the continuous blinking front LED. The Apple TV has no sound or video output at all. I tried reseting the Apple TV via my Apple remote controller but that didn't do anything for me. I finally called Apple and they told me that the way to fix my box is to reset the Apple TV to factory default. So I had to attach the Apple TV to one of my Apple computers and launch iTunes. Once iTunes was running it recognized my Apple TV and I clicked on the option to restore to factory default. After the restore my Apple TV now works properly. My final action on the Apple TV was to sign into my account and enter my password.
-
My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says "iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wifi." I do not know what to do.
Same situation. Had to pull out the Mini to research this. The Apple logo has been on the screen about five min, oh, just went black. Home brought it back and popup is gone. Wonder why this happened to many folks.
-
I just updated the software on my iPhone to the ios5. I've gotten everything to synce but my ringtones. Does anyone know how to get my ringtones from my iTunes onto my iPhone???
Try this thread > http://www.mac-forums.com/forums/ios-apps/253296-ios-5-not-syncing-purchased-rin gtones.html
edit by: cs
Maybe you are looking for
-
Scaling of SDK Speedometer not working
Hi Expert, I need to build a dahsboard using some gauges. Therefor I'm trying to use the speedometer delivered with the SDK sample pack. Getting selected data from from the DS is working fine. But I'm not able to set a different scaling via ticks and
-
Poor quality convertion from adobe reader to word
Good day, I received a poor quality convertion from adobe reader to word. Can I send the original to anybody for help or a better convertion. Enjoy your day Regards Johan de Beer
-
I am trying to use a DateFormat object as a Rederer for a table column. This is the Code I'm using: DateFormat df2 = DateFormat.getDateTimeInstance(DateFormat.SHORT, DateFormat.MEDIUM); //defines a date format. list = new javax.swing.JTable(); TableC
-
Hi, We recently upgraded about 24 WLCs (4402s and 5508s) from 6.x to 7.0.98.0. In order to support these WLCs through WCS, we also need to upgrade the WCS to 7.0.164 which is currently running at 6.0.132.0 (Linux OS). Same is the case with Wireless L
-
Hi all, can you plz tell me how to deploy map viewer to JDeveloper 10g i try do it but i cant. i try to add the extension to jdeveloper but didn't work. regards