Ok im having a problem with the mini ipod thing...

Ok first of all ill tell you what happened first.
first I connected my Ipod and updated it. after that I put it on hold to let it charge. I left it for like 5 mins. the it didn't say "don't disconnect" so I unplugged it then when I tried to turn it on Nothing I've plugged it into my comp and my comp no recognize it and still no turning on... ive tried to restore and reset from both on the computer and manually. all i have is one word HELP!!!!!!!!!!!!!

Please use a simpler subject line for your message rather than duplicating everying you say within the body of the message.
There isn't much we can do to help.  Without seeing any code, we can't even hazard wild guesses as to what your program is doing and why it isn't working the way you expect.
How are these motors controlled?  DAQmx outputs?  Serial communication with a motor controller?  Some other way?
Also, your username is completely inappropriate for a professional forum.

Similar Messages

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

    I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
    This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
    [email address removed to protect your privacy and security]
    <! [email protected] -->

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • Hi,  I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

    Hi,
    I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

    What program are you using for this editing?
    We can ask a Host should move your query over to that forum.

  • Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

    Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
    Thanks!
    Angela

    You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
    I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
    Best of luck.

  • Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

    Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

    Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4))    I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

  • I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

    I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

    Is there a DropBox icon up in the menubar you can click on & see quit DropBox?
    https://www.dropbox.com/help/41

  • TS1702 I am having a problem with the apple app Numbers.  It has been waiting for a week.  I can not open it or delete it

    I am having a problem with the apple app Numbers.  It has been waiting for a week.  I can not open it or delete it

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • TS1702 I am having a problem with the Simpson tapped out app it won't connect to the server it only happens on my iPad other iPads are ok

    I am having a problem with the Simpson tapped out it will not connect to the server it only occurred on my iPad not any others in my home

    Hey Jerryd820,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides suggestions if you are having issues with a specific application:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702
    6. Reinstall the affected application
    Remove the application from your device and reinstall it.
    1. Touch and hold any application icon on the Home Screen until the icons start to wiggle.
    2. Tap the "x" in the corner of the application you want to delete.
    3. Tap Delete to remove the application and all of its data from your device.
    4. Press the Home button.
    5. Go to the App Store.
    6. Search for the application and then download it again.
    Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
    7. If the issue is still unresolved
    If you continue to experience the issue, contact the developer of the application for further assistance.
    Thanks,
    Matt M.

  • TS1702 Is anyone having a problem with the smurfs app

    Just wondering if anyone is having problems with the Smurfs app.  Click on it to open it, it opens &amp; then shuts down almost immediately.  Can anyone help?

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • I am having major problems with the latest update for my itunes!

    I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'. I have completely uninstalled itunes but now it wont download at all. Have tried downloading it 4 times tonight already. Anyone know how to get it to download? Or what to do?

    I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'.
    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Aduio problems with the mini!  help!

    I have serious audio problems with my Mini right now -- Please Help!
    When I play iTunes, iPod, etc. I hear very bad static, and start and stops; like its an audio feed from the radio, a scratchy audo feed, that pauses.
    At first i thought it was the old speakers that i run through the old display; but I plugged in Bose headphones to the mini itself and got the same bad, sound. this just started, can anybody help? thanks.

    Check your Audio/MIDI Setup, making sure that your audio out settings are for 44.100khz, 2ch-16bit. I've seen some apps that arbitrarily change it to 1ch-8bit, which can cause the poor sound you're describing.

Maybe you are looking for