Ok now I can open the motion projects but I can't save them
Hi
I followed the steps specified at the "famous" trick http://support.apple.com/kb/TS3061 and now I can open the motion files. The bad news are that now I can't save them wich means that I find myself at almost the same point that at the beginning of the issue. I tried too installing the QuickTime 7 but nothing...
Did any one solve the problem completily using that trick? Am I doing anything wrong with the steps maybe?
Thank you
Hi again!
I found the solution! Yes. I have to admit that the trick was ok!!! But I thought it wasn´t because I opened files from a folder that I had been administrating with the user account before and then for any reason when I changed to the Administrator account Motion didn't allow me to save any files into this folder.
¿Does it make sense at all?
Thank you any way Patrick
Similar Messages
-
I have an apple account and my internet is fine and I can open the app store but not download apps, I think the problem is in the settings.
What happens when you try to download an app ? If you aren't seeing the price/free button to be able to download them then do you currently have Settings > General > Restrictions > Apps (under the 'allowed content' heading) set to 'Don't allow apps' ?
-
I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..
I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)? -
I just installed the new upgrade and now I cannot open the Solitaire game. How can I fix this?
Check to see if the developer has released an update to the app.
-
I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.
Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search -
i can open the other website but not with twitter, there's a lock icon on the top beside the word twitter, what should i do?
yes,safari
if I add twitter to my homescreen so if I open it,the title twitter appear on the top
but can't run,and there's a lock icon beside it,
and I try to open tumblr too but it's can run and no lock icon besides -
How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button. Thanks!
Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way. -
in capture, i can control the dvd camera, but i can't see the image, it says "preview disabled."
PhilippeHi,
I posted the same issue.
I upgraded FCE 3 to FCE 3.5 on Mac 10.4.6
At first I had nothing: every attempt at capturing resulted in shutting down of FCE.
After upgrading to QT 7.1.1 I now have device control but the capture proces is aborted as there seems to be "no video" (miniDV deck)
Everything is normal with iMovie 6
Frank -
When I make a call, I can hear the other person but they can't hear me? Tried everything. Took it to the local ATT store and all they could tell me is it shouldn't be happening and to take it to an apple store? Any ideas?
Try to isolate the issue. Use earphone and if the issue still happens then it might be the phone issue.
- If earphone works fine then it may be the mic on the iPhone. Try cleaning the debris on the iPhone. Finally a restore of the device and try to set it as a new device. Tha will isolate if it is a software or hardware issue.
- You can take the phone to Apple store once you have tried all this. -
When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?
take a look at the link
Iphone: hardware troubleshooting
http://support.apple.com/kb/TS2802 -
I can't publish one project but I can publish others.
When I try to publish, the Export to HTML checkbox is greyed out. I can click on all other checkboxes, but in every case the process seems to hand up on my question pool and then crashes. I've tried copying and pasting all slides to a new file, that just carried the problem to a new file. I moved the question pool to a new file, but publish worked fine with that. I tried deleting the question pool from the project and publish worked the same.
I cleared the Captivate 5 cache, made no difference. The project has no animation or sound, 45 slides with optimized images and ten random question slides. The only demanding feature is a plethora of rollover captions on about 15 of the slides.
I'm not sure what is causing this problem, and I don't have time for it.
Anyone have ideas?I can't remember the last time I had time for a problem. Does one ever have time for problems?
Anyway, it sounds like you have some element or object in your project (probably in the slides that are not part of your quiz scope) that is either corrupted or making Captivate dizzy for some other reason.
The usual method of fixing this is by trial and error deletion of slides or groups of slides to narrow down the location of the offending item/s.
Do this: Make a copy of your entire problem project and experiment with it:
You say you've been able to delete the entire question pool without fixing the problem. That's good. It means you can start by deleting those. Republish to confirm that the issue still exists.
Now delete the entire first half of your project and republish again.
If the issue is still there. Do Ctrl + Z to replace the slides you deleted, delete the last 50% of your project instead, and republish.
Theoretically, if the issue is anything to do with something on a slide, you should have found deleting the first or last half of the slides would tell you in which half of your project it was.
Once you know which half has the problem, delete the first half of THAT half, and republish again.
Get the picture? I find that on the rare occasions where I've been having this issue, I can find the offending slide in a matter of minutes this way.
Now if doing the above doesn't get rid of the problem, it must be in something that isn't on a slide. The next things to try are turning off the TOC and playbar, turning off LMS reporting (sounds like it must be on because you said the HTML box was greyed out), and not having any preloaders.
Does the problem still remain now? -
During a recent Skype session our iPad in England stopped sending images as if the camera had been turned off. My family can hear and see me in Australia, but I can only hear them in England. Does anyone know if there is a settings button or something that might accidentally have turned the camera off? Thanks Glen
Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider -
When making a phone I can hear the other caller but they can't hear me
No one can hear me when i make I phone call but I can hear them ??? I've tried the voice memo and that seems to work fine !!! Has Any one got any ideas that could help me please ???
you need to isolate wetyher or not its a hardware issue.
make a voice memo. (if there is sound then, your bottom mic is fine.)
Make a video (if there is sound then your speaker mic is fine.)
if those dont work restore to factory settings and setu p as new, if the issue persists, setup replacement
if you have sound, try resetting your network settings. (settings general>reset>reset network setting THIS WILL DELETE ANY SAVED WIFI PASSWORDS.) -
With windows internet explorer you can very easely pin point all your favourit websites on the left side of the screen when you open IE. I want the same for Fire fox.
Shortcut: Ctrl+B
Or add a Bookmarks button: Right click at the right end of tabs and click Customize. -
When I open Pages and get a blank page, the curser is no longer working. Meaning, I am now unable to type a document as there's no place to begin. Never had this happen before. Interestingly, if I create a text box, I AM able to type, but not without creating the text box first. I'd love to go back to the way it was...you create a blank page, curser comes up, you begin typing. Any ideas? Thanks.
You have started a PAge Layout document instead of the expected Word Processing document. Have a look in the New template chooser and you'll see that there are two types of documents/templates.
Maybe you are looking for
-
Should I go with a dual core or quad core MacBook?
Hi all, I am going to be a college student this fall majoring in a science related field. My first question is what processor I should go with. I am looking at either a 13" MBP with a dual core i7 and 8 GB of RAM (750GB HD), 13" MBP w/ a dual core i5
-
Default outgoing email address for multiple emails
How do I set up one of my many email addresses on my I-phone to be the default outgoing email for all of them?
-
Cisco Prime Infrastructure 1.3 stops working
Hi, I have strange behavior with our CPI at the customer site. With no apparent reason we have noticed that the web interface was not accessible. After the restart all proceses were in up and running state and we were able to log in again. This is th
-
Adobe Air on iMac G5 Intel Core Duo 2133
I have just tried to download an update to Adobe Air and been notified that the updates will no longer work on my iMac. This is the quote from their web site : Adobe will be discontinuing support of PowerPC-based computers and the Windows 2000 operat
-
10.6.4 Update removed 'Internal Speakers' now only 'Digital Output'
I have recently purchased the latest iteration of the MacBook Pros. Up until today, I had been running 10.6.3 and decided to jump forward and update to 10.6.4. The update seems to have since killed audio output from the internal speakers. If I go to