OK Number Format in Intective but only cientific notation in other mode

Hi, all.
In BI 11.1.1.6 my report work well in interactive mode but in other mode (PDF, Excel, Html, RTF) the summation filed only display in cientific notation.
Your help is highly apreciated
Thank you very much
Carlos

Hi All,
the workaround was changing the regional settings in control Panel on windows XP.

Similar Messages

I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

Hello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

APEX cannot accept any other number format mask except 999G999G999G999G990?

Hi, guys:
Can anyone help me on this problem? I have a report with a column of number type, but I want to use accounting format mask such as <1234.56>, however. whenever I choose any other format model for this number column, I got the error message as "ORA-01481: invalid number format model", I can only choose Numeric format mask: 999G999G999G999G990
Anyone could give me a hint on this? I am using APEX 4.1 and Oracle 11G R2. Here is my query for report
select uh.descr, inv6.userkey, inv6.invno, inv6.amt-pa_temp.Subtotal_Payment over_short_amount
from
(select pa6.invoicekey, sum(pa6.amt) Subtotal_Payment
from payments pa6
where trunc(pa6.pmtdate)<=to_date(:P55_DP_VPF_PROD_DATE,'DD-MON-YY')
and pa6.type not in (5)
and pa6.invoicekey in (select pa5.invoicekey
from payments pa5
where trunc(pa5.pmtdate)=to_date(:P55_DP_VPF_PROD_DATE,'DD-MON-YY')
and pa5.type=2
group by pa6.invoicekey) pa_temp, invoices inv6, userhdr uh
where inv6.userkey=uh.userkey
and pa_temp.invoicekey=inv6.invoicekey
and pa_temp.Subtotal_Payment<>inv6.amt
and abs(inv6.amt-pa_temp.Subtotal_Payment)>1000
order by 1Thanks a lot!
Sam

I found the cause. Thanks!

Number format issue - comma (1,5) instead of period (1.5) before decimals?

I am using an input field of data type Number. In Norway we use a comma before decimals. I can't get this to work in VC. Have tried to set Number format with 'Local format' checked but this is not helping. (even if my portal is showing Norwegian texts as supposed by the language setting)
If I uncheck this and go to Custom formatting I get to set my own format. NSTR(@OPERATORER_N, ".2") gives me two decimals but with a period as the decimal point. NSTR(@OPERATORER_N, ",2") does not work.
I do not want thousands separator.
Tips?
Henning Strand

Hi,
Check the se Threads i think you definitly get the idea or solution.
But every body ask about to get dot separatot instaed of Comma Separator since this can be get easyly with Language Portal Settings
Thousands separator
http://help.sap.com/saphelp_nw70/helpdata/en/38/2d9b732beb4c68bba2962602a7d6bd/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/26/64fb472a144a0dbaf88f5ec75d9270/content.htm
http://oregonstate.edu/dept/computing/warehouse/PDF/8-reports.pdf
Re: Supressing Currency & Thousands Separator
Re: Special Number format Mask Visual Compser
All the best
Govindu

Number formats in Excel

I have an rtf template for AP Trial Balance. All numeric columns are formatted - e.g.
<?format-number(SRC_ACCTD_ROUNDED_REM_AMT,'##,##0.00')?> OR
<?format-number(sum(current-group()/SRC_ACCTD_ROUNDED_REM_AMT),'##,##0.00')?>
When outputting to rtf, number formats look great, but when outputting to Excel, they are inconsistent - sometimes formatted properly, sometimes not. I get a string of numbers like:
-200
-180
-94,500.00
-445.5
-1,629.00
etc.
Is there a way to get Excel to present numbers properly?

Yes, but they will not be numbers for Excel any longer. Try doing this:
="<?format-number(SRC_ACCTD_ROUNDED_REM_AMT,'##,##0.00')?>"

2 photo stream but only 1 icloud account.

Hi,
I've 2 photo streams on my iphone but I've only ever signed in with 1 apple ID. How do I go about deleting the one that's not in use? Thanks.
w

Yup. I've got a camera roll and 2 photo streams. 1 updates, the other just doesn't seem to. Not sure what i did to end up with the 2 accounts. Tired switching off photo stream on iCloud but only 1 disappears.

With the ISO 8, I'm getting FULL SIZE pictures identifying the caller. But only some, the others in my contacts are still TINY.

With the ISO 8, I'm getting FULLSIZE picture identifying the caller. But only some!
The others in my contact list still come as TINY. Is there a place where i can make them all full size?

Got the same issue ever since upgrading to Facebook for iPhone version 4.1 that was released a few days ago - let me know if you have any luck.

I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod.

I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod. I have already resynced it, any suggestions on how to fix the problem without having to restore my iPod to factory settings.

Becaise the digitizer is broken in that area
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

TS1702 My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.

If a Custom field is defined as Text in Project Server, but is actualy a number field, is it possible to number format it in a report (BI)?

The users have defined the field as Text, and now the field contains data, so it is not possible to change the type.
While including the field in the Report and choosing number format, it is not getting formatted (for example, if I want seperators like a comma for thousand).
Is it possible?
Thanks in advance.

Hi,
I don't think so you can directly format a text field as number in SSRS. For doing this first you have to convert your text field into Integer or Decimal (whatever is your requirement) into SQL query.
Then using SSRS textbox properties you can define the number format also can use the 1000 separator from SSRS then.
To perform this, I have created a "Test" table with 2 columns only "ProjectName" varchar(50) and ProjectDuration Varchar(9).
Then using SQL query first I converted ProjectDuration datatype from Varchar to INT using below query
SELECT ProjectName, CONVERT(int,ProjectDuration) ProjectDuration
FROM Test
Then using SSRS interface changed the ProjectDuration tect box property like this
That's all I am getting below desire result
Hope this helps you and let me know in case have any doubts.
Thanks !!!
Sachin Vashishth MCTS

I've lost/misplaced my iPhone 4s but only have the serial number to work with. How do i find it?

Hello, I've lost my iPhone 4s which is black, contains 16gb and cracked screen. I have been looking in and out of the internet. Since i found my serial number can i somehow locate the phone? I know the app Find my lost iPhone. But only problem is i didnt connect it to my iphone when i had it. Its technically not my phone anymore (use it for my ipod)
HELP asap please
J

If you did not activate Find my iPhone then you've truly lost it. Unless, of course, you or someone else finds it? There is no way using the serial number and before you ask the IMEI number.

I have lost my ipad in the lecture room just 2 hours ago, but i donot have any other apple divices and i donot instoll itues in my computer, the only thing i got was my account number and my email. so what can i do to find it??

i have lost my ipad in the lecture room just 2 hours ago, but i donot have any other apple divices and i donot instoll itues in my computer, the only thing i got was my account number and my email. so what can i do to find it??

Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with your bank or any savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

Is it possible to setup serial number format only accept 10 digits?

Hi,
I am using TestStand 3.0.
Is it possible to setup serial number format only accept 10 digits?
Also I want to input part number before start test. How to do this?
Thanks,
Ben

It's the modelsupport2.prj in components\models\TestStandModels\
There is also a preuutcallback.seq example in the shipping examples.

I paid for the entire second season of Homeland but only 4 episodes have downloaded. I have an email confirming my purchase and giving me a receipt number so what should I do now?

I paid for the entire second season of Homeland but only 4 episodes have downloaded. I have an email confirming my purchase and giving me a receipt number, so what should I do now?

If you click the Store > Check For Available Downloads menu option on your computer's iTunes does that download them and/or do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes (TV programmes won't show in all countries) ? If other TV programmes show there but not those then check to see if they are hidden : http://support.apple.com/kb/HT4919
If the above doesn't find any extra episodes (and I assume that there are more than those 4 episodes available in your country's store) then you could try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

OK Number Format in Intective but only cientific notation in other mode

Similar Messages

Maybe you are looking for