Ok videos on my ipod dont play audio

ok i got my video into itunes it works has sound and everything then i convert it and the converted version has no soun how do i fix this
Dell Xps   Windows XP Pro  

Go back to your last post, and read to my last reply. (Answer my questions.)

Similar Messages

  • TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

    does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

    According to the compatibility chart on this page, yes it does.
    http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
    B-rock

  • Why does my ipod not play audio?

    my ipod touch 4th gen 16gb will not play audio unless it has headphones in. it is second hadn but the seller said nothing about this and the ipod is in perfect condition except for this. i have tried putting the headphones in and out and resetting the ipod, neither of these made any difference. when i play a video or a track without headphones in, the volume slider disappears as if there is no audio file. alarms and facetime sound effects etc still play so i dont think the speakers are broken. please help.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • My ipod nano 5th gen  wont play movies or videos on my ipod but plays them on itunes when i click on it the screen flashes black i have tried taking the movie off my ipod and putting it back on but it still won't work what should i do?

    My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes.  When I click  on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Video works on iPod, then becomes audio -- no pattern of why...

    Ok, I copy my mp4 videos onto my Ipod (video 60gb) from my Windows XP computer with latest iTunes..
    The videos worked fine yesterday on my iPod.. I tried to look at them today, and they were being treated as audio files..
    This is not the first time this has happened to me.. The half-assed solution is to copy the videos again from the PC to the iPod and it will fix it for a day or so, but they always go back to being audio files.. And its so random that I cant trust the video to be there when I need it now... (I'm a filmmaker and its really nice to have my film trailer with me at all times)
    I've tried to reset all the settings on the Ipod
    Ive made sure the "TV Out" is set to "off.
    Possible problems
    I manually sync the iPod music..
    I use the Photo's feature (which seems to be only Automatic syncing) and I've noticed that video files usually screw up and turn to audio when Photos gets updated..
    But it happens other times too.. This morning I manually re-copied all my video files to my ipod, and they worked immediately after i disconected from the PC.. Later that day (without reconnecting to anything) I was tryin to show somebody my trailer today, you guessed it -- it was an audio file... It is REALLY frustrating - especially when i bought the dang thing for this specific purpose...
    Any suggestions? When it works it really is a cool feature...
    Thanks
    -=James

    James,
    I'm not sure if this help you, but it help for me. I was having problems with video files on my Ipod. 95% of the time videos start fine. After 30 seconds (more or less), audio start to fail and video stop. After a couple of seconds, video resume but without audio.
    After troubleshooting my Ipod (Video 60gb), even re-installing everything again, I decide to "downgrade" the firmware. Yes, I said "downgrade". After this, all videos run smoothly and with audio. No problem so far.
    I use a program "Ipod Wizard" to downgrade the firmware.
    What I'm telling is that maybe is not a setting problem, maybe is a firmware problem like I had.
    Als, my personal recomendation is to keep all setting to auto-syncronization. Including music, photos and video files. At the beginning I uses to sync manually but a lot of problems came up.
    Remember, first of all, BACK UP everything

  • IPod only playing audio, no video

    My iPod isn't playing video, but is playing video; but I've followed the instructions in the FAQ (turned TV on OFF; made a seperate playlist for videos - for some reason, my audio got mixed in the video playlist - but it still won't working).
    Any help? =/

    bump

  • Why does my ipod dont play video podcasts

    My does not play video podcasts as a video it plays the as an audio.

    An iPod nano 6th gen isn't compatible with playing video, so it just plays the audio.

  • Videos on my ipod have no audio

    I converted my videos to be formatted to my ipod but when I tried to listen to it the music video had no sound or audio at all.
    When I play the video on itunes it doesn't have any sound either but the unconverted video does have audio?

    what software are you using and are u converting it to mp4. i have some freeware that i convert with to mp4 dont convert to m4v if you have that option

  • Itunes video goes green and only plays audio, any reason or help to explain or fix?

    iTunes playing videos, but only audio and screen is green, any suggestions of fix or reason?

    Well, First of all, some of my .PDF files started to disappear without any reason, a year or so ago, a couple of months ago the "message" started to come up everytime I tried to shut it down or re start it. Then, the YouTube videos went "green" on Internet Explorer, and then on Google Chrome too! A couple of weeks ago any video saved on my Laptop, started to go "black", the same pattern, only audio could be heard, no images. It took a little while, I mean, after turning on my Laptop, 30 minutes or 2 hours later, tops, the YT videos would turn green,after watching 2 to 6 six videos on YT. and black, on Windows Media, at the same time, whenever I tried to play any video.
    Then I tried the link that I posted before. And my Laptop is getting slower after that, the display has "blinked", 1 or 2 times this past week. Internet Explorer "crashes", and I have to re-open my "session" to see my previous visited sites. I think this last part, is normal, since everytime IE fails and you have to "close the program", and then open it again, it doesn't scare me.
    What does scare me is to have a virus, or mallware. I have an antivirus, McAfee Security Center. And, I don't know what else to say.
    I use my laptop to record music, I have 2 programs for that, and 1 or 2 more that came with a guitar pedal and a keyboard, and I don't know if I should have just one, instead of 2 programs (DAWs) installed on my laptop, does that affect my Laptop?
    Thanks for replying.

  • What videos can an ipod classic play?

    so i just tried downloading some video podcasts and it seems i can only download certain ones. i would like to know if i rent or buy some movies through itunes will i be able to watch them on my classic? i dont want to pay for something and not be able to watch it.

    From here: http://www.apple.com/ipodclassic/specs.html
    Video
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    B-rock

  • Video Clips That Do Not Play Audio

    I know it's something simple.  But I can't seem to find the solution.
    I am editing .avi video clips (talking heads) with audio which was recorded on the camera audio tracks. The video clips all play just fine with the accompanying audio in the Source Monitor as well as in the Project Panel player.  But when I Insert the editied clip onto the Timeline, the video appears, while the audio does not.  It's clear I have done something to my settings or the like, as this problem just appeared where previously it did not exist.  Can someone direct me to the source of my problem and the fix for it.  Thanks very much.
    I have noticed that when selecting a clip in the Source Monitor and choosing the Display Mode with the pop-up menu that 'Audio Waveform' is now greyed out.
    Tom

    Bill,
    Did you mean to say "does not look problematic." or, as you wrote, "does look problematic."? 
    To answer your question, the latter; miniDV tape capture originally took place using another PC and was stored on an external HD.  I downloaded the original miniDV tape files from that HD the other user had captured to.  I will say this. The original notes regarding the tape logs made by the person who digitized footage indicates that the original HDV digitized footage (.mpeg) was simply "digitized."  While the .avi footage was converted using Cineform; his logs also show the audio conformed using cineform as well.  Is it possible this is the source of the wonkiness I am experiencing with audio and perhaps the source of all of my trouble?
    To that end, if I were willing to start the project over entirely, could I simply delete the .avi files from my PC, begin a new project and import the HDV (mpeg) footage into PP project panel editing in that format?  Considering the .avi DV files have a window burned Time Code which would eventually require me to conform the original HDV footage (mpeg) to the .avi (rough/fine) edit, would I be better off working with the original HDV footage to start with?
    Oh.  And to answer your last question: Yes, I have had no troubles whatsoever with scratch V.O. audio files I have recorded myself.  I have recorded them at 24-bit 48K sample rate .WAV (poly) files and simply performed a drag and drop to my desktop before copying them over to my data disk where all the other files for my project reside.  Each and every V.O. file I create shows up as a Waveforem on the Timeline.
    I greatly appreciate your guidance.
    Tom

  • Video in swc doesn't play audio

    Hi, I have a flv on the timeline. When I export a swf the audio plays. When I export a swc and instantiate the movie clip that houses the flv on the timeline, the audio doesn't play. Is there something I should look for to fix this? Any tips?
    cheers.

    I too, found that A3 Slideshow to be very cumbersome... I gave up and went back to iMovie. Much better and quicker, especially adding music and "knowing" exactly where the music will start and end. My daughter's wedding was last week and I wanted to show quick shots of the 'happenings', using A3 slideshow (bad mistake). I was totally embarrassed; songs overplayed to the wrong location and played songs that were previously deleated (and they didn't show up as songs to be played, go figure). Anyway, iMovie was and is so much better. A3 slideshow process needs to be worked on.

  • Click wheel ipod only plays Audio out of the left side

    When i plug my ipod in through the dock conection there is only audio from the left side.ie... when in the car, when pluged in a made for ipod docking boom box..... and it does not look like there is any damage to the guts of the dock conection
    ibook G4   Mac OS X (10.4.3)  

    That indicates a problem with the headphone jack. I would make an appointment at the Genius Bar of an Apple store. If the iPod is defective, within warranty and not abused Apple will exchange it at no cost.

  • Videos/trailers on IMDb dont play at all, whereas they do on other browsers, any suggestions?...I have minimal add-ons and have practically just stated with the RC

    Trailers work fine with chrome, only add-ons I have are ghoster, omnibar, speed dial and tab utilities

    Problem solved...It was the ghostery add-on, which is a shame

  • My iPod only plays one song at a time

    I don't store any music on my iPod - only music videos. They all play fine, and they're stored as properly tagged music video files under Menu->Videos->Music Videos. After I first synced them from my PC, I noticed that they also all appear under Menu->Music as songs. I can play them all just fine, either by selecting one through Menu->Videos (in which case it plays as a video) or by selecting one though Menu->Music, in which case it plays as a regular song with a little picture displayed instead of the video.
    So far, so good.
    The only problem is, I can only play one song at a time. I navigate through the menu, select either a song or a video, and the iPod will play that just fine, get to the end, and then bring up the menu again.
    How can I get it to play the one I select, and then just play other random songs? It makes no difference whether or not 'shuffle' is selected, it still only plays one then stops. Also, putting the songs in a playlist doesn't seem to make any difference.
    Any advice gratefully received.

    Are you sure you don't have Shuffle on? There are a couple of ways to Shuffle on a 5th Gen. iPod. You can't simply choose Shuffle Songs from the Main Menu and shuffle the entire library...or you can go to Settings > Shuffle and choose Songs or Albums and apply that to any playlist you select. The behavior you describe is what happens when Shuffle is turned on and items are set to Skip When Shuffling (an option found on the tracks under Get Info). If Shuffle is on, you should see the little green crossed arrows in the upper right of the iPod window.

Maybe you are looking for