OK, what is it about G4 towers suddenly w/o power?
I got my dual Gigabit Ethernet G4 tower from work when they got rid of Macs about 4 years ago (keep hoping they'll change their minds). When I first got it I had the typical no power problem and a new battery solved the problem (but I had to order it from OWC, the one I got at a local store didn't work).
Right before Christmas we shuffled furniture around in the family room and unplugged the Mac. Now it's dead again. I've tried two different new batteries (one from OWC), I've done the simple reset and the sit for 30 min reset and the sit overnight reset and the take out all the ram and the cards reset. Still nothing.
Now, it appears I'm getting something from the power supply because when I had everything plugged in, the monitor was showing that it was getting power. Does that mean that it's more likely the motherboard than the power supply?
I know it's had a good long life, but I'm really sorry to see it go. I got a good deal on a core2 duo Mac Mini. I think the g4's likely dead; if the problem is the power supply, it's going to be a bear (and $$$) to replace, and although I see motherboards on eBay for a good price, I know I could get that in, struggle to figure out how to replace it, and the darn thing still might not work. Plus the motherboard I just purchased would also be like 8 years old.
So...what is it about G4 towers and suddenly not starting up? I see this problem frequently on the support boards. I love Apple (right now I'm stuck on a Vista laptop and...ugh), and I know that this tower had a long life, but doggone, why do they just suddenly drop dead without any warning?
If you have a meter, unplug the AC power plug from the wall and wait a minute, then measure the battery in the holder, working. If you do not see 3.2 Volts or higher, the battery, regardless of its history, is not working.
After fiddling with any Hardware, you should press the tiny reset button for a quarter minute \[with the Mac nominally off, but the AC power plug plugged in]. Then wait at least five seconds before proceeding. Avoid momentary presses, they can crash the microprocessor that controls the clocks and drain your battery in a day. If nothing seems to change, do the procedure again.
If you still have no response, disconnect the drives, remove everything except the processor and memory, do a reset, and try for a startup chime.
If no chime, use this diagram to look for Standby Power on pin 9 of the main DC power connector:
58561- Power Macintosh G3 (Blue and White) and Power Mac G4: Power Supply Voltage Test
Similar Messages
-
Mail what to do about gray rectangle suddenly covering inbox messages
A few days ago a gray rectangle showed up partially covering messages in Mail. This is only in Inbox. There is no gray rectangle when starting a new message or viewing anything else on the device.
Any idea why this is occuring and how to fix problem.
ThanksHello there, harvsh.
The following iPad Troubleshooting Assistant has some great all-around steps that might just help:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/#section_1
Although all steps are usefull, in the "Restart iPad" section, I would make sure to cover the resetting steps as well:
To reset iPad, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
Additionally, in the "Close App" section, I would recommend closing all apps you see there.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Since upgrading to OS X 10.8.2 a few days ago, Safari will suddenly zoom in on web pages (happens on multiple sites) when I scroll or move the mouse -- any one know why and what to do about it? Thanks!
It really isn't a well thought out 'gesture' when a normal scroll action can result in an unwanted zoom but disabling SmartZoom wasn't an option for me—one of those with eyes that tire easily when reading very small text on a 27" display.
For a while I used command-+ and command-'-' to read small text but that isn't supported in some apps and for Safari it often leaves the browser in an less than perfect state when moving to the next page. I also tried option scroll to zoom the whole display but that was not desirable, either.
I finally settled on leaving SmartZoom enabled and remembering to double tap with one finger whenever the undesired zoom happens. It happens so often that the double tap is almost a reflex action for me. -
When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
International Roaming and Whats it all about.
Roaming and what’s it about?Roaming is when you are no longer able to Pick Up your home Network (O2-UK). This is normally when you are in another country. However it is possible to pick up French Network when in UK and the Irish Networks when you’re still in Northern Ireland. But if you phone is displaying anything else beside O2-UK or BT Cellnet (On Some Older Phones), then you are Roaming on a Foreign Network and Roaming Charges will apply if Services are used. Is O2-IE the same as O2-UK?Answer is no. O2-IE is a completely independent business to O2-UK and therefore Roaming Charges would apply.O2-IE (O2 Ireland) and O2-UK (O2 United Kingdom) are both Part of the Telefonica Group, but this is all and is 2 Separate businesses Do I need to Activate Roaming?If you are an O2 PAYG Customer then Roaming is activated automatically as you can only spend what you have in Credit.O2 Contract customers may need to call 202 to confirm they have Roaming Activated on their account if they have never used the service before or had issues in the past. How does Roaming Work?When you travel outside your Home Network, your Mobile Phone Sim will ask the Roaming (Foreign) network first if it can use the services on their Network. (You IMEI number of your phone is also sent to verify it’s not the Stolen / Missing Database as well) The Foreign Network will take details from your Sim card and go back to the International Centre and check if O2 has an agreement first to use the Network and then if the Sim card is activated to use the Roaming. (This is why there is a delay sometimes in first switching on your mobile to you getting a signal and a Network Name) If all comes back ok, then the Sim will receive instruction and you notice the Roaming Network Name shown on your phone. What you may not know is that when the phone is authorised to use the Roaming Network, It is given a temporary allocated foreign number of the country you are visiting. So you may have someone calling you and they may notice that the Ring tone suddenly sounds different in their Earpiece and not like the UK Ring. This is because of the Foreign Number allocated and that you are roaming on their Countries Network. One this you will never know though is the Temporary Roaming Number as this is only a Forward number and changes. So what charges do you pay for when roaming?Making Calls? Yes you pay for all of the Call.Receiving Calls? Yes you pay for the Roaming country Inbound Part of the Call.Sending a SMS? Yes you pay to send a SMS.Receiving a SMS? No it’s free to receive a SMS.Sending a MMS? Yes you pay to send a MMS.Receiving a MMS? You may be charged for Data Usage to receive the MMS ( I never have on O2, But I know other UK networks charge)Data Usage Is all chargeable The Person who is Calling or Texting you from the UK. This is where a lot of confusion becomes and people become worried regarding charges. Simple Fact to Remember:Even though the person you are contacting is abroad. You are still only calling their UK Mobile Number. So treat it as they are still in the UK. So for example: If you have free UK Text allowance, it will still be Free (Your Texting a UK mobile Number)If you have Free UK Minutes, then again you are calling a UK Mobile Number, so it will use your UK Minutes Allowance.If you don’t have Free Allowances, then you will be charged at your normal standard Rate of ringing a UK or Texting a UK Mobile number Couple of Questions and Answers that may come in useful: Q) I’m abroad and my friend is abroad, will I be charged to contact my friend as I’m only calling a UK Mobile numberA) Yes, even though you are calling a UK Mobile Number. You are not in the UK and the person you are calling isn’t, so you will pay the Roaming Charges to make the call and the person who is receiving the call will pay the inbound part of the charge Q) Why am I charged twice for Voice Mail Messages?A) When someone tries to contact you and you don’t answer, the call is then passed back to the O2-UK voice mail as a return call, So you pay for the Return part of the call even though you didn’t answer your Mobile. Then when you want to listen to your voice mail, you pay to make the call and listen to it. So this is where Double Charges apply Q) Why are inbound SMS free when I’m abroad?A) This was set by the EU Telecoms Parliament, that any EU Mobile Company must allow their users to allow incoming SMS for Free anywhere in the world. Q) What is the Difference between Roaming and Home Networks?A) Your home network is in your network where you purchased the Sim from. So if you purchased your Sim card in the UK and from O2, your home network would be O2-UK and you would be allocated a UK Mobile number.Roaming is when you are no longer on your home network. So for example you go to Spain and you pick up Telefonica ES. This mean you are Roaming on a Spanish Network. If you have any other questions please ask and I will gladly try to answer them and will keep editing the 1st thread to make it easier for everyone to read.
All calls to the UK to landline numbers use the international code +44 and drop the first zero. Mobiles you normally just dial the number as you would if in the UK but on some US networks you do have to use the +44.Some info here to call the BVI from the US.http://www.countrycallingcodes.com/results.php?FromCode=United+States&ToCode=British+Virgin+IslandsBe awre of the call costs from the USA :When in: Calling: Landlines - per minute99pMobiles - per minute£1.49 Receiving calls - per minute99pSending texts - per message49pCost per MB of using data:Data usage£6
-
What's happened about the Ovi contacts and the con...
Hi,
What's happened about the Ovi contacts and the contacts list ??
OMG, were deleted all the contacts suddenly !!! is a tragedy!!
also , Many users have reported me this problem
I wait for a Nokia Staff Reply
Real Name: Marco Amesty - Spanish Nokia Advisor. Follow me @elcoxx
DO NOT SPAM say thanks pressing the buttonWell, yesterday I spent all day without contacts, and today I woke up with the contacts back!
i Think it is solved!
Real Name: Marco Amesty - Spanish Nokia Advisor. Follow me @elcoxx
DO NOT SPAM say thanks pressing the button -
This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
What is this about and how can I retsore access to Firefox on my pc?If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back
Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
> -
What is it about InDesign CS5 that someone would get this error message?
Hi,
What is is about the .swf file that is generated from the InDesign CS5 interactive workspace that someone would get the following error message when they go to view the site I created?
"This file may contain newer information that this viewer can support. It may not open or display correctly. Adobe suggests that you upgrade to the latest versions of our Acrobat products blah blah blah."
The site doesn't seem to work for four Mac users, but works fine for at least one PC user.
I'm trying to figure out how to save the .swf file down to Flash Player 9, which I've done by exporting a .fla file, then adjusting the Publish setting in Flash CS5. But that throws a wrench into the works...all the animations go haywire by continuously looping and the scale of all the text elements on the first page is much larger than it should be.
Thanks, SteveJohn Black3 wrote:
Many of my songs in my iTunes Library no longer play. I get this error message: "The song xxx could not be used because the original file could not be found. Would you like to locate it?
this usually happens when a user moves or deletes files in the finder - a sure way to upset iTunes.
did you move or delete files in the finder ?
I cannot locate the song.
if you let iTunes manage your library, all your content will be in <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)/music. did you look there ? tried a spotlight search ?
if the files are really gone, and have been purchased from the iTunes store, see Downloading past purchases from the App Store, iBookstore, and iTunes Store. -
What is it about this markup that breaks DW CS3 Design View Editing?
Folks:
I'm attaching very simple --and apparently completely valid-- markup that generates the text shown between the markers below:
------------start----------------
yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda badda.
------------end----------------
As you can see by examining the file, it contains only an span enclosing text and spaces, and some following breaks. This file passes DW validation: no errors or warnings.
If I open this file in DW CS3 Design View, select and delete the last word, "badda", the entire text --every "yadda"-- is also deleted. All that text is really gone -- if I immediately save the file and re-open it, there is no text content at all, just the span pair, spaces, and the trailing breaks. This is completely repeatable.
When you edit this file, do you get the same result?
The attached file is a cut-down, simplified version of a production file that exhibits this issue. (That file also passes validation.) When I delete single words, entire content paragraphs disappear. So this is not just a point of curiosity. I need to figure out how to fix the production code and avoid this problem in the future.
What is it about the attached markup that causes this issue? I've fooled around with this code quite a bit and the best I can figure out is that DW is confused when both the start- and end- span tags are followed immediately by a line break. Inserting a space in either place makes the issue go away. But the production code doesn't have any occurances of this pattern. And, anyway, line-breaks have no significance to html, just for source-code formatting, right?
Am I missing something incredibly obvious?
TIA
hen3ryNancy O:
Thank you for your response, which gave me valuable clues to understanding the issues. (Specifically, it led me to re-read and understand better the nitty-gritty of the HTML4 specs, section 7, "The global structure of an HTML Document", especially 7.5.1 The BODY element.)
I believe you are saying --in sum-- that to be reliably edited in DW, each source file must comprise a syntactically correct and complete HTML Document.
I am attaching a second file, "badcode2.html", modified substantially as you suggest. It passes the DW validator, the validator.w3.org test, and the www.totalvalidator.com test. No errors or warnings.
I do this: Launch DW, open this file, choose Design View if necessary, select the final word of text, "badda", and activate Edit-->Cut (or Delete). As before, all the other text is deleted as well. This is repeatable.
It seems to me this sample code satisfies your general principle. Could I be misapplying the three validation tests? Or that passing these tests does not assure the document is syntactically correct and complete? Can you recommend other tests?
I'd like to add the following two points as a matter of background and a bit of niggling:
--I'm aware that complete HTML pages must contain <html> , <head>, and <body> tags, although the HTML4 specification seems to say <body> tags are optional. All my production pages, as served, contain these tags. My underlying design is a php template with individual content files incorporated by inclusion. There may be only one set of <html> , <head>, and <body> in a page. The "outer" template code provides these tags, and individual content files cannot contain a nested set -- so they must be "bare" markup. Is DW able to support this design, in which "bare markup" files are seemingly unavoidable? Is there a mechanism analogous to DW Design-Time Style Sheets to provide virtual existence of these tags so "bare markup" files can be successfully edited? I've looked for such a mechanism but not found one. Or some completely different method?
--You specify the inclusion of <p> or <h1> tags within the body. Is there some special significance of <p> or <h1> with respect to stable editing in DW? My reading of the HTML4 spec indicates that a single block element is the minimal requirement for body content. Either of these tags qualify, right? But so does <div>, and that's what I use in my current example. Am I misunderstanding something?
Bottom line, I'm looking for a pragmatic solution for my problem: Once in a while, among hundreds of structurally similar "bare markup" pages I edit in DW without any problem, I lose data. If inserting an additional tag into all my content include files eliminates these occasional problems, I'm willing to do that, as long as: (1) There is an arguable technical basis for the addition, (2) the added tag does not produce anything visible on the served page, and (3) the validators don't flag the extra tag.
Suggestions, please!
Thanks,
hen3ry -
after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?
First, select sender(s) as VIPs. Then the VIP category will appear.
To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left). -
I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
Does anyone know what to do about iCal colors changing.
Does anyone know what to do about iCal colors changing. Ever since ios7 came out I have many problems. I kind of feel like Apple has become Microsoft at twice the price?? Anyway, today all my calendars (iPhone, iPad, iCloud and on my Mac) all changed colors from the customer colors I had set. I have about 5 calendars.
I was able to change them back on my Mac, my iphone and my ipad, but not in iCloud. Once each of the ones I changed updates / syncs it reverts to the incorrect colors again. I have tested back and forth, and it is definetly coming out of the iCloud.com. The web site will not let me chance colors, so once it updates / sync, all my other devices and calendars sync to the purple in iCloud.
I could go on and on about my frustrations with the apparent lack to testing, and the irony around Microsoft and their "bugs". It is more important that I find a cure, as this is really annoying.
Has anyone else seen this todayDon't spend a lot of time trying to change it. It's an iCloud problem that's happened before, and when it happened in August it went back to the correct colors in a few days. Just be careful when you add new items to the calendar to use the right calendar (even if the color is wrong), otherwise you'll have things out of synch when the correct colors come back.
-
What is new about CRM 7.0 pricing
Hi Folks,
Please help me In knowing what is new about CRM 7.0 Pricing compares to CRM 2007?
Edited by: nnrsdn68 on Oct 27, 2011 12:36 PM
Moderation: Locked. Rule number one: Try to find the answer first. [See rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Joaquin Fornas on Oct 27, 2011 9:07 AMOne thing that is mentioned, but not really emphasized, is that the zooming when opening and closing Apps is now gone when the reduce motion setting is enabled. I guess too many people where claiming sea sickness and Apple wanted to avoid lawsuits.
Now the nay sayers will have to refocus their efforts and complain about the font and the icons. -
When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show
Maybe you are looking for
-
We recently installed Web Analysis 9.3.1 and have not been able to successfully open it. When we select the Web Analysis URL the initial Web analysis Studio appears with a "session in progress" message. Shortly thereafter a new window opens and it is
-
I don't like to install Plugins without doing some research on them first. http://news.sky.com/home/sky-live-tv wants to install a plugin. Have they been hacked? How do I know what I am installing? Facebook wants to install a plugin after their lates
-
While restoring i am getting error 21 and unable to solve it
Hello Friends, All of a sudden my iphone turned off and when i tried to restart using both power and home buttons it is not popping apple symbol. I tried to restore it using updated itunes still it is generating "Unable to restore error::21"
-
Hi everyone, I have a SSD with the System and Apps on it, and another HDD containing the home directory. I made the mistake to rename the Volume the home directory is on whilst being logged in, the system reacted accordingly and prompted some Passwor
-
Formal error: Invalid calling sequence for function modules
Hi All, I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing. The clearing works fine. After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared