Ok with one image effect but not two ?? explorer problem, firefox is ok...

Hi guys, I've just starting put a site together here:
http://ashling.yorkwebsites.co.uk/jonah/
I'm aiming for a the image effect at the top with imagerotator and a coverflow type effect at the bottom.
I put the coverflow viewer in first and it worked fine on firefox and explorer.
then i added in the image rotator. Both work good in firefox but in explorer I only get the top image rotator, no coverflow lower down. What could be causing this? can anyone please help. thanks.

what about if you install the flash? do both work or can you only see the top one still??

Similar Messages

2nd gen ipod shuffle will charge with one computer (vista) but not the other computer (windows 8). Please help!

My 2nd gen ipod shuffle will charge on my old vitsta computer but not my new windows 8 computer. Does anyone know why that might be? The new computer recognizes the ipod and I can see everything on it, change settings, etc. it just won't charge. Is there a reason as to why this should be happening?

Just bought a refurbished 2nd generation ipod
shuffle. I am running the very latest version of OS X
and iTunes on an iBook G3 600 mhz with the slower USB
ports, not 2.0 ports. The ipod mounts and is
regognized by itunes, but I cannot seem to register
the ipod from itunes, it always has an error message
when I submit to register (all forms are filled out
correctly). The registration window in iTunes shows
that this ipod is formatted for Windows (from the
previous owner I assume) and may be causing my
problems?
No. ALL shuffles are FAT32 format.
The other problem is that it will not sync and
transfer any music from itunes library. I am trying
to transfer simple mp3 files that should be compliant
with the ipod specs. No luck even after multiple
restarts on the ipod. Any help would be appreciated!
Thank you.
Try this: http://docs.info.apple.com/article.html?artnum=305204

Can Vid Chat with one computer login, but not the other--HELP!!!

When I login to my computer using my account, I am unable to video chat. However, when I login using my daughter's login, I can video chat. What gives? As far as I can see the settings are all the same. I can get as far as sending an invitation to video chat with somebody, but then it just churns while waiting for the other person to accept the invitation. In other words, they accept, but the last connection step doesn't happen. It happens when I'm logged in under my daughter's computer login, but not mine. Also, when I get an invitation to video chat, the same thing happens. I accept and then it just sits and churns waiting for that last step. I have a .Mac account and she has an AIM account, but it doesn't help when I switch to my AIM account. Any help would be great. Thanks in advance.

Go to Users/(your account)/Library/Preferences and delete com.apple.ichat.AIM.plist and restart iChat.
10:15 PM Friday; January 11, 2008

Panasonic TV. Apple TV works with one HDMI input but not the other.

I have the latest version of Apple Tv and an older Panasonic TX32LXD60 Tv. The TV has two HDMI inputs. Apple TV works perfectly on HDMI1, but shows nothing on HDMI2. I am using exactly the same cable. HDMI2 works fine with my DVD player. Can anyone explain how I can get HDMI2 to accept Apple TV?

Update - Panasonic support wrote the following:
"Thank you for your e-mail enquiry regarding your Panasonic product.
I have discussed your issue with our head office AV technica ldept & they have confirmed that as the DVD player works on the HDMI input there is nothig wrong with the TV. It may be there is an incompatability with the apple TV interface & the TV. Nothing can be done to solve this as there would be not adjustments you could make to the HDMI inputs on the TV."
so according to them its not their product!
I have solved my problem by getting a Samsung TV - brilliant picture and no technical problems (so far!!)

WebDAV working with one page grop but not with another

Hi,
I have a problem - untill last week WebDAV worked ok (more or less).
now, it works with Shared page group and with a recently added pg, however it does not work anymore with the main page group.
Ay ideas?

Hi John,
what I meant was that initially the main page group would be displayed in a window, but after I try to access (or after a simple refresh) it would dissapear. No problems withh Shared and a new page group though.
BTW, more or less means that a colleague had a problems transfering large amount of data via WebDAV. It left a huge transfer overnight and after taht he porblems started. First, the WebDAV worked occasionaly and then completely died for that particular page group.
I am puzzled here why it works for some and not for the others.
BTW, when I try to map a network drive for http://server/dav_portal/portal/ at different computer now, it would come up wih an error saying "the network path ... could not be found". The path does work when copied into the browser's address bar (however the main page group still unaccessable).
Cheers.

I can sign into iTunes with one user id, but not the other

I am trying to update all apps. I tried to sign in under my main id, and it says it cannot connect. No error code. I tried under my other id and it worked great. What would cause my main id to not work? Any suggestions would be appreciated. I hope it's something easy that my brain just doesn't want to see.

Go to Users/(your account)/Library/Preferences and delete com.apple.ichat.AIM.plist and restart iChat.
10:15 PM Friday; January 11, 2008

Nothing will print. My printer works with every other program, but not this one!

Nothing will print. My printer works with every other program, but not this one!

I see the printer, in blue when I click on the hardware tab. Actually there are 2 things listed that have to do with the printer.
The first one is called:
HP Photosmart Prem C410 series (DOT4PRIN.... and under the Type it is listed as IEEE1284.4...
The next is listed as:
HP Phototsmart Prem C410 series and under the Type heading it says Printers.
I don't know which one to pick. So when I choose the name highlighted in blue, what do I do to change the name?

Images Viewable in Firefox But Not In Explorer, Safari, Chrome.

I have a coldfusion page with images. The images are called up dynamically from my Mysql database. The image field with my database has the datatype "char(100)". All that is stored in that database field is the file path to the folder of which the image is stored which is: \photos\RSL\1.jpg.
On my webpage, the image placeholder looks like this:
<a href="#Unit_Info.comphoto1#"><img src="#Unit_Info.comphoto1#" alt="" name="1" width="98" height="73" /></a>
This images display just fine on Firefox, But Not In Explorer, Safari, & Chrome. These latter three just show a broken image. Could there be something wrong with either my coldfuson or Mysql file path where each of the letter three browsers are trying to access?
I'm running Coldfusion 9 on my local machine, using OS Window 7 Professional.

When I hard coded the file path it worked. I checked the source code and saw no white space. I even went to each browser's options dialog box to make sure that the show image options were checked. It may be my coding. In my image folder there are categories of other folders within folders that have images of which Coldfusion calls up whenever the browser needs it. Could that be the problem? Should I have all of my 300 images in one folder?
- Hannibal Hasan
On Sep 1, 2011, at 9:30 PM, Dan Bracuk <[email protected]> wrote:
First thing I'd try would be to hard code the expected value and see if that works. If it does, I'd look at the html source code from the problematic browsers and see if there is any unexpected white space.
This message was sent to: College Kid
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3897548#3897548
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3897548#3897548. In the Actions box on the right, click the Stop Email Notifications link. For more information about unsubscribing from the Adobe Forums, please visit http://kb2.adobe.com/cps/522/cpsid_52211.html
--end--

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

How to "Save for web" just the layer effect but not the content area?

I fill the area with white, then add outter glow to the layer. Now I want to "Save for web" the outter glow effect but not the white area. I want the white area to be transparent. If I delete the white area, the layer effect goes away, if I merge the layer with another to flatten (think then I can delete the white middle while keeping the layer effect stay), the layer effect look totally different after flatten.

Set the fill to 0% in the layers panel (not the opacity). Then save for web as a PNG24, with transparency checked.

Code is working fine with OIM9102 BP14 patch but not in OIM9102 BP20.

Using OIM API calls, I am able to fetch usr_key and ugp_key succesfully when utilityFactory is initialized with system admin login.
When utilityFactory is intialized with non system admin ID, usr_key and ugp_key is returning as "0".
This code is working fine with OIM9102 BP14 patch but not in OIM9102 BP20. Do user need any access right to invoke API calls ? Any thing related to this is changed in this patch?
Environment details:
OIM 9102BP20
Websphere 6.1

No, no more rights are needed. If it is working fine into BP older than this one, raise a SR and ask support guys to file a bug. But you have to show them step-by-step working into the older one and not working on newer. It is quite difficult happen, but maybe this feature broken on new business patch 20.
I hope this helps,
THiago Leoncio.

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

Hi, mmayers.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting. The second article covers the recommended settings for current Wi-Fi access points.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

Ok with one image effect but not two ?? explorer problem, firefox is ok...

Similar Messages

Maybe you are looking for