Ok with the apology from Tim about apple maps , but...

But if Apple are really serious about their clients they should allow iPhone 4s users to downgrade from IOS 6 (that is if you upgraded, unfortunately I did) back to IOS 5.1.1 which contains Google Maps..
I tried to downgrade, but since Apple stopped signing the ios 5.1.1 firmware , I get an error 3194 and cannot go any further.
For iphone 5 Apple should allow Google Maps in the next release of the firmware or a Google Maps app for free.
This is my 2 cents worth..
Ipnotech

Apple does not monitor these forums and your suggestion is falling on deaf ears as we cannot do anything about this. We are users like you.
Go to the apple feedback page elsewhere on the Apple site.

Similar Messages

  • I plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

    i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

    Try restoring from the backup created at the beginning of the sync process:
    Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
    Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
    Select Restore from backup, choosing your most recent backup to restore from
    Disconnect your phone and confirm that your photos are back
    Go back to iTunes>Preferences>Devices and re-enable automatic syncing.

  • The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

    The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

    Probably a setting. Look at the manual.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • How to make the active save-to-file with the data from GPIB ?

    Hello,,everybody !!
    I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
    Thank you in advance for anybody's help !!

    Thanks Dennis,
    I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
    16:40:33 54.24
    16:40:34 54.23
    16:40:35 54.24
    I want to get rid of the blank line in between.. Do you have the idea about it ?

  • I have itune on my first computer, but i cant download it for my other one,how can i do that, i tryed many time with the link it says you download it but nothing follows  thank you

    I have itune on my first computer, but i cant download it for my other one, how can i do that, i tryed many time with the link it says you download it but nothing follows  thank you

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

    There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

    hey HAbrakian!
    You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
    Mac OS X: How to change the behavior of function keys
    http://support.apple.com/kb/ht3399
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
    Set up steps so inset, update or delete operation takes place across the servers.
    It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
    Also please describe would it be different for SQL Server 2012?
    If so, then what are the steps?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
    Set up steps so that inset, update or delete operation gets done correctly across servers.
    I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
    Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

  • I can't restore 'library' with support files from Time Machine

    backup - I can't restore 'library' with support files from Time Machine - Ask Different
    Due to an accident, my entire applications folder with all the support files, including plists and caches got deleted.
    I tried restoring by files from the most recent Time Machine backups but I cannot retrieve my applications with the support files.
    I even tried it with migration assistant on a new image.
    Is this impossible?
    Must I start from scratch?
    Details of the ‘accident’
    I was using this app called ‘AppCleaner’ that also automatically deletes related support files which are normally left behind if one simply trashes an Application.
    In the search view, I typed the app name and I selected all the apps in the results using Command + A. Unfortunately, this selected every single Application in the Applications Folder in the background and I trashed and deleted all files.
    Anyway.
    I tried to restore the applications and library from my Time Machine Back-ups but failed to do so because I didn’t have enough space to restore. (I have a 11inch Macbook Air 2012 64GB SSD
    When I tried to restart in recovery mode, I had the same problem, I was disallowed the option to restore using my time capsule backups because my SSD didn’t have enough space for the backup.
    I then tried to restore it to a totally different but new image on a 64GB USB3.0 Sandisk USB Stick, but the process stopped after hours of being stuck around 30.4 percent and the computer was unable to boot, leaving me with a persistent verbose message suggesting it couldn’t identify the os, kernel or anything.
    I finally tried restoring the state using migration assistant on the very same SSD that had my files missing. This happened successfully and I have all my applications in the applications folder.
    But now I have 13GB free (I had 2GB before) and all my application support files, saved states, preferences, caches and customizations are gone.
    Basically, it feels like I just got a new macbook with my documents and itunes folder loaded on to it.
    How can I get my apps back to the pre-deletion state or is this impossible? Do I have to start from scratch? I thought my Time Machine Backups would restore it to exactly the same state, am I wrong?
    Screenshots:
    Message was edited by: Arsenenger

    Can you simply navigate to your Time Machine backup with the Finder? Treat it like an external hardrive and just look for your old Applications folder. /Applications/
    Also, quite a few apps put config and support files in ~/Library/Application\ Support/
    So you may be able to get the files from there as well.

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

    i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
    i have told them nuumerous times that for better understanding i have made a video of it but no response..
    really disspointed with your customer support.
    i have uploaded them in google docs..links below.. t
    he first one happened on 30th of april 2014   https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
    the second happened today. i called customer care but no satisfactory respose either.  https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
    who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
    its still under warrenty. please help.

    Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
    If you cannot take it person contact them to determine how to send them your phone.
    You can't expect them to replace your iPhone without first examining it.

  • TS2446 Please help me,I can not purchase from apple store becuse it is ask me the secirty question in my apple ID but I forget my secrity question

    Hello,
    Please help me,I can not purchase from apple store becuse it is ask me about the secirty question in my apple ID but I forget my secrity question.
    Thanks,

    If you can't remember them then go to Express Lane  and select 'iTunes' from the list of 'products' in the middle of the screen.
    Then select 'iTunes Store', and on the next screen select 'Account Management'
    Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
    You should get an email reply within about 24 to 48 hours (and check your Spam folder as well as your Inbox). A month or two ago Apple had temporarily suspended the reseting of security question/answers whilst account security processes were improved, but that may now have finished.

  • I cannot read, use my iPad outdoors?  Cannot read books, surf the net; nothing.  Apple sold me a screen guard to helpmwith the glare, 've adjusted the settings to just about every combination but still nothing.  HELP!!

    I cannot read, use my iPad outdoors?  Cannot read books, surf the net; nothing.  Apple sold me a screen guard to help with the glare, I've adjusted the settings to just about every combination but still nothing.  HELP!!

    Turning the brightness up as much as possible will help a little. However, as Skydiver notes, screens like those used in tablets and cell phones don't work well in bright sun. That's why I have a Kindle for reading outside. Not to mention, I'd feel a lot less awful if I got sand in a $100 ereader than if I got it in my $700 iPad.

  • MY system folder, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac) How do I remove them

    I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac).  For the most part the dupes are an exact copy, but not always.  I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas

    pacull,
    Use iCal>View>Show Notifications to choose what to do with the notification.

  • Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    When a new album is created it will fill with whatever is in the right hand window,  If you're in the Events or Photos mode it will contain all photos in the library.  Yes, strange behavior.
    OT

  • Can I sync the songs from two different Apple IDs (HK and JP) into one iPhone?

    I want to buy some songs from a HK Apple ID and a JP Apple ID.
    I just hope the songs of two Apple ID can appear in one iPhone.
    But I don't want can I sync the songs from two different Apple IDs (HK and JP) into one iPhone.

    Are you currently in Japan or Hong Kong ? You have to be in a country (and have a billing address in that country on your account) to buy or download from its store, that is included in the store's terms.
    You can sync content from different accounts from your computer's iTunes library.

Maybe you are looking for

  • How can I icrease the view size of a web page so that it is easier to read

    I have a problem reading small print on a web page. I would like to increase the viewing sizeto a larger per centage (150% vice !00%)

  • How to use logon ticket in case of different user id with SAP R3

    Hi. I try to login from EP to SAP R/3 using Logon Ticket but My problem is that EP, R/3 user id is different. Is there any method to login SAP R/3 using Logon Ticket in case of different user ID ? Regards, Arnold.

  • Solution Manager: Work Centers setup and config

    My question is in finding helpful documents getting it all setup and on how to configure it. Looking for something that gets into each available section, not just tell me that they are available. I have checked out: Work Centers in SAP Solution Manag

  • Error message: "conflicts with a path already in use"

    I am trying to establish through Contribute version 2's Connection Wizard a new connection to www.charlesfigley.com. After I enter this web address and hit "next >" I receive the following: Network paths can't overlap The network path you have entere

  • Mailhost

    I'm installing JES2005Q4 on Solaris 10 (I know it's old) It's on a host in a subdomain like: host.foo.bar.xxx.com This is only a test machine with no MX, only an A to host.foo.bar.xxx.com I want email to go to [email protected] Not [email protected]