Okay before my ipod power and volume buttons werent working but i never dropped it, then one day i was in a app and my ipod froze so i held the home button down and the screen went a bright green color and isnt showing up in itunes

okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • I had itunes working properly for a long time till one day, it was configuring to open the program then i get a message out of nowhere that says could not acess network location %APPDATA%\  i cant even uninstall without this, whats the big deal?!

    I had itunes working properly for a long time till one day, it was configuring to open the program then i get a message out of nowhere that says could not acess network location %APPDATA%\  i cant even uninstall without this, whats the big deal?!

    With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
    You receive an "Error 1606" error message when you try to install or remove a Microsoft program

  • I upgraded recently, had the "go back" arrow and favorites/bookmarks-then one day it was gone! I did have the firefox button to get to my bookmarks, but now that is gone too! I am not liking this but hate to go back to using Explorer-what is going on?

    All of these changes were within the last week.

    If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
    * If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
    * If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
    See also:
    * http://kb.mozillazine.org/Toolbar_customization

  • My screen went completly yellow green color took forever to get it to power back on do i need to take the phone back and get a new one?

    Does any know why the screen turned completley yellow when my battery died??? I just got the phone today and wanna know do I need to return the phone I fixed it after I youtubed how to fix it! Will this keep happening??

    Just get it exchanged.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My screen continually freezes up.  I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

    MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

    Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
    Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
    You can read about restoring the software here.
    iTunes: Restoring iOS software - Support - Apple
    Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
    If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
    You should read this first before you restore from either backup.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    This is a must read before you erase the iPad should you decide to go that route.
    iOS: Understanding 'Erase All Content and Settings' - Support - Apple

  • How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

    How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

    David ..
    Your topic refers to an iPod touch
    Then you say:  How does one get an iPod nano to turn on ......
    If it's an iPod touch, try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, whether it's an iPod nano or touch, it probably needs service >  Apple - Support - Service Answer Center

  • My ipod is not working at all i tried to power down and tried the home button i was on pinger and it just froze nothing works on it what do i do?

    my ipod is frozen nothing works i tried to restart it by pressing down the home button and power button at the same time but nothing works i was trying to get on my pinger app and it froze there all i see is the pinger sign its basically my life and i dont know what to do at this point any ideas on how i could get it going again?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iPad 4 is stuck on the connect to iTunes screen.  Have held the home button down while connecting the USB cable to the iPad and its not doing anything, not even showing up under my computer Please Help

    IiPad is stuck in the iTunes connect screen.  I have held the home button down while plugging the iPad in and still nothing.  Hard reset isn't even doing anything.  It's not even showing up under my computer.  Please Help

    Did you get a message that the iPad is disabled?
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipod screen has a white screen i have tried plugging it in to itunes and pressing the home button and top button together but it wont turn on! this has happened before, i should have never bought one what should i do?

    my ipod screen has went white i have tried plugging it into itunes and pressing the home button and top button together for 10 seconds but it wont work!! this has happened twice before already and i havent even had it a year yet, i should have listened to my sister and never have bought one!!! someone help please ?

    - Connect to computer and it it shows in iTune restore via iTunes
    - Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore.

  • My daughter help down the home button and the screen is now glowing, how do i tuen it back to normal?

    help me,daughter held down home button aqnd my screen is glowing, kida, where the back ground was black it is now white.  its kinda like a backlight or something. how do i put it back to normal?

    If the screen colours look like they've turned negative then try triple-clicking the home button - or go into Settings > General > Accessibility and turn White on Black 'off' (and check/change what Triple-Click Home on the same Restrictions screen is set to).

  • HT4061 ????  How do I power up my iPad?  My iPad won't power up. It just stays a black screen.  Tried the start up button, the home button, pressing them down and holding.

    ????  How do I power up my iPad?  My iPad won't power up. It just stays a black screen.  Tried the start up button, the home button, pressing them down and holding.

    Could be the battery is completely drained. Use the charger that came with the iPad and plug that into a known good wall outlet. Let it charge for at least an hour. Then, while it is still plugged in reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    If the device restarts let it remain on the charger until the battery indicates 100%. If it still will not turn on Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My ipad is password protected and i can't remember the password.  when I try to restore it, the itunes restore plugin screen will not appear on my ipad.  I have tried to shut down, plug in, and hold down the home button method and get nothing.

    my ipad is password protected and i can't remember the password.  when I try to restore it, the itunes restore plugin screen will not appear on my ipad.  I have tried to shut down, plug in, and hold down the home button method and only get the password screen again on the iPad.  Any suggestions??

    tried all that and was looking good with new software etc downloaded and then got a message in iTunes."we're sorry we are unable to conitue with your activation at this time etc " tried process again and got to the same message. iPAD still has the connect to it tunes screen ..any suggestions?

  • I have a white iPhone 4 16gb and the home button doesn't sit flush with my screen, it feels like it has sunk down a little. Warranty expires June 2012 so it is under warranty, Would i be illegible for a replacement? Thanks

    I have a white iPhone 4 16gb and the home button doesn't sit flush with my screen, it feels like it has sunk down a little. Warranty expires June 2012 so it is under warranty, Would i be illegible for a replacement? Thanks

    No way really for anyone here to give you an answer to that question.  You would need to either send it to Apple for evaluation, or take it into the genius bar at a nearby Apple Store and ask them about it.  Only an Apple employee could make the call, and they would need to see and handle it to decide.

  • My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

    My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

    Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
    Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

  • I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring?

    I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring? It brings me to a website saying the steps to possibly fix it but I don't find them helpful

    http://support.apple.com/kb/TS1275

Maybe you are looking for

  • [SOLVED]xorg-server 1.14.4-1 - mouse wheel not responding while moving

    I notice a relapse of the bug (https://bugs.archlinux.org/task/29191 and https://bugs.freedesktop.org/show_bug.cgi?id=48167) since the xorg-server upgrade. Downgrade to 1.14.3-2 solves the problem. The problem is noticed in ioQuake3 engines. UPDATE:

  • Selecting language in Trial Version of CS 5.5 Master Collection.

    A quick question, I recently decided to give CS 5.5 a try, by downloading the Trial Version of CS 5.5 Master Collection. However for some reason I cannot select the English language (I do have 5 or 6 other options, but not English). I already tried c

  • Where I save Executor instance in MDB environment

    Hi, I've been doing some experiences with JMS and Message Driven Beans. I put in a queue messages and see how many MDB beans catch and treat the message. I've concluded that Glassfish creates many MDB beans and some are removed. My goal is control th

  • Folder size and library size don't match?

    I have my iTunes music library located on an external hard drive and when I do the "get info" tool on it it shows up being 43 gigs. However, when I'm using iTunes it says that my total music library is 19 gigs, my videos are only 383 mb, and my podca

  • HP Photosmart

    I have an older HP Photosmart Camera ( M627 )  It is around 7 years old and compatable with Windows XP. I have Windows 7 and I am unable to view video taken with camera.  I do have audio, but only a black square when trying to view as a video. I am a