Okay, better explained here. If anybody can solve this you would be amazing, please.

gopro hero 3 black + premiere pro cs6...
I shoot at 720p 120fps.
Premiere doesn't want to read that as 120fps, it wants to read it at 60.
Video is slow while the audio remains okay but cuts off far too early.
I can go into modify the clip to make it read as 120fps but then my audio is super fast.
Tried unlinking audio and video beforehand but it still applies when the clip is dropped to the timeline.
I used cineform to convert my files but it ends up turning 300mb into 1.5gb...
I think I may need to figure a h.264 codec within premiere because that is what gopro writes with I think?
How can I fix this issue this is getting to be obnoxious...

hello, here is another thread with similar issue and the op seems to have it kinda working
http://forums.adobe.com/thread/1141054
post 14
re: the chipmunk audio, i think in the speed rate setting there is a check box to preserve audio pitch (i'm not sure exactly)
the time remapping feature might work because it does not affect the audio
here is a creative cow forum thread where the op says it works (perhaps you could post there and get him to give advice)
http://forums.creativecow.net/thread/3/935431
the more information you provide the more users can help you
here is another thread re: gopro3
http://forums.adobe.com/thread/1116162
here is a link to converting files if you have a mac
http://www.brorsoft.com/how-to/import-gopro-hero3-1080-60p-mp4-to-premiere-pro-cs6.html
here is one from the gopro forum
http://goprouser.freeforums.org/wvga-120-fps-adobe-premiere-settings-t8315.html

Similar Messages

Hi my iphone 4 is disabled how can solve this problem? help me please

hi my iphone 4 is disabled how can solve this problem? help me please

What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

If anybody can solve this, they win.

I have a 15gb third generation (3g) ipod. Bought in April 2003, fully functional until about april 2006, at which point it stopped turning on all together.
My thought? I made a homemade battery-pack out of an altoids tin, some batteries, and some soldering. It worked really well, providing the right amount of electricity and supplying juice for a good 8 hours---but I thought it may have fried the battery.
So one day, my ipod stopped working. It wouldn't turn on, nothing. I gave up trying to revive it, and stuffed it away for a few months.
But then, last week, I plugged it into my computer and it magically worked--not correctly, but it worked. I managed to download the updater and update the firmware--but then the ipod would only display the apple icon followed by the "connect to charge" icon before turning off.
At the time, I had no idea what was wrong. So I plugged it into the computer, I reset it a thousand times, I went into diagnostic mode, I even opened it up and unplugged and replugged the battery. No dice.
Later I found out here that a firmware update on a 3g must be completed by plugging the ipod into the AC charger. So I got mine back from my friend and did that, still no dice. Even left it charging for a good day and still nothing. Even bought a replacement battery (mine is getting old and unreliable anyway) and still no dice.
Here's what I think happened: somewhere between unplugging the battery and resetting a million times, I disrupted the ipod's ability to finish the firmware update. So I'm unable to access anything--including diskmode--because the ipod simply won't run any firmware at all.
So I'm stuck. Diagnostic mode tells me that everything is a go, but nothing is going anywhere. I'm unable even to get the ipod recognized by a computer in order to format it through windows---at best I can get a bubble to pop up on the computer saying "Device failure"
If you could offer any help it would be greatly appreciated. Thanks for taking the time
--David.
Windows XP Pro
Windows XP Pro

Hi
First, try this
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
If does not work
Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

If you can solve this you're a GENIUS!!!

Okay so Im burning a warmup cd for my team and I have cut all the songs according to the parts of the song I want.( I learned this from a previous post I had). However when I burn the cd it takes the song that is in the 7th postition and adds silent time to it. It doesnt matter what song it is. For example the one now, I cut it for 2 minutes and the original song is 4:38. Before I burn the cd the song says 2 minutes and then after I burn the cd it says 4:38 and when it plays off the cd it plays for two minutes and then goes silent for 2:38. Ive tried everything please help!!!

Go to iTunes > Preferences > Advanced > Importing and set the encoder to WAV (automatic settings). Then select the files in question from your iTunes library or playlist and use the Advanced > Convert Selection to WAV menu to convert the files to WAV format. Make sure "Kind" is enabled in your view options (Edit > View Options) so you can easily identify which songs are the WAVs and which are the original MP3s.
You can now select the WAVs and use the File > New Playlist from Selection menu to create a playlist to burn to CD. First, make sure to go to iTunes > Preferences > Advanced > Burning and set the disc format to audio CD.
When you're done with all of this, remember to go back and change your importing preferences to whatever you like to use, as WAV probably isn't what you want for general use.

My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?

My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?

Please explain.
What does "cellcom line doesn't work with my iPhone" mean?
What are you trying? What is happening?
Where did you buy the iphone?
Any info abnout your issue at all?

I guess the problem come from me or I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?

I guess the problem come from me but I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?
One more thing. I just update my iphone that my boss gave to me but it seems to be like it giving me some trouble. My iphone was updated not too long and was successful. I try to lock into it and it telling me emergency call. I plug it to my itune and it telling me that the sim card is not valid or supported. So I inserted my sim card that I usually use to call and it still saying the same. Please help me get into it.

And as far as paying for phone support, here are a few tips:
If you call your carrier first and then they route you to Apple, you usually don't have to pay for phone support.
If you are talking to Apple and they ask you to pay a support fee, ask if you can get an exception this time. That usually works once, but they keep track of the times you've been granted such an exception.
If you still end up paying the support fee, that fee only applies if it's not a hardware related issue. In other words, if it can be fixed by just talking over the phone and following Apple's instructions, then the fee applies. But if your device is deemed to have a hardware failure that caused the issue, then the fee should not apply, and you can ask for it to be waived after the fact.
This forum is free, and almost all of the technical support articles the Apple tech advisors use are available on this website. Literally 99% of what they can do over the phone is just walking you through the publicly available support articles. In other words, you're paying the fee to have them do your research for you. It's like hiring a research consultant to go look stuff up in the public library so you don't have to. You're capable of doing it; you'd just rather pay someone to do it for you.
It's like Starbucks. You know how to make coffee. Everyone knows how to make coffee. And Starbucks coffee isn't any better than what you could make at home for far less. But you want the convenience. So you're really paying a convenience fee. Milk is more expensive at 7-Eleven than it is at the grocery store... because it's a convenience store.

I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?

Since upgrading to version 10.8.2 my MacBook Pro won't wake from sleep is her anyway I can fix this?

Since upgrading to version 10.8.2 my MacBook Pro (late 2009) won't wake from sleep is her anyway I can fix this?

> during the entirety of this process the cursor was a "busy" pinwheel/beach ball/whathaveyou for a solid 30 minutes before I turned the computer off with the power button.
All that cursor means is that it is busy trying to do something. You can see if force quitting solves the problem with a simple force quit using command-option-escape. If you are having issues with iCal quitting, sometimes it doesn't always know whether or not it is properly communicating with a particular calendar. This can be a Mobileme issue, or even a phone synchronization issue, or a network issue reaching a shared calendar. Shutting down a machine directly from a cursor is the last step one should try, only after all others have failed. If you have done this in the past, lurking corruption can get worse each time with the directory, and upgrading the system will only enhance any corruption already present. When you restart your Mac, does everything appear to be normal?

What is this error and how i can solve this?

I got this error in my alertlog.
ORA-000060: Deadlock detected. More info in file D:\oracle\admin\TEMPDB\udump\ORA06816.TRC.
why this error occur and how i can solve this.

Hi,
Here is the cause and action information about ORA-000060 error
Cause: Your session and another session are waiting for a resource locked by the other. This condition is known as a deadlock. To resolve the deadlock, one or more statements were rolled back for the other session to continue work.
Action: Either:
Enter a ROLLBACK statement and re-execute all statements since the last commit or
Wait until the lock is released, possibly a few minutes, and then re-execute the rolled back statements.
For more information on any error code refer to the Oracle Error Messages Documentation.
Hope this helps.
Sujatha.

How I can solve this problem or manipulate it ports 80,443 are closed by ISP and they don't want to open it

hi,
I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open any of it 80,443 ect.
suppose If I want to use Essential server 2012 how I can solve this problem , essential wants domain name whith A record.
I asked DDNS service provider if I lease from them a domain name whith A record would that help to open or manipulate the port 80,443 they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.
so what can be a solution the ISP provider won't open this ports , how I can solve this problem . domain name with ip adres is not helping so what it's go to help?
thanks
johan
h.david

The domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Hello apple guys, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac". I really, really miss Steve Jobs!

To connect my ipod to itunes with windows 8 not see the option to add to add songs from itunes library. As I can solve this?

To connect my ipod to itunes with windows 8 not see the option to add to add songs from itunes library. As I can solve this?

Since you can only sync your iPod with one computer at a time, you'll need to copy the contents currently on your iPod to your new iTunes library first. See this older post from another forum member Zevoneer covering the different ways to accomplish this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Okay, better explained here. If anybody can solve this you would be amazing, please.

Similar Messages

Maybe you are looking for