Okay, I have read some of the issues here
Okay, I have read some of the issues here and I am scratching my head. I have my PC hard wired to a Linksys WRT G router and my Mac is connected wirelessly to it just fine. Now, my computers don't seem to see each other on the network. Pretend I am a a complete novice and step me through telling me how to network to share the CD files, documents and pics that I have on my PC with my MAC.
I have the sharing enabled on both the MAC and the PC and I had this working at one point but something went haywire and all was lost. I have since reset my router and re-established the wireless connection between the PC and MAC.
When I click on the Finder and click on Network, my PC is no longer in there like it was before.
Any help would be appreciated.
Thank,
Dave
I'm just getting setup myself. Is your mac sensing the wireless network? And if so can you surf and check your email on the mac wirelessly?
Similar Messages
-
I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.
Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).
-
I was trying to install OS X Mountain Lion 10.8... and I got an error saying, "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. I saw several other questions below of people having the same or similar problems. Does this mean that my hard drive is about to crash? I plan to head to the place I purchased and have it checked out. I backed up my data a couple of days ago. Any comments?
Yes, S.M.A.R.T. is a built-in diagnostic on the hard drive, and it is reporting a problem that may cause it to fail.
You can see the same status in Disk Utility, and possibly get more info. Run Disk Utility and select the DRIVE in the sidebar. Be sure to select the DRIVE and not the volume indented below it. At the bottom of the window, there is a field for S.M.A.R.T. Status. If there is no problem, it should say Verified.
You can also do a Get Info on the drive (File -> Get Info) in Disk Utility, and the Info window provides more detailed information (toward the bottom) about what is being checked. -
i have read all of the numerous and similar issues on this subject. and i still cannot connect my new airport extreme. my old airport express works fine still. help. and why are there so many issues with connecting this stuff? i thought this stuff was supposed to be getting easier, not harder... thanks.
Sorry, but I have no idea on what you have read and tried so far so please forgive me for any redundancy.
Is your AirPort Extreme the only router in your current network configuration? Which exact model is it? If there are other routers being used, please provide their make(s) & model(s). Also the make & model of your Internet modem.
What is your goal with the Extreme? Is it to replace the "old" AirPort Express? Will you still be using the Express for any reason(s)? -
Hi guys, I do need your help to answer this question please. I wonder that which industry and sector does Apple belong to? I have read some news on the Internet but there haven't provided with specific source. So could you help me to answer this question please? Thank you very much <3
Welcome to the Support Communities. Apple Inc. (AAPL) is listed on the NASDAQ exchange where it is categorized as follows:
Industry: Technology
Subsector: Computer Manufacturing
(Source)
More info from Apple can be found here:
http://investor.apple.com -
Unable to open document. Please check to see if you have read permission for the above file.
System:
Adobe Acrobat X Pro, 10.1.2
Windows 7 Enterprise, 32-bit
Quad Core badass CPU
4GB RAM
MS Word 2010 (Office 2010)
I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
"Unable to open document:"
"[document location]"
"Please check to see if you have read permission for the above file."
This happens after the little notice pops up "Starting the application which created the document...."
If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
"I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
I have updated to the latest version 10.1.2 and still have this problem.
This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
If anyone has found the solution, please post it here.
Thanks!
BI think I found a solution. It seems to be relatet to normal.dotm.
In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
(By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested. -
It says I've got 12,3 GB free space left, of my total 25GB. But my iPhone tells me there is no more space to take pictures or download stuff. It clearly says I have 12,3 GB left. What's the issue here??
The issue is probably space on the phone, not in your iCloud account. (Space in your iCloud account does not give you more space on your phone.) Check Settings>General>Usage at the top to see how much available space you have. If it's low, you'll have to delete or sync something off our phone to make room for more.
-
TS4036 I think i have lost some of the notes i have made
I think i have lost some of the notes i have made, Is it possible to recover?
If you have icloud backups turned on as well as Notes (settings>icloud), then they may be in a recent backup. The only way to get them is to perform a restore of the entire backup, which overwrites your entire device.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup. -
Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??
Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??
-
I have read all of the discussions about headset echos, my echos are heard by the caller when I hold the phone by the bottom half. The echo disappears when I change my hold position. Anybody else having this problem? Fix?
Don't hold it like that. You're creating an 'echo chamber' due to the position of your hand/neck/face. It's not a technical issue. I hear this when I talk to my wife and she cradles the phone against her shoulder.
-
I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?
I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged.... -
Hello,
I am not able to sign off from the mac,when I try the mac says my mail program will not allow it,when I try to sign out of mail,I am not able to highlight and click (quit mail.) I have read and watched the mail video's but have not fixed it. If possible could someone who has had this issue share the solution they came up with to address the problem with me please? Thank you.press command-option-esc keys and force quit out of Mail.
-
I have a friend that has the IPhone and I have Straight Talk, what the issue is,when I send picture texts from my ST phone to his IPhone,he always tells me he doesn't receive them.Why is this happening?
You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.
-
Hi
Can anyone tell me how to obtain a still image from iMovie 11 version 9.04. I have read some forums but cannot find the solution. I have also read the Apple help pages but the instruction does not fit the options available. I need to get a few stills from a movie to add the stills to the website. PLease any help?Thank you Neil,I have a macbook pro with snow leopard v.10.6.8.included intell core 2 duo with a processor speed 2.5ghb with one processor and cores 2.
can i download onto my laptop an update by internet to my imovie 8.0.6 directly or as i have read, the system will not let me do that unless i have imovie 9.0.0 already which i do not have.
Perhaps i misunderstand you. Do you mean purchase a software copy from an apple Store and the can i directly upgrade. -
I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.
Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
Cheers, Tom
Maybe you are looking for
-
Carrying and Forwarding agent mapping
Dear All, I have to map a certain scenario where there are two plants at two different states and one ware house and 20 C& F agents spread across the country. 1)How should i map this in SAP? 2) Whether i should map the C& F agents as S.Loc or any thi
-
Web DynPro ABAP - Disable a entire row in the Table of the output.
Hi Web Dynpro Experts, Need ur Help.! I have a requirement to disable the one row of the table in web dynpro ABAP For example . my table is like Field1 Field2 A Success B Failure C Failure I need to allow the User to
-
Hello I'm a newbie and i have to make a procedure that can return a set of records , in Transact SQL I make using temporal tables , is possible to do the same in Oracle ? Thanks
-
Purchase Requistion - delivery date
hi there is a sub DC where replenishment takes place from a bigger DC only when safety stock goes down. now when the safety stock goes down say today, MRP generates PR which has delivery date as today and with a release date in past based on planned
-
Premiere CS5 Crashing every 5 to 7 minutes on Mac Pro
Hi Forum, I know it's been asked by many people before, but the situation described by other editors for some reason seems a little different than in their cases, so I need to ask my own question. I work with video/audio files recorded using Canon 5D