Okay to have Ethernet and Wi-Fi running at the same time ?

Hi,
I've always been careful to turn off Airport before I switch to Ethernet.
I was just wondering if it is okay to have both options running at the same ime and what consequences it may have.
Thank you for reading this

Coitus Interruptus wrote:
+"Will the Mac use part of both simultaneously?"+the Internet and E-Mail.
Hi,
every IP based connection has a gateway that tells a device where to send packages that belong to the subnet the connection is in.
Then there is a (one, and only one!) default gateway that tells the device where to send all packages that belong to no subnet of any connection. On OSX this is normally bound to the primary network device (the one that is on first place in the network configuration).
So there is no problem having more than one network connection open. In your case, though, the WiFi connection would probably be in the same subnet as the wired connection. This doesn't pose a problem per se, but just is a bit senseless. It doesn't have an impact on networking, though.
My sister suggested it. She knows Latin. It means "handsome boy", doesn't it ?
In what reality?
C.

Similar Messages

Can a vodcast and a photocast run at the same time ?.

Hi,
I would like have a video podcast play and a photocast run at the same time is this feasible?
Geoff

Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
-S

Can you have Firefox and IE browsers both at the same time and if so, do you have the choice of choosing one for a default browser?

I am using IE Explorer now presently. I want to be able to download and install the SEO Blogger tool from Wordtracker but it says that I have to have Firefox as the browser. Since I have everything else already set up under IE, I don't want to have to change all that just so I can download one program.
Can you help?
Thanks,
David Craig

You can have both browsers installed and running at the same time. You can also choose what one to have as the default browser.

Video out settings HDMI and Component out run at the same time?

Does anyone know if I can get video out of both the HDMI port and component video connections at the same time. Trying to distribute video throught the house on component, and still get HD on the flat panel in the living room. Any help would be greatly appreciated.

Apple says when both HDMI and component are connected, HDMI will take precedence over component. Short answer: no.

Can B1 2005 and 2007 be run at the same time?

I want to install B1 2007 on my server to make sure that everything runs over smoothly, then when I'm satisfied with the results, I'll just upgrade my workstations and hopefully have a seamless transition. Are there any errors that will pop up if I install 2007 at the same time as 2005? I have to make sure that there isn't a work outage.

Derek,
if you mean both version to sql server, the answer is yes, you can. If you mean to install the aplication, the answer is no, you cannot. If you want to test new version, youll have to use new computer or some virtual PC.
Petr

Forms 6i and Forms 9i Running at the same time

I was wondering if it is possible to run the Forms 6i developer suite and the Forms 9i developers suite at the same time and database environment.

Oracle9iAS Release 2 = Oracle9i Forms and you can only run 9i Forms in this stack.
Oracle9iAS Release 1 - Oracle Forms6i and you can only run 6i Forms on this stack.
You should "mix and match" version of Forms. You should run the version of Forms on the same platform version.
Of course, you can upgrade your 6i Forms to 9i which means they will now only run on Oracle9iAS Release 2.
I know its a little bit confusing but we are slowly getting all our release numbers aligned to make it easier for you.
Regards
Grant Ronald
Forms Product Management

Can PSE 6 and PSE 8 Run at the Same Time?

I have Windows 7 and recently upgraded to PSE 8 and have had problems with Photo Mail and email attachments. I did not have email attachment problems with PSE 6 so I wonder if I can run both 6 and 8. Will there be a catalog problem? When I loaded PSE 8 the first time the catalog needed to be converted. Will this make it unstable for PSE 6?

As requested.

Mainstage 2 and Kontakt 5 running at the same time?

I use MainStage 2 and Lion running on my MacBook Pro 2.3 i5 8GB Ram. When I use only Kontakt 5 latency is low, but when I in addition start up MainStage 2 I get pops and crackles. Can not Kontakt 5 and Mainstage 2 run side by side? Is this normal?

I just think its kinda funny, since I use MainStage ONLY for changing patches on my three synths - no softsynth at all, and use Kontakt 5 mostly for playing one Rhodes sound, sometimes I layer two sounds at once. The CPU is not very high, just seem like Kontakt and MainStage will not work well together. Mayby using a SSD for the samples would help ...
(Sorry. By mistake I pressed the "Correct answer" on my reply )
Message was edited by: HowardPain

Using Adobe 11 reader, now comes up with an error, once file is opened. 'Invalid plugin detected, Adobe reader will quit. Closes the program so cannot view PDF files. Running windows 7. I have uninstalled and re-installed Adobe still the same. HELP

Using Adobe 11 reader, now comes up with an error, once file is opened. 'Invalid plugin detected, Adobe reader will quit. Closes the program so cannot view PDF files. Running windows 7. I have uninstalled and re-installed Adobe still the same. HELP

Sounds like something has been added into the Reader folder. I would recommend uninstalling, running http://labs.adobe.com/downloads/acrobatcleaner.html, removing any left over parts of the Reader folder (this might have been the problem), reboot, and reinstall. Hopefully that solves the problem. For future question about Reader, you should consider asking in the Reader forum, this is not it.

I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

Well this is not a problem I have already bought one, my great worry is the processor and the memory..

Labview runs CANBus and DNP3 software model at the same time

I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
I proposed two possible ways to conduct communication, bt not sure if it is possible.
1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
The diagram of the communication system is shown in the attachments.
Attachments:
Commnucation system diagram.pdf ‏118 KB

To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
¿Do you see a trend developing here?

Dreamweaver and Fireworks won't run at the same time

Recently, I've run into a problem where I cannot run Dreamweaver and Fireworks at the same time.
I have Dreamweaver CS4 & Fireworks CS4, which I can still run at the same time.
However when I run Dreamweaver CS5.5 and try to launch Fireworks CS5.1 I get a C++ Runtime error in FW CS5.1.
And when I run Dreamweaver CS6 and try to launch Fireworks CS6, Fireworks CS6 freezes before fully loading.
If I run DW CS6 and launch FW CS4, I can get them both to run together, but when I close FW4, DW CS6 crashes.
Any suggestions would most appreciated.
David

Historically, I've always kept prior versions installed because sometimes, albeit infrequently, I need to access extensions that aren't compatible with the newer versions of CS. Since I can run DW & Fireworks CS4 together, I'm inclined to leave them installed.
I've thought about uninstalling CS 5, but I don't think that would resolved my issue. I've already tried most of what's in the Adobe troubleshooting suggestions save for creating a new administrator account.
I think I'll hobble along with my current workarounds since I'll be migrating to a new computer very soon, which should acomplish what creating a new administrator account would. I'll probably limit the reinstall to CS 6 to eliminate any issues that might be related to having multiple versions installed, which in reality shouldn't be an issue because again, I've always done that successfully in the past.
Thanks for the suggestion just the same.

Is it possible to have 2 threads running at the same time?

Is it possible to have 2 threads running at the same time at different times eg 1 repeats every 20 miliseconds and the other 40 for example. Also could you have 2 run() methods in one script, in one file? If so how? Help soon would be appreciated. Thanks.

Is it possible to have 2 threads running at the same
time at different times eg 1 repeats every 20
miliseconds and the other 40 for example. Yes.
http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

Thanks for digging out the facts.
You have a 1st Generation Time Capsule.
Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

Can you run 3G and connect to wifi at the same time?

Is it possible to use the iPhone 5 to search 3G and connect to wifi at the same time? I'm trying to run my Apple TV but only have 3G that is run through my phone. I want to play Netflix using Apple TV run from 3G through my phone.

The phone and the ATV need to be on the same wireless network. You cannot communicate with the ATV using 3G on the phone

Okay to have Ethernet and Wi-Fi running at the same time ?

Similar Messages

Maybe you are looking for