OKB9 setting for F110
Hi,
When we do discount posting system asking default cost center centre. So we defined same in the OKB9 but but if we do payment through F110 it is not asking for cost centre. But when we do pmnt manually it is asking cost centre.
Is there some other config for manual payment?
Regards,
Devesh
devesh chaudhari wrote:
But when we do pmnt manually it is asking cost centre.
Is there some other config for manual payment?
What is the transaction code you are using for manual payment ?
Similar Messages
-
Hi All,
I need to understand the basic steps required to generate PEXR2002 IDocs from the payment run (transaction F110)?
I'm quite confused about how to setup the bank partner and assocated EDI config to generate these IDocs and link them to the payment run program.
Thanks for you help.
- Suresh1. Coincidentally I am also working on the setup for F110 IDoc.
Basically I want the breif steps for set up of IDoc process for check payments.
2. Please also confirm whether message type is REMADV and IDoc type is PEXR2002 for check payments.
Kindly help me.
Thanks & regards,
Suraj -
hi guys,
pls suggest okb9 setting step by step.
thanks
rohitHi Rohit,
TC: OKB9 is used for defaulted automate CO account assignement for gl accounts. There is no std. configuration for OKB9, just go to transaction OKB9>select new entries>give co code>cost element>cost center or internal order.
Here profit center is not an imporatant field anyhow profit center is picked from the material master so you can ignore profit center field here.
Thans
Para -
Using a Variable in SSIS - Error - "Command text was not set for the command object.".
Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
</Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCPWhat happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari -
Hi ,
We are planing to upgrade our 10g R2 CRS to 11g R2 CRS on HP-UX server ,while running cluvfy tool we are getting the below error.Please help me to fix this issue.
Checking settings of device file "/dev/async"
Node Name Available Comment
erpdev04 yes failed (incorrect setting for minor number.)
erpdev03 yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
oracle.oracle.erpdev03.fwprod_app1> (/app/oracle/oracle_source/patches/bin)# /sbin/mknod /dev/async c 101 0x104
-
Where did all the setting for printing go in PSE8-Mac?!
OK, I'm probably missing some obvious settings somewhere, please tell me after you read my rantings...
I'm using the 'Full Edit' mode, assuming that is important. But the new Print Dialog looks like it has been dumbed down for some one, not sure who, however has it has me completely confused. There are now only three 'steps' for printing. One and two are self explanatory. However...
Step three concerns paper size, image size and several other details. Just for testing, I created a new 4 x 6 inch, 300dpi page and drew some lines. Command-P. Proper printer is selected, select "Letter" as the paper size. 4 x 6 inch appears selected as the "Print size" (I thought that was because of the original page size, but it appears to simply be the default). That is a detail that could easily be over looked by a new user. If the original image is larger than 4 x 6, it will, obviously be either cropped or reduced to fit those dimensions! It seems to me that the "Select Print Size" should automatically assume to be the image size. OTOH, I can see that some people may want to do all their printing on one size of paper. In that case, why not have a preference for the default and let the user change it when they change paper sizes (if they want)?
Now, if the user happens to notice that a new 8 x 10 inch image is going to be printed in a 4 x 6 area, she will now decide to check the other settings available in the pop up menu. OK, there IS an 8 x 10 inch choice. But look, what's this "Custom" choice? Let's investigate...Now this is strange! The defaults there seem to be 1.383 inches for height AND width! Who came up with that weird number?!
Oh, there is a "Scale to Fit Media" check box. Checking that now makes the height and width somewhat closer to reality, they now indicate the pape dimensions. That IS logical, but not extremely helpful, IMHO. By the way, the second time one selects the "Custom" choice, the correct, original image size appeared in the Print size boxes. Although I cannot seem to get those to reappear. Oh well...
My point is, how do these confusing configurations help? Beyond me, anyway.
BTW, the dpi settings all seem to be 'computed' at one less than the number set by the user for an image. For example, a new image page created at 300 dpi shows 299 in the Custom dialog, 150 shows 149, etc. Close, but why not exact? Furthermore, why can't the user select any dpi they choose? Isn't that what the computer if for; calculate what happens to the pixels when they print at a different setting than the image? Sure, the user should be warned that terrible images my result, but if that's what the user wants, let it be done! Who's running this show, anyway? Oh yeah, I remember, now...excuse me for asking, I'm only a paying customer, what do I know?!
Lastly, if one has more than one image open, every single one can easily be printed, accidentally. Why? Because they will all appear in the Print Dialog. Don't you see them? Over there on the left. Yeah, I see them, but why doesn't the image I have in front, the one I'm working on, be the one I probably want to print? Many of the others may simply be images I'm borrowing parts from. Why do the developers think I always want to print every image that might be open? I don't have any idea, either. Sure, there are a couple of ways to prevent this multiple image printing; select the one you don't want to print and use the "minus" button or simply close all those images before going to the Print dialog. Guess what. Using the 'minus' button only works for this printing, the next time you ask to print they will all be there, again. And, what if you aren't really finished using some of those extra images that you closed? Now you get to re-open them all again. Completely unnecessary steps because of poor user considerations/research, in my humble opinion. Again, this is exactly the thing that preferences are made for. Or, put them in the "Edit Guided" mode! Or, better yet, just give me back the old Print dialog! Nice!
Now, I am extremely glad to see that PSE can now remember to keep that stupid Panel bin out of the way! Finally! Three more inches of screen to work with!!! Hooray!! Unfortunately, it still can't remember what the last setting for the jpeg quality was...still defaults to ZERO! Sure, that's the setting I always want to use, it's so much fun letting people try to guess what is in the image...one would think after 8 iterations this could be fixed. One down, umpteen to go. Oh well, what do you want for $80?Thanks for your listening/reading and I'll take your advice about dropping a note to the developers, but I won't be holding by breath! I doubt that they consider this a real problem. It's really just my ranting!
Your solution is probably the 'fix' they might suggest, anyway. However, I'd rather have the screen space than a list of thumbnails of images I already have open. command-plus and/or minus is a pretty quick way of making it easy to see anything that might be visible. Of course, I'm sure there are other uses for the Project Bin that many find useful. Even though I have a 24" iMac, I rather like using the screen space the way I want, not an arbitrary way that got developed. I just don't see why developers can't program an app to allow every conceivable method of use by every living and future user! LOL!!!
I guess today was the first time I've printed anything since installing 8. I was, quite confused when presented with the new Print interface. Actually, I thought that must be part of the 'Guided' set up which I assume leads one by the hand as much as possible. "Thank you Adobe, but I'm trying to avoid unnecessary contact with strangers right now." LOL! At least I know I didn't miss some setting somewhere.
Thanks! Have a great weekend! And don't get scared too much tonight! -
I can't save the setting for downloads to go to the specified folder (such as the desktop). It works once but it restores to default next time I open Firefox.
== This happened ==
Every time Firefox openedMake sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]] -
UserExit or Customer Exit for F110 - '*' on Vendor Line Item Payment Run
Dear all,
Background
Currently in F110, when processing for vendor payments, the item text ( or segment text) is only printed out when item text begins with an asterik ' * '. The asterik is meant to indicate that this document/item is posted from external system. You may do a F1 on the text field for detail explanation.
In the event, asterik is not present on the item text even if the text is not blank, it will not be printed at all.
Here are two OSS notes on the asteriks: 312623 and 1292333.
Include: F110SFS0_SATZ_KOMPLETTIEREN
*------- Segementtext
IF REGUP-SGTXT(1) NE '*'.
REGUP-SGTXT = SPACE.
ENDIF.
Requirement
User is requesting for item text to be printed at all time, when the text exist, regardless of ' * '.
Question
Does anyone know of a user exit / customer exit that i could use to do modification for SGTXT ?
Would appreciate it, if you could share your suggestions / experiences - on this matter, even if it doesn't need to be resolved through user exits. Thanks in advanceBTW..you have fot following exits for F110;
Transaction Code - F110 Parameters for Automatic Payment
Enhancement/ Business Add-in Description
Enhancement
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001 Enhancement to Transaction FDTA (event after the download)
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB F110: Check before scheduling a proposal/update run -
How to create a value sets for concurrent program?
Hi Friends,
I am creating a concurrent program with a parameter period...
In the value set for the parameter period, I am using the following query :
---where application_id = 101
and set_of_books_id = :$PROFILES$.gl_set_of_bks_id
and closing_status IN ( 'O', 'F', 'C')
order by period_year, period_num' ----
In my cursor, i have a condition 'where set_of_books_id = ' ---
How can I pass the above set of books id into the cursor ?? it is not working when I am defining another parameter as Book and passing that value to the cursor....
I need that period parameter to return all the periods for the set of books where we are running the concurrent request from...I also need to get the set of books id for my cursor...
Hope I am making sense...All that I am trying is to have period parameter and also a SOB id in cursor condition...
Rgds,Hi Vamsi /Nitin,
Let me explain the whole thing now.....
My plsql procedure is ......
CREATE OR REPLACE procedure GL_INT(
perrbuff out varchar2,
pretcode out varchar2,
pbook in varchar2,
pperiod in varchar2
) is
cursor cur1 (p_sdate in date, p_edate in date )is
select distinct group_id groupid,
user_je_source_name source
from gl_interface
where accounting_date >= p_sdate
and accounting_date <= p_edate
and set_of_books_id = pbook;
cursor cur2 is
select distinct start_date sdate,
end_date edate, period_name period
from gl_period_statuses
where period_name = pperiod
and set_of_books_id = pbook
and application_id = 101;
i cur1%rowtype;
j cur2%rowtype;
begin
open cur2;
fnd_file.put_line(fnd_file.output,'PERIOD'||'----'||'GROUPID'||
'----'|| 'SOURCE');
loop
fetch cur2 into J;
exit when cur2%notfound;
open cur1(J.sdate,J.edate);
loop
fetch cur1 into I;
exit when cur1%notfound;
fnd_file.put_line(fnd_file.output, J.period||'----'||I.groupid||'----'||
I.source);
end loop;
end loop;
Close cur1;
close cur2;
Exception when others then dbms_output.put_line(SQLERRM);
end;
==================================================================================================
For SOB value set, I have passed the default value as vamsi suggested ($profiles$.gl_set_of_bks_id)....
For period value set, I have entered query as ..where application_id = 101
and set_of_books_id = :$PROFILES$.gl_set_of_bks_id
and closing_status IN ( 'O', 'F', 'C')
order by period_year, period_num...................
It still doesn't work....I don't know how to derive those Periods based on the SOBs and at the same time pass SOB id into the cursors...
Please help...
Rgds,
Murali -
Best setting for gif animations
what is the optimal setting for animated gifs
Depends on your style and your training as an animator, and
what your project goals are: straight animation? interactivity?
e-cards? Traditional animators used to drawing frame-by-frame with
exposure sheets will feel more comfortable with Toon Boom Studio
(www.toonboom.com). It has far superior drawing tools and color
pallette management and timeline management than Flash. But if
you're used to Illustrator, that may make no difference to you. It
appears that the upcoming Flash CS4 will narrow the gap, as the
interface appears to include enhancements that will be more
familiar to traditional animators, not to mention IK, which Toon
Boom Studio doesn't have (the highly expensive Toon Boom Solo does
have it).
That said, I think Flash is a great program for creating
cartoon animation. You may not think you're interested in
ActionScript programming at this point. I use Flash mainly for
cartoon animation and I resisted ActionScript for a few years. But
once you get used to Flash as an animation tool, and then decide to
dip your little toe into ActionScript, you'll find out what an
astounding tool it is, even for traditional animation, enabling you
to do things impossible in more traditional-oriented programs. Plus
now Flash and Illustrator are fairly well integrated, so you'll be
able to import and export between the two.
On balance, I'd go for Flash. -
Oracle 9.2.0.3.0 patch set for windows - questions
Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions? -
Not working my setting for my icloud
not working my setting for my icloud
In what way is it not working? Please give us more info.
-
Transaction code to view process orders set for deletion
Hi PP Gurus
We are trying to search for transaction code to view the process orders which have status as DLFL i.e deletion flag set for the orders. In cooispi, the deleted orders are not shown in the report output.
I request you to let me know if there is any other code through which we can view deleted process orders.
Thanks & Regards
Harleen KaurDear,
In COOISPI put DLT in system status field and execute the report this will give you the list of all order with deletion flags
Also refer this thread,
COOIS Report for Production orders with status DLFL
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 6, 2009 11:16 AM -
Delivery completed" indicator cannot be set for item 00001
Hi all,
I have done a inter company stock transfer order , with respect to that Order I made Outbound delivery and posted GR with respect to outbound delivery. I have done MIRO for PO for all the Item ,
Now I need to return some material to supplying plant for some reason, I tried to make GR (MIGO) against the same outbound delivery with movement type 122. the document is posted but when I tried to make complete delivery indicator it does not allow me to do so .
it says me
Delivery completed" indicator cannot be set for item 00001
Message no. 06 848
Diagnosis
You have set the "delivery completed" indicator for a stock transfer item.
system Response
You can only set the "delivery completed" indicator in stock transfer items if
o the sum of the goods issue quantities in the supplying plant equal the sum of the goods receipt quantities in the receiving plant.
o the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Regards,
Dhilipan.I dont think you need to set "delivery completed" indicatory while returning from one plant to another.
For example : You ordered 100 qty. and you are receving only 80 Qty. and you don't expect any receipts anymore. in this case you want to close the open purchase order with delivery completed indicator.
But while returning to vendor or to another plant you are not referring the P.O directly and hence you dont need "delivery completed indicator' -
''locking as a duplicate of https://support.mozilla.org/en-US/questions/981122''
I have "Show My Home Page" for the Startup option
I have LastPass set to AutoLogin
I have the cookies for the tab sites in the Cookies Exceptions list
Despite all of this, the tabs are "logged out" when I restart Firefox, and sites that have no logins are not opened based on the web address the tab was originally set for.Type '''about:config''' in the URL and filter
*'''browser.stratup.homepage''' and change the value as the website you need to load.
or
Firefox Menu > Tools > options
*General > Startup > When firefox starts " Show my Home Page"
**Home Page "www.google.com"
Firefox Menu > Tools > options > Privacy > History
*Firefox will: "Use custom settings for history":
*Select: [x] Accept Cookies from sites
**Accept third party cookies: "From Visited"
*Keep until "They Expire"
*Deselect: [ ] "Clear history when Firefox closes"
Maybe you are looking for
-
After upgrading one of our PCs to Windows 8, not all of the bookmarks were in FireFox upon opening the browser for the first time after the upgrade. Only A-C were brought in. We've tried several methods of getting the rest back into the browser with
-
Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00
When i deploy "TutWD_FlightBooking" Sample WebDynpro application I get following error. I have following setup. NetWeaver developer Studio (NWDS) Version: 2.0.9 J2EE server running on the same machine where i have NWDS Version: SAP J2EE Engine/7.00
-
Will this solid state hard drive be compatible with HP Pavilion dm4-1265dx
My stock hard-drive is done for so I thought I would take a bad situation and turn it into an opportunity to upgrade. I want to replace my hard-drive with a 750GB or 1TB SSD or Hybrid, but having a lot of trouble figuring out which one will be compat
-
Styling individual words in scrolling text interaction Captivate 7
Does anybody know if it is possible to style only a portion of text that is being shown within the Captivate 7 scrolling text widget? For example, at the moment if I select a word that I'd like to make bold the entire content of the text pane is made
-
Fatal Error Acrobat failed to connect to a DDE server?
Need help, Adobe Acrobat Pro 11 will not open. Fatal Error Acrobat failed to connect to a DDE server.