Okidata C5300 ISP connection - recognized by won't print

My Okidata C5300 connected via an ISP connection to my home network will no longer print.
My computer (MAC Mini) recognizes the printer, will show the status of supplies, passes the network diagnostics with no problem, but when you send a print job to it, it will not print, and I get an error message "unable to get printer status"
I've uninstalled, reset, reinstalled, etc. and nothing works.
It used to work fine, and still works when I print from an PC I also have connected to my network. I can't isolate exactly when it stopped working, but it may have been related to an automatic software update.
Any thoughts?

I answered my own question. I installed it as a Line Printer Daemon with the TCP/IP address instead of an internet protocol printer, and it works fine (so far). Not sure why, but at least I'm back to printing.

Similar Messages

How set up Airport to connect Mac to isp connection AND play music and print?

I used to have an AX wifi in the house with which I surfed, printed and played music.
My isp recently installed a new modem/wireless router in my home. I now have lots of great speed but they couldn't help me retain the ability to send print jobs and music to my (2nd generation) AX base station.
I know I'm going to have to do a hard reset of my AX to clear out the mess I've created in Network configurations trying to get things working. But once the slate's been cleared, I still don't really have a clue about "creating new networks" vs "extending" existing ones etc etc...
Can anyone assist me to set up a freshly reset base station to "piggy-back" on my new isp's wifi network for printing and music purposes? Or perhaps recommend/pass along an article or other reference source that would assist me in doing so?
Rich

AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Envy114c Won't print

I have an Envy114c network printer, it's connected to the network per the network configuration report, everything I test says it's connected, but it won't print from anything except a test page. I have an excellent connection, When I send a message to the printer, it opens up the printer information and shows it being sent to the buffer, the print icon appears in the task bar, then in a very seconds it disappears, and nothing else happens. I've cleared the Print Que several times. Just doesn't want to work. It's been working for a long time, then I updated the driver using Driver Tool, and it's just gone crazy. At&T doesn't want to help me and I have a contract with Easy support.com they won't touch it. HELP
This question was solved.
View Solution.

Sorry that you are having a problem printing.
You can run the printer and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03275041
Did everything stop working AFTER you updated the driver using driver tool?
Do you know how to restart the print spooler?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Intermittently losing pop smtp and isp connection

Intel Mac Mini, Mountain Lion, 8 GB RAM
Intermittently losing pop, smtp and sometimes isp connectivity.
Can ping to IP address, not to isp name
Same for wired and wireless connection
Other Macs on network do not have the same problem
ISP says no POP or nameserver issues
Have:
run hardware diagnostics - all OK
disk utility -> repair disk - no issues
memtest - no issues
Onyx full maintenance and cleaning - no issues
Erase HD, fresh media re-install, time machine restore
started to lose sanity

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%%_2*} ${f##*.} "$e"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I can't connect my canon mp160 to my new apple iMac desktop. It just won't print although it comes up as the printer. there is no driver for this from canon who states that I probably don't need a driver for this

I can't connect my canon xp160 to my new IMAC. It does recognize it but won't print. there is no driver for this as per Canon and they state that I may not need one. thanks!1

If you want to print, then you will need a printer driver. There is no printer driver available from Apple for the MP160. And the last driver that Canon released for this model was for OS X 10.7. You may be able to install this 10.7 driver, although it is not digitally signed so Gatekeeper will block the installation. To get past Gatekeeper, you can hold down the Control key and click on the installer. A pop-up menu will appear. Select Open. You will then be given the option to install the old driver.
With the driver installed, add the printer via Printers & Scanners and see if you can print.

Printer connected, printer works, but won't print from Mac

I'm helping someone with a printer problem, and I have a mystery on my hands.
The printer is connected (directly), shows up in the printer list, can print a test page, but won't print any document from this computer (it's fine from my laptop).
It's a Mid-2011 Mini, 2.3Ghz, running 10.7.5. The printer is an Epson WF-2540.
This is a USB printer, connected directly to their Mac.
In "Settings", when you select Print/FAX and print a "Test Page" - Success! This is a process that invokes the Epson Driver directly [and bypasses the MAC print queuing mechanism]
When "Printing" from within any application (firefox, TextEdit, winders...)   The job starts to queue, but errors before engaging the printer.
R & R the Epson Drivers, Clear the Printer "stuff" on the Mac, Reinstall drivers from the Epson website, Mac wants to update the "newest" Epson Drivers (kinda' funny when I think about it...).
Still errors.
I attached directly to a USB port on my MacBook Pro. Download drivers, etc.. Works like a champ!
We have deleted the printer from System Prefs, rebooted, and added it back.
We have even gone into Terminal and...
sudo bash
cd /etc/cups/ppd
ls
found EPSON_WF_2540_Series.ppd
cp * /var/tmp/
ls /var/tmp/*.ppd
rm /etc/cups/ppd/*
Still doesn't work.
Anybody have any suggestions?

Hi, it's not clear... did you Rest the Printing system on the Mac?
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.

I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print. What is AirPrint & how do I connect to it?

Patti-
Is your Epson printer on Apple's list of AirPrint capable printers? See <http://support.apple.com/kb/ht4356>.
If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
One other possibility is that there could be a print job stuck in the iPad's print queue. Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen. Scroll across and see if the Print Center is there.
Fred

HP C4780 won't print even though it's wireless connected to my laptop and home network.

Help! I just moved and am trying to set up my Photosmart C4780 to my AT&T 2Wire router (my last router was Netgear and I had no problems with installation/setup). I installed the printer and it seems to be connected to my laptop (OS is Windows 7 32-bit)and network but it just won't print (excel, word, internet page, etc.). I've run the network configuration scan, wireless network report, print diagnostic, and hardware diagnostic. Everything checks out but the test page print will not print. When I try to print some from Word, it gives me a pop up error box saying "Windows cannot print due to a problem with the current printer setup." I don't know what else to try!
Thanks in advance!

Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
See if that works, also see if logging out & back in works.

MacBook Air connected to projector won't display dvd in superdrive, but plays on macBook Air screen.

MacBook Air connected to projector won't display the dvd in the superdrive, but it is playing on the MacBook Air screen.
When dvd is ejected, MB A screen appears on the big screen through the projector. What do I need to do to get the training dvd showing on the screen?
Thanks

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Uncheck “Auto Proxy Discovery”.
Click OK, Apply.

Itunes doesn't open when my ipod touch 4g is connected, consequently it won't charge or sync

itunes doesn't open when my ipod touch 4g is connected, consequently it won't charge or sync

I was surprised too, but I guess nobody gave a cr*p. I figured it out on my own. Basically, sync, then uncheck the box for the option to open iTunes when that iPod is hooked up, sync again, then check the box, and sync one last time. A dialog box pops up that asks if it's OK to install "iTunes Helper". Say "yes". Now it works.

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help...

HT4796 I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac.

I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac

You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718

I downloaded a software update on my iPhone. Now it's asking me to connect to iTunes, but I don't have my computer with iTunes to connect to and won't be able to for a few days. What can I do to use my phone now?

I downloaded a software update on my iPhone. Now it's asking me to connect to iTunes, but I don't have my computer with iTunes to connect to and won't be able to for a few days. What can I do to use my phone now?

Hi,
Thank you for your reply, I did go to my general settings, but for some odd reason I don't have a restrictions setting, or a reset setting. I thought I could reset all the setting to see if it could be that, but as I said there aren't any.
My husband also has the iPad 2, and also did the software update and hasn't had any problems at all. I took both iPad's and compared the settings thinking maybe there could be a setting that could have been changed when the update was done.

My iMessage on my Mac book pro is saying that I have no network connection and it won't let me sign in, it was working perfectly fine at first then one day after updating it just stoped working.

My iMessage on my Mac book pro is saying that I have no network connection and it won't let me sign in, it was working perfectly fine at first then one day after updating it just stoped working.

I have network connection and it still says I don't, I've restart my computer mulitple times everytime it says I don't have connection.

Okidata C5300 ISP connection - recognized by won't print

Similar Messages

Maybe you are looking for