Okidata printer errors after upgrading to OS X Mavericks

Immediately after upgrading to OS X Mavericks, when I try to print with my Okidata C330DN color laser printer will NOT print in color.
I get this message:
"The Print Dialog Extension could not be loaded because it has not been updated to run in this application's secure environment".
I contacted Okidata, who said "give us a week" to update the driver.  Well, they updated their driver, I just installed it, and get THE SAME ERROR...

This is because of sandboxing, and Okidata will need to release another driver that handles these permissions issues. You can try printing from a non-sandboxed application like Safari, if that helps.

Similar Messages

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HT1338 Do I have to reinstall my print drivers after upgrading to 10.8? I seem to have lost both my printers and my ability to download from my camera. Never had problems with 10.7. I'm a little scared.

    Do I have to reinstall my printer drivers after upgrading to 10.8? I seem to have lost the ability to communicate with either of 2 wireless printers and to download pictures from my camera. (Photoshop keeps telling me it can't find the device.) Any suggestions?

    Have you repaired permissions and restarted your computer after installing ML?  Checked your printer settings in System Preferences?
    If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
    Read the various Knowledge Base ML printing articles.  Here are a few to get you started: 
    OS X Mountain Lion: If the software for your printer can’t be found
    OS X Mountain Lion: Troubleshoot a USB printer
    OS X Mountain Lion: Troubleshoot an AirPort printer
    If none of the above work, post back w/the model of your printer and how it's connected to your computer.  USB?  Wireless?

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • Flash 9,0,124,0 security error after upgrade

    I get the following error after upgrading my Flash Player
    (after my system prompted me to install it while running the Flash
    editor):
    Internet Explorer has blocked this site from using an ActiveX
    control in an unsafe manner.
    I have uninstalled and reinstalled the player from the
    browser, about 5 times now and it continues to be a problem for IE.
    Works ok in Firefox if I manually download the FF installer. Is
    there a standalone installer for Vista/IE7 or am I forced to use
    the ActiveX installer which seems to have issues?

    Fix: Removed both (!?more than one?!) versions of flash
    player in my Programs and Features dialog, then ran
    uninstall_flash_player.exe, reset IE7 to factory spec, then
    reinstalled Flash from ActiveX. Seems to be working now.

  • TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

    Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
    My iphoto was working with photostream and now it will not connect at all.
    I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
    help!

    FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

  • Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

    Hi,
    I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
    First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by  '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after  'Patch' is complete."(ERREUR02.jpg). How can I change this status?
    Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
    Thanks for your help.

    Thanks Tammy for the reply
    We already tried the suggested SAP Note couple of time without any luck.
    Regards,
    SJ

  • Error after upgrading from  sap b1 pl 35 to pl 49

    hello sap experts 
    iam getting the following error after upgrading from  sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
    "Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
    regards
    Jenny

    Hello Jenny,
    You may check by supreuser account first to see if you got the same error.  If not, it probably just related to user authorization.  If yes, it must be a bug.
    Thanks,
    Gordon

  • How do I accomplish HP Officejet 6500A printer installation after upgrade to Windows 8?

    How do I accomplish HP Officejet 6500A printer installation after upgrade to Windows 8?

    Hi,
    Please do not touch to the printer, run installation setup on Windows 8 (old or new) machine. The CD may not run at all, what is your 6500A ? E710* what is * ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What can I do if I get an internal power error after upgrading to Windows 10?

    QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
    AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
    First, you'll need to quickly set the boot options to Safe Mode:
    1. Hold the Windows key and press 'R' to open the run box.
    2. Type MSCONFIG, then press ENTER.
    3. Select the BOOT tab.
    4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
    5. Click Apply, then OK.
    6. Click Restart. (If prompted, click Restart anyway.)
    From Safe Mode disable the AMD Display Driver:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Disable, then click Yes to confirm.
    7. Click Close.
    8. Hold the Windows key and press the 'R' key to open the run box.
    9. Type MSCONFIG, then press ENTER.
    10. Select the BOOT tab.
    11. Uncheck Safe boot.
    12. Click Apply, then OK.
    13. Click Restart. (If prompted, click Restart anyway.)
    From Windows 10 started with the AMD Display Driver disabled:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Update Driver.
    7. Click Search automatically for updated driver software.
    8. An AMD driver should be found and installed.
    The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
    The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

    I'm having the same problem.  I got error message 21.  I went to apple store.  they are saying i have a hardware error.  Really, my phone was working before the update.  Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child. 
    Help please,
    I will be glad to go back to the older software update

  • Imac error after upgrade to 10.8.4

    I received an error after upgrade tp brand new imac.  Error was upgrade was not installed.  Upon reboot the version of SW in About thi Mac is 10.8.4.  Bug?
    iMac i7, 21.5" 16GB memory, fusion drive.
    Thanks for input.  I assume the upgrade took.

    Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
    Repairing permissions for “Macintosh HD”
    Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
    Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
    Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
    +++ (multiple repairs)
    Permissions repair complete
    I verfied the HD
    Much text (removed)...
    The volume Macintosh HD appears to be OK.
    I also loaded the Apple downloads version of the upgarde and received the following (again):
    The Installation failed
    The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    Message was edited by: Steve51K

  • Lost Deskjet 5740 printer driver after upgrade.

    Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

    Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
    So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

  • Printer Problems after upgrade to Lion

    Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

    Hi Paul,
    Been away and just got back to this issue.
    Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
    Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
    Thanks for your assistance in this issue.
    Regards,
    Mike, Rustington.

  • I am using macbook air, after upgrading to os x mavericks, i am not able to mount my 1 tb seagate go flex hard drive , any solutions , also iPhoto is not upgrading , every time i try to upgrade, it shows an error.....

    i am using macbook air, after upgrading to os x mavericks, i am not able to mount my seagate 1 TB go flex hard drive, also iphoto upgrades crashes mid way ... what to do ?

    What exactly crashes?  iPhoto upgrades to a library or the application? 
    What format is the external HD?
    OT

  • After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

    After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
    Looks like a problem in OS X. Any solutions?

    I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
    CPU levels have been noticeably lower ever since.

Maybe you are looking for

  • Adding 2nd iPhone To AT&T Account?

    Quick question, folks. I currently have an iPhone 3G on my AT&T account, as well as an additional Nokia phone line on the plan, which charges me an additional $10 a month. My Father decided he would like to get an iPhone 3G, but would like to add it

  • XSL and Oracle Objects

    I am creating a stylesheet to transform an XML document into the proper format to put it in an Oracle table. However, the table was created using several objects. How do I reference the tags for those in the the stylesheet so that they will insert pr

  • Connecting MBPRO to HDTV

    I am attempting to connect my 2010 MBPRO to my Samsung HDTV.  I purchased the Dynex mini display port to HDMI adapter plugged it the computer and attached the HDMI cable.  When attaching the computer screen flashed blue then goes back to normal.  Mea

  • Mail 3.6 Leopard 10.5.8 Issues ?

    I just updated my Tiger Powerbook to Leopard 10.5.8. When i open mail nothing opens and it says unexpectedly quit. I can't get it to launch. Ideas ?

  • REP-1517 error Urgent!!

    I need to run a report which picks out certain paramters like the rep_req_run_dt etc..Now I need to access the rpt_req_no which is defined in another group. So how do I reference that particular field without getting this error. Any help in this rega