OLAP: Data transfer
Hello!
When profiling query through RSRT, I found that too much time (about 87%) is spent on "3200 OLAP: Data transfer" step.
Is there any description, what is computted on this step?
Thank you!
Hi,
It looks like that you have many data cells in the query result.
I recommend you to put less characteristics in the drilldown so that there are less cells.
Adding restriction to the characteristics would also help.
Regards,
Patricia
Similar Messages
-
Possible network issues preventing successful application data transfer?
Hello all.
We are having a few issues with a specific set up here at work involving Oracle 11, and Oracle 9 databases and I was hoping someone with a fair idea of how Oracle configurations work when it comes to network connectivity and data transfer would mind sharing their opinion on the matter.
First off, a bit of background. I'm a network security engineer by trade and my experience when it comes to the application side of things, specifically databases is inherently weak; so I apologise if my terminology or logic is slightly off here.
Basically what I'm trying to determine is where a fault lies between our users using a terminal server and a remote Oracle SQL database that should service their requests.
The problem lies wherein the user will utilise the 'sqlplus' application invoked from a Windows command prompt window, and expect to be able login and query a database. I believe we have two versions available to use, version 9 which is not actually in production but able to be used for testing and version 11 which is active in production.
When accessing Oracle 11 servers will hang where we expect to see a successful connection followed by a healthy looking "SQL>" prompt data transfer appears to stall as follows:
C:\>sqlplus username/[email protected]
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:12:17 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
*hangs here*If we try on the Oracle 9 setup things look fine initially:
C:\>sqlplus username/[email protected]
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:19:20 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - ProductionHowever once connected to the Oracle 9 box; if we run a query similar to:
sqlplus username/[email protected]
select * from <database> where rownum < 10;This will again hang.
That said however, if we try and run a query similar to:
sqlplus username/[email protected]
select * from <database> where rownum < 5;This will return 4 rows of usable data, without issue.
Our systems engineer provided me with a SQLNET trace from the server side and believes he's identified where it occurs:
[21-SEP-2010 16:06:42:989] nsdo: entry
[21-SEP-2010 16:06:42:989] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
[21-SEP-2010 16:06:42:989] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:990] nsdo: nsctx: state=8, flg=0x420c, mvd=0
[21-SEP-2010 16:06:42:990] nsdo: gtn=156, gtc=156, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:990] nsdo: switching to application buffer
[21-SEP-2010 16:06:42:990] nsrdr: entry
[21-SEP-2010 16:06:42:990] nsrdr: recving a packet
[21-SEP-2010 16:06:42:990] nsprecv: entry
[21-SEP-2010 16:06:42:990] nsprecv: reading from transport...
[21-SEP-2010 16:06:42:990] nttrd: entry
# HANG OCCURS HERE
[21-SEP-2010 16:10:13:347] ntt2err: entry
[21-SEP-2010 16:10:13:347] ntt2err: soc 25 error - operation=5, ntresnt[0]=517, ntresnt[1]=131, ntresnt[2]=0
[21-SEP-2010 16:10:13:347] ntt2err: exit
[21-SEP-2010 16:10:13:347] nttrd: exit
[21-SEP-2010 16:10:13:347] nsprecv: transport read error
[21-SEP-2010 16:10:13:347] nsprecv: error exit
[21-SEP-2010 16:10:13:347] nserror: entry
[21-SEP-2010 16:10:13:347] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=131, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[21-SEP-2010 16:10:13:348] nsrdr: error exit
[21-SEP-2010 16:10:13:348] nsdo: nsctxrnk=0
[21-SEP-2010 16:10:13:348] nsdo: error exit
[21-SEP-2010 16:10:13:348] nioqrc: wanted 1 got 0, type 0
[21-SEP-2010 16:10:13:348] nioqper: error from nioqrc
[21-SEP-2010 16:10:13:348] nioqper: nr err code: 0
[21-SEP-2010 16:10:13:348] nioqper: ns main err code: 12547
[21-SEP-2010 16:10:13:348] nioqper: ns (2) err code: 12560
[21-SEP-2010 16:10:13:348] nioqper: nt main err code: 517
[21-SEP-2010 16:10:13:348] nioqper: nt (2) err code: 131
[21-SEP-2010 16:10:13:349] nioqper: nt OS err code: 0
[21-SEP-2010 16:10:13:349] nioqer: entry
[21-SEP-2010 16:10:13:349] nioqer: incoming err = 12151
[21-SEP-2010 16:10:13:349] nioqce: entry
[21-SEP-2010 16:10:13:349] nioqce: exit
[21-SEP-2010 16:10:13:349] nioqer: returning err = 3113
[21-SEP-2010 16:10:13:349] nioqer: exit
[21-SEP-2010 16:10:13:349] nioqrc: exit
[21-SEP-2010 16:10:13:349] nioqds: entry
[21-SEP-2010 16:10:13:349] nioqds: disconnecting...
[21-SEP-2010 16:10:13:349] nsdo: entry
[21-SEP-2010 16:10:13:349] nsdo: cid=0, opcode=67, *bl=0, *what=1, uflgs=0x2, cflgs=0x3
[21-SEP-2010 16:10:13:350] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:10:13:350] nsdo: nsctx: state=1, flg=0x420c, mvd=0
[21-SEP-2010 16:10:13:350] nsdo: nsctxrnk=0
[21-SEP-2010 16:10:13:350] nsdo: error exitFrom the client log side, it looks like this:
[21-SEP-2010 16:06:42:886] nsdo: entry
[21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
[21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
[21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:886] nsdofls: entry
[21-SEP-2010 16:06:42:886] nsdofls: DATA flags: 0x0
[21-SEP-2010 16:06:42:886] nsdofls: sending NSPTDA packet
[21-SEP-2010 16:06:42:886] nspsend: entry
[21-SEP-2010 16:06:42:886] nspsend: plen=17, type=6
[21-SEP-2010 16:06:42:886] nttwr: entry
[21-SEP-2010 16:06:42:886] nttwr: socket 1724 had bytes written=17
[21-SEP-2010 16:06:42:886] nttwr: exit
[21-SEP-2010 16:06:42:886] nspsend: packet dump
[21-SEP-2010 16:06:42:886] nspsend: 00 11 00 00 06 00 00 00 |........|
[21-SEP-2010 16:06:42:886] nspsend: 00 00 03 05 1C 01 01 01 |........|
[21-SEP-2010 16:06:42:886] nspsend: 0F |. |
[21-SEP-2010 16:06:42:886] nspsend: 17 bytes to transport
[21-SEP-2010 16:06:42:886] nspsend: normal exit
[21-SEP-2010 16:06:42:886] nsdofls: exit (0)
[21-SEP-2010 16:06:42:886] nsdo: nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: normal exit
[21-SEP-2010 16:06:42:886] nsdo: entry
[21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
[21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
[21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:886] nsdo: switching to application buffer
[21-SEP-2010 16:06:42:886] nsrdr: entry
[21-SEP-2010 16:06:42:886] nsrdr: recving a packet
[21-SEP-2010 16:06:42:886] nsprecv: entry
[21-SEP-2010 16:06:42:886] nsprecv: reading from transport...
[21-SEP-2010 16:06:42:886] nttrd: entry
# HANG OCCURS HERE
# Need to <CTRL C> twice to kill
#I've tried searching the net for similar occurrences of some of the interesting looking trace data but there appears to be limited information available, none of which is terribly helpful.
What I'm really after is either someone who has had this issue before, or someone who can better interpret the error output from the trace files and perhaps give me an idea of what's causing it to occur. Specifically whether that error text above relates to a failed connection on the underlying network connectivity side of things or whether it may be something on a higher level within the application layers. We have done packet dumps on firewalls to check the traffic as it traverses the firewall but there are no anomalies that I can see which may be contributing to the issue at hand.
I have organised for some testing to occur within the next 24 hours as there is a Cisco ASA Firewall that sits in the network path that is performing inspection on packets travelling through it. The inspection for SQLNET specifically is disabled, but we intend to enable this once more for testing to see whether it makes a difference. I'm not entirely confident it will however, and until we do get a chance to test any constructive input or alternate ideas will be greatly appreciated. I'm trying to cover as many bases as possible here.
Cheers,
Josh.So some further testing doesn't show anything interesting. But that said here's a look at a TCP Dump for the Oracle 11 session that hangs:
SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
tcpdump: WARNING: bond0: no IPv4 address assigned
tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
21:55:43.781596 IP (tos 0x0, ttl 126, id 24439, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.62008 > 172.x.x.x.1521: S, cksum 0x4d0a (correct), 2416392635:2416392635(0) win 64512 <mss 1380,nop,nop,sackOK>
21:55:43.782454 IP (tos 0x0, ttl 59, id 50281, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: S, cksum 0xc0ae (correct), 3123579836:3123579836(0) ack 2416392636 win 49680 <mss 1460,nop,nop,sackOK>
21:55:43.783311 IP (tos 0x0, ttl 126, id 24440, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0xb382 (correct), 1:1(0) ack 1 win 64512
21:55:43.787142 IP (tos 0x0, ttl 126, id 24441, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 1:245(244) ack 1 win 64512
21:55:43.788504 IP (tos 0x0, ttl 59, id 50282, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xed72 (correct), 1:1(0) ack 245 win 49436
21:55:43.859023 IP (tos 0x0, ttl 59, id 50283, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: P, cksum 0xe166 (correct), 1:9(8) ack 245 win 49680
21:55:43.860392 IP (tos 0x0, ttl 126, id 24445, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 245:489(244) ack 9 win 64504
21:55:43.861773 IP (tos 0x0, ttl 59, id 50284, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xeb82 (correct), 9:9(0) ack 489 win 49680
21:55:43.861908 IP (tos 0x0, ttl 59, id 50285, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.62008: P 9:41(32) ack 489 win 49680
21:55:43.865341 IP (tos 0x0, ttl 126, id 24446, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.62008 > 172.x.x.x.1521: P 489:645(156) ack 41 win 64472
21:55:43.867017 IP (tos 0x0, ttl 59, id 50286, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.62008: P 41:168(127) ack 645 win 49680
21:55:43.874836 IP (tos 0x0, ttl 126, id 24447, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.62008 > 172.x.x.x.1521: P 645:682(37) ack 168 win 64345
21:55:43.876405 IP (tos 0x0, ttl 59, id 50287, offset 0, flags [DF], proto: TCP (6), length: 226) 172.x.x.x.1521 > 125.x.x.x.62008: P 168:354(186) ack 682 win 49680
21:55:43.995921 IP (tos 0x0, ttl 126, id 24451, offset 0, flags [DF], proto: TCP (6), length: 1420) 125.x.x.x.62008 > 172.x.x.x.1521: . 682:2062(1380) ack 354 win 64159
21:55:43.995978 IP (tos 0x0, ttl 126, id 24452, offset 0, flags [DF], proto: TCP (6), length: 671) 125.x.x.x.62008 > 172.x.x.x.1521: P 2062:2693(631) ack 354 win 64159
21:55:43.999910 IP (tos 0x0, ttl 59, id 50288, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xe18d (correct), 354:354(0) ack 2693 win 49680
21:55:44.015402 IP (tos 0x0, ttl 126, id 24455, offset 0, flags [DF], proto: TCP (6), length: 326) 125.x.x.x.62008 > 172.x.x.x.1521: P 2693:2979(286) ack 354 win 64159
21:55:44.020491 IP (tos 0x0, ttl 59, id 50289, offset 0, flags [DF], proto: TCP (6), length: 1420) 172.x.x.x.1521 > 125.x.x.x.62008: . 354:1734(1380) ack 2979 win 49680
21:55:44.020789 IP (tos 0x0, ttl 59, id 50290, offset 0, flags [DF], proto: TCP (6), length: 671) 172.x.x.x.1521 > 125.x.x.x.62008: P 1734:2365(631) ack 2979 win 49680
21:55:44.021015 IP (tos 0x0, ttl 59, id 50291, offset 0, flags [DF], proto: TCP (6), length: 355) 172.x.x.x.1521 > 125.x.x.x.62008: P 2365:2680(315) ack 2979 win 49680
21:55:44.022489 IP (tos 0x0, ttl 126, id 24457, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0x9ea4 (correct), 2979:2979(0) ack 2365 win 64512
21:55:44.148236 IP (tos 0x0, ttl 126, id 24461, offset 0, flags [DF], proto: TCP (6), length: 215) 125.x.x.x.62008 > 172.x.x.x.1521: P 2979:3154(175) ack 2680 win 64197
21:55:44.152125 IP (tos 0x0, ttl 59, id 50292, offset 0, flags [DF], proto: TCP (6), length: 187) 172.x.x.x.1521 > 125.x.x.x.62008: P 2680:2827(147) ack 3154 win 49680
21:55:44.174040 IP (tos 0x0, ttl 126, id 24462, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
21:55:44.732635 IP (tos 0x0, ttl 126, id 24482, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
21:55:44.735346 IP (tos 0x0, ttl 59, id 50294, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xcefc (correct), 3632:3632(0) ack 4168 win 49680
21:56:17.076742 IP (tos 0x0, ttl 126, id 25631, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: R, cksum 0x942e (correct), 4168:4168(0) ack 2827 win 0
*SQL session hangs here*The 'RESET' occurs when I kill the client using CTRL+C after a long period of inactivity, not during the session itself.
And then.. Here's a successful login and query of 7 rows on the Oracle 9 database from a network perspective:
SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
tcpdump: WARNING: bond0: no IPv4 address assigned
tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
21:53:27.598450 IP (tos 0x0, ttl 126, id 19396, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.61937 > 172.x.x.x.1521: S, cksum 0xc9b4 (correct), 2519356327:2519356327(0) win 64512 <mss 1380,nop,nop,sackOK>
21:53:27.612189 IP (tos 0x0, ttl 53, id 46015, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: S, cksum 0x1cdb (correct), 1010936359:1010936359(0) ack 2519356328 win 49680 <mss 1460,nop,nop,sackOK>
21:53:27.612905 IP (tos 0x0, ttl 126, id 19398, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0x0faf (correct), 1:1(0) ack 1 win 64512
21:53:27.616233 IP (tos 0x0, ttl 126, id 19399, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 1:282(281) ack 1 win 64512
21:53:27.629987 IP (tos 0x0, ttl 53, id 46016, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4886 (correct), 1:1(0) ack 282 win 49680
21:53:27.692135 IP (tos 0x0, ttl 53, id 46017, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: P, cksum 0x3d6e (correct), 1:9(8) ack 282 win 49680
21:53:27.693603 IP (tos 0x0, ttl 126, id 19402, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 282:563(281) ack 9 win 64504
21:53:27.707460 IP (tos 0x0, ttl 53, id 46018, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4765 (correct), 9:9(0) ack 563 win 49680
21:53:27.707883 IP (tos 0x0, ttl 53, id 46019, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.61937: P 9:41(32) ack 563 win 49680
21:53:27.711950 IP (tos 0x0, ttl 126, id 19403, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.61937 > 172.x.x.x.1521: P 563:719(156) ack 41 win 64472
21:53:27.725971 IP (tos 0x0, ttl 53, id 46020, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.61937: P 41:168(127) ack 719 win 49680
21:53:27.734468 IP (tos 0x0, ttl 126, id 19405, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.61937 > 172.x.x.x.1521: P 719:756(37) ack 168 win 64345
21:53:27.748270 IP (tos 0x0, ttl 53, id 46021, offset 0, flags [DF], proto: TCP (6), length: 199) 172.x.x.x.1521 > 125.x.x.x.61937: P 168:327(159) ack 756 win 49680
21:53:27.878720 IP (tos 0x0, ttl 126, id 19409, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
21:53:28.994991 IP (tos 0x0, ttl 126, id 19443, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
21:53:29.010680 IP (tos 0x0, ttl 53, id 46023, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3d83 (correct), 1276:1276(0) ack 1826 win 49680
21:53:32.561849 IP (tos 0x0, ttl 53, id 46024, offset 0, flags [DF], proto: TCP (6), length: 989) 172.x.x.x.1521 > 125.x.x.x.61937: P 327:1276(949) ack 1826 win 49680
21:53:32.710661 IP (tos 0x0, ttl 126, id 19550, offset 0, flags [DF], proto: TCP (6), length: 223) 125.x.x.x.61937 > 172.x.x.x.1521: P 1826:2009(183) ack 1276 win 63237
21:53:32.724384 IP (tos 0x0, ttl 53, id 46025, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3ccc (correct), 1276:1276(0) ack 2009 win 49680
21:53:32.732636 IP (tos 0x0, ttl 53, id 46026, offset 0, flags [DF], proto: TCP (6), length: 133) 172.x.x.x.1521 > 125.x.x.x.61937: P 1276:1369(93) ack 2009 win 49680
21:53:32.739922 IP (tos 0x0, ttl 126, id 19553, offset 0, flags [DF], proto: TCP (6), length: 947) 125.x.x.x.61937 > 172.x.x.x.1521: P 2009:2916(907) ack 1369 win 63144
21:53:32.763266 IP (tos 0x0, ttl 53, id 46027, offset 0, flags [DF], proto: TCP (6), length: 329) 172.x.x.x.1521 > 125.x.x.x.61937: P 1369:1658(289) ack 2916 win 49680
21:53:32.770925 IP (tos 0x0, ttl 126, id 19555, offset 0, flags [DF], proto: TCP (6), length: 78) 125.x.x.x.61937 > 172.x.x.x.1521: P 2916:2954(38) ack 1658 win 64512
21:53:32.784774 IP (tos 0x0, ttl 53, id 46028, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 1658:1836(178) ack 2954 win 49680
21:53:32.787455 IP (tos 0x0, ttl 126, id 19556, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
21:53:33.478760 IP (tos 0x0, ttl 126, id 19578, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
21:53:33.492256 IP (tos 0x0, ttl 53, id 46030, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34ce (correct), 2268:2268(0) ack 3063 win 49680
21:53:36.820908 IP (tos 0x0, ttl 53, id 46031, offset 0, flags [DF], proto: TCP (6), length: 472) 172.x.x.x.1521 > 125.x.x.x.61937: P 1836:2268(432) ack 3063 win 49680
21:53:36.824225 IP (tos 0x0, ttl 126, id 19733, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 3063:3080(17) ack 2268 win 63902
21:53:36.837345 IP (tos 0x0, ttl 53, id 46032, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34bd (correct), 2268:2268(0) ack 3080 win 49680
21:53:36.838015 IP (tos 0x0, ttl 53, id 46033, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 2268:2338(70) ack 3080 win 49680
21:53:36.839520 IP (tos 0x0, ttl 126, id 19734, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3080:3119(39) ack 2338 win 63832
21:53:36.853507 IP (tos 0x0, ttl 53, id 46034, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2338:2516(178) ack 3119 win 49680
21:53:36.855886 IP (tos 0x0, ttl 126, id 19735, offset 0, flags [DF], proto: TCP (6), length: 160) 125.x.x.x.61937 > 172.x.x.x.1521: P 3119:3239(120) ack 2516 win 63654
21:53:36.870292 IP (tos 0x0, ttl 53, id 46035, offset 0, flags [DF], proto: TCP (6), length: 99) 172.x.x.x.1521 > 125.x.x.x.61937: P 2516:2575(59) ack 3239 win 49680
21:53:36.879557 IP (tos 0x0, ttl 126, id 19738, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3239:3278(39) ack 2575 win 63595
21:53:36.893506 IP (tos 0x0, ttl 53, id 46036, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2575:2753(178) ack 3278 win 49680
21:53:36.895884 IP (tos 0x0, ttl 126, id 19739, offset 0, flags [DF], proto: TCP (6), length: 292) 125.x.x.x.61937 > 172.x.x.x.1521: P 3278:3530(252) ack 2753 win 63417
21:53:36.911464 IP (tos 0x0, ttl 53, id 46037, offset 0, flags [DF], proto: TCP (6), length: 305) 172.x.x.x.1521 > 125.x.x.x.61937: P 2753:3018(265) ack 3530 win 49680
21:53:36.913580 IP (tos 0x0, ttl 126, id 19740, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3530:3569(39) ack 3018 win 63152
21:53:36.927515 IP (tos 0x0, ttl 53, id 46038, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3018:3196(178) ack 3569 win 49680
21:53:36.938328 IP (tos 0x0, ttl 126, id 19742, offset 0, flags [DF], proto: TCP (6), length: 315) 125.x.x.x.61937 > 172.x.x.x.1521: P 3569:3844(275) ack 3196 win 64512
21:53:36.953008 IP (tos 0x0, ttl 53, id 46039, offset 0, flags [DF], proto: TCP (6), length: 183) 172.x.x.x.1521 > 125.x.x.x.61937: P 3196:3339(143) ack 3844 win 49680
21:53:36.961020 IP (tos 0x0, ttl 126, id 19743, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3844:3883(39) ack 3339 win 64369
21:53:36.974890 IP (tos 0x0, ttl 53, id 46040, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3339:3517(178) ack 3883 win 49680
21:53:36.977183 IP (tos 0x0, ttl 126, id 19744, offset 0, flags [DF], proto: TCP (6), length: 208) 125.x.x.x.61937 > 172.x.x.x.1521: P 3883:4051(168) ack 3517 win 64191
21:53:36.991461 IP (tos 0x0, ttl 53, id 46041, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 3517:3587(70) ack 4051 win 49680
21:53:36.993439 IP (tos 0x0, ttl 126, id 19747, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4051:4090(39) ack 3587 win 64121
21:53:37.007199 IP (tos 0x0, ttl 53, id 46042, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3587:3765(178) ack 4090 win 49680
21:53:37.011239 IP (tos 0x0, ttl 126, id 19748, offset 0, flags [DF], proto: TCP (6), length: 183) 125.x.x.x.61937 > 172.x.x.x.1521: P 4090:4233(143) ack 3765 win 63943
21:53:37.025767 IP (tos 0x0, ttl 53, id 46043, offset 0, flags [DF], proto: TCP (6), length: 210) 172.x.x.x.1521 > 125.x.x.x.61937: P 3765:3935(170) ack 4233 win 49680
21:53:37.027455 IP (tos 0x0, ttl 126, id 19750, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4233:4272(39) ack 3935 win 63773
21:53:37.041382 IP (tos 0x0, ttl 53, id 46044, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3935:4113(178) ack 4272 win 49680
21:53:37.044708 IP (tos 0x0, ttl 126, id 19751, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4272:4307(35) ack 4113 win 63595
21:53:37.058388 IP (tos 0x0, ttl 53, id 46045, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4113:4129(16) ack 4307 win 49680
21:53:37.060398 IP (tos 0x0, ttl 126, id 19752, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4307:4342(35) ack 4129 win 63579
21:53:37.073926 IP (tos 0x0, ttl 53, id 46046, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4129:4145(16) ack 4342 win 49680
21:53:37.088056 IP (tos 0x0, ttl 126, id 19753, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xf23e (correct), 4342:4342(0) ack 4145 win 63563
21:53:56.309909 IP (tos 0x0, ttl 126, id 20509, offset 0, flags [DF], proto: TCP (6), length: 176) 125.x.x.x.61937 > 172.x.x.x.1521: P 4342:4478(136) ack 4145 win 63563
21:53:56.325783 IP (tos 0x0, ttl 53, id 46047, offset 0, flags [DF], proto: TCP (6), length: 398) 172.x.x.x.1521 > 125.x.x.x.61937: P 4145:4503(358) ack 4478 win 49680
21:53:56.329152 IP (tos 0x0, ttl 126, id 20511, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
21:53:56.557234 IP (tos 0x0, ttl 126, id 20519, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
21:53:56.570496 IP (tos 0x0, ttl 53, id 46049, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24ea (correct), 4904:4904(0) ack 4495 win 49680
21:53:58.561449 IP (tos 0x0, ttl 53, id 46051, offset 0, flags [DF], proto: TCP (6), length: 441) 172.x.x.x.1521 > 125.x.x.x.61937: P 4503:4904(401) ack 4495 win 49680
21:53:58.602228 IP (tos 0x0, ttl 126, id 20579, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4495:4534(39) ack 4904 win 64512
21:53:58.615281 IP (tos 0x0, ttl 53, id 46052, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24c3 (correct), 4904:4904(0) ack 4534 win 49680
21:53:58.616571 IP (tos 0x0, ttl 53, id 46053, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 4904:5082(178) ack 4534 win 49680
21:53:58.745531 IP (tos 0x0, ttl 126, id 20584, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xead2 (correct), 4534:4534(0) ack 5082 win 64334
21:54:01.476582 IP (tos 0x0, ttl 126, id 20707, offset 0, flags [DF], proto: TCP (6), length: 53) 125.x.x.x.61937 > 172.x.x.x.1521: P 4534:4547(13) ack 5082 win 64334
21:54:01.492998 IP (tos 0x0, ttl 53, id 46054, offset 0, flags [DF], proto: TCP (6), length: 53) 172.x.x.x.1521 > 125.x.x.x.61937: P 5082:5095(13) ack 4547 win 49680
21:54:01.499924 IP (tos 0x0, ttl 126, id 20709, offset 0, flags [DF], proto: TCP (6), length: 50) 125.x.x.x.61937 > 172.x.x.x.1521: P, cksum 0xe469 (correct), 4547:4557(10) ack 5095 win 64321
21:54:01.500558 IP (tos 0x0, ttl 126, id 20710, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: F, cksum 0xeaba (correct), 4557:4557(0) ack 5095 win 64321
21:54:01.513561 IP (tos 0x0, ttl 53, id 46055, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: F, cksum 0x23ec (correct), 5095:5095(0) ack 4557 win 49680
21:54:01.513628 IP (tos 0x0, ttl 53, id 46056, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x23eb (correct), 5096:5096(0) ack 4558 win 49680
21:54:01.514175 IP (tos 0x0, ttl 126, id 20713, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xeab9 (correct), 4558:4558(0) ack 5096 win 64321The above is obviously fine, but it's really quite strange. I can get the Oracle 9 queries to hang if I select over 7 rows (8 being the point at which it dies).
So I can run
Sqlplus user/[email protected]
Select * from <blah> where rownum < 7;Over and over again, as many times as I like without issue.
But!.. As soon as I run
Sqlplus user/[email protected]
Select * from <blah> where rownum < 8;The session will hang, and from a network perspective there are no packets being transferred in either direction. It looks exactly like the Oracle 11 session in that the session is still ESTABLISHED from a client perspective but no data is flowing in either direction..
Does anyone have any idea why '8' is the magic number that would be causing it to hang? I'm really stuggling to see from a network perspective how this may be occuring, as above the TCPDump looks clean.
Unfortunately I don't have access do a dump on the client/server itself however, just on the network path. I guess that may be where we need to be looking next.
Thanks for the ideas so far all, much appreciated.
Josh. -
How to find the max data transfer rate(disk speed) supported by mobo?
I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section. -
ISSUE:regarding production version tab of MRP4 of data transfer using BD10
Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA -
We run a small network in our office consisting mainly of Intel iMacs we purchased several months ago. The server computer is a brand new Intel Mac Pro server with 4 500 gig drives raided together, two 2.66GHz dual core intel processors, all the other bells and whistles we could think of, etc. We added in two fiber-optic switches: one in the server room, one in the office. The switches connect to each other and the server with fiber optic cables, but the iMacs connect with ethernet cables.
We had the iMacs for a while but we just recently got the new server and upgraded our old 100 base switches. Afterwards we wanted to test out the data transfer speeds, as we plan to back up to the server frequently. We were dismayed to find that transfer rates capped out at 60 MegaBytes/sec according to the Activity Monitor's Network Activity tab. In fact, it would range mostly from 40-45MB/sec. None of us here have much experience with networking, but that seemed a tad too slow. My basic math tells me that a byte is 8 bits, and from that a Gigabit network should transfer data at 120 MegaBytes/sec, which is three times the speeds we were actually seeing.
We sent data both to and from the server in order to test this. Thinking it was perhaps a problem with the ethernet itself, we grabbed an external FireWire hard drive and transferred data from one of the iMacs directly to it and noticed exactly the same transfer rates. We plugged two iMacs directly into each other and transferred at the same rate, ~45MB/sec.
Well this was highly frustrating. All Macs supposedly ship with Gigabit ethernet since, what, 2002? Earlier? Why are our speeds so slow? We thought the hard drives might be slow, so we got info on the drives and googled them for their tech specs. The iMacs' Western Digital drives are capable of much much faster speeds according to everything we've read.
We started reading anything we could online that addressed this issue. Some information read the problem might be that the optical DVD-R/CD-R drive was only capable of slower transfer speeds. Since the optical drive and the hard drive are on the same bus it would slow down the hard drive's maximum transfer rate, much like having a Gigabit hub with a 10 base computer plugged into it would slow the entire network down (which is of course why we use switches instead of hubs). Is there any truth to this? If this is, in fact, the case, can we bypass this bottleneck somehow? I'm not talking about opening the computer and manually disabling the optical drive, as that's a waste of a perfectly good DVD-R/CD-R drive.
Also, if this is true, why in blue blazes is Apple flaunting Gigabit ethernet if the computer can only take advantage of 1/3 the speeds Gigabit ethernet has to offer?! I'll happily provide any more information that's relevant to the problem at hand.
Thank you
Mac OS X (10.4.8)Here's the specs for the default Hard Drive that Apple put in here:
http://www.westerndigital.com/en/products/Products.asp?DriveID=137
From that page
Buffer To Host (Serial ATA) 300 MB/s (Max)
Buffer To Disk 748 Mbits/s (Max)
I have no idea what signaling overhead for my data transfer protocol means.
The ethernet cords are no longer than 20 feet, are all Cat5E, and are well shielded. There is little to no ElectroMagnetic interference in any area they run. The longest cable is the Fiber Optic one, which runs about... oh... 40 yards? These were all installed by professionals.
I feel it's important to stress the fact that we tested an isolated direct computer to computer transfer with a single 6 foot Cat5E Ethernet cable and still experienced the same speeds that we experienced over the network. We tested multiple computers, multiple cables, multiple files. -
Issues with data transfer / connectivi​ty
Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
ThanksYou can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com -
Init w/o data transfer shows Added/Transfrd - 1/1
Hi ,
Init w/o data transfer load was successful after having applied <i>Note 689964 - ODS object: Switching from a full to delta upload !</i>
I have two weird ( nt sure ) issues below :
<b>Issue 1</b>
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?
<b>
Issue 2</b>
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
Please comment SDNer'sDear Jr.Roberto,
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?
<b>
--> When you do a init with out data transfer, system transfers one record that is not corresponding to the data, but is a control record corresponding to the init selections.</b>
Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
<b>---> It is because you dont have a active update rules maintained for the infosource to the data target, or you have not selected any data target in the infopackage , it can also be the case that the infopackage which generates a program to start the load is having some errors, if possbile create another infopackage and start the load with active Update rules to data target.</b>
Cheers!!!!
Charan
Message was edited by:
Sri Krishna Charan Viswanatha -
Hello Everyone,
I have a new 2TB Time Capsule running with a MacBook Air. I want to use the TC to access data (Aperture library, iTunes library, other Files) and to backup my MacBook Air via Time Machine. I set it up, integrated the TC in my Network (FritzBox) by choosing "extend existing network" and it works. BUT only with 1.1Mbit/second while writing or reading Data to/from it. Internet speed is very good, like it was before. While the 1.1Mbit/second seem to be ok with Aperture and iTunes (streaming music and movies) it is still painfully slow and I'm not realy happy with that
I've read that:
The 1.1Mbit problem is pretty common when Time Capsule is integrated and used to extend a network (bridge modus), it also looses all ethernet connectivity then (that woul explain why connecting it by ethernet didn't help during initial setup and data transfer)
Is there a solution besides ditching the Fritzbox and using the TC to build the network? Because basicly I still need the Fritzbox for its DECT features.
Thank you for any help in advance and have a nice day,
OlliYou have double hop wireless with this setup..
You should bridge the TC.. that is router bridge not wireless bridge, and plug the TC into the Frizyboy by ethernet.
Then you can setup the TC wireless to reinforce the fritzy..
Same wireless name as SSID.
Same security settings... really should be WPA2 AES or in TC personal.
Same password..
Just different wireless channel.
Then you can use 5ghz on the TC if you are up close and personal. -
Data transfer b/w SAP to Java using IDOC and Interface SAP Jco
Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VELHi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P -
Hi - I would like to build the logic in which it should accomodate the communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer.
I want to do data transfer b/w host and RT through RS232 VISA portal whenever TCP/IP ethernet cable has been unplugged from the controller continuosly , it should keep on checking for TCP/IP link re-establishing also , when ever the tcp/ip link established again that time the communication should be using in that link only. This is accomplished by deploying the RT vi as execuatbale file. I made some logic regards to the above said logic , bur it was not working as much I expected.
I request you to go through the attached two VI's and let me know , what I did wrong in that,
Please do the needful.
Attachments:
TCP_Serial_Host.vi 33 KB
TCP_Serial_RT.vi 41 KBeven i am new to this topic and i am trying to get familiar with these protocols
refer to tcp server/client examples in labview examples -
Problems with Photoshop performance and data transfer speed on iMac
Two months ago, I started noticing slow performances using Photoshop (above all using clone stamp tool) on my 27" iMac (late 2012). I did the AHT and I found that 8GB of 32GB RAM were broken.
I removed them but the problem didn't disappered, I also noticed that data transfer speed (both copy and paste from/to internal HD and from CF card/external HD) was really slow.
I tried many solutions suggested by Apple support, none of them worked out. At the end, I tried uninstalling and re-installing Photoshop: no more problems!!!
10 days ago, I received a new 8GB RAM module and so I installed it back... suddenly, the problem came back, I tried re-installing again Photoshop but the problem, this time, still persist!
Does anyone had the same experience? All other CC programs work well (LR, AE, Premiere...)yes, it does!
what seems to be very strange to me is how data trasnfer speed could be affected!
(just to say, I've already tried reset of SMC and PRAM, I've tried with different accounts and I've also re-installed the OS, next step would be formatting the disk and installing the OS from zero) -
What is the difference between copy requirement and data transfer routines
Hi Experts,
I am writing a copy control routine for maintainence quote
from sales quote.Where do i have to write it in VOFM?
Is it in copying requirements or data transfer.
Actually according to the business all the line items from the sales quote are copied
into the maintainence quote and additional line items are added into maintainence quote
and the line items copied from the source document are linked to the two newly added
line items.
Please advise.
And is it possible to add the 2 new line items to the new document into VBAP at the runtime?
Regards,
ChitrasenFirst of all you have to have a link between the sales documents. You can check it in Tcode: VTAA. if not, talk to your functional people. Try to make this equal to quote to order but instead make it quote to quote.
You need to put break point in copy requirement as well as in data transfers and check for your requirement.
Well, the code you want to put in will be the requirement
I am not sure if you can add 2 line items runtime into quote. this has to go through different checks and i dont think it is possible.
Good luck -
HI,
I want to ask will it be possible that entire one GL data Transfer to another GL with out passing JV by any T-code or any other way?HI
If you have posted any document in thesystem it would need another document posting or reversal for its correction ,
Regds
Rajiv -
Asset Legacy data transfer reconciliation with GL
We have recently merged a deactivated company code with our operating company and transferred all Finance processes, open items,master data etc.
We transferred assets using Legacy Data Transfer AB91 (we did not use intercompany asset transfer ABT1N).
We then transferred the Trial Balance.
The asset balances reconcile against the GL accounts for the transferred assets when executing S_ALR_87011964 and FS10N.
However there is a difference in ABST2 which is the same difference as the migrated assets.
I would expect there to be no difference between FI and AA for legacy data transfer
I have also run ABST for all affected GL accounts and there is no difference when executing this report.
Note that the company code migration occurred in January 2008, there is no effect on 2007 year end data.Hi
You have to take over the GL balance using OASV t.code
regards
Sibichan -
Error while executing Initialize with Data Transfer for 0FI_GL_10
Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
SnehaHi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 09/07/2011 11:25:32
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "ORA-01652: unable to extend temp segment by 128
in tablespace PSAPTEMP"
Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
"FETCH_TO_ISTRUCTURE".
The main program was "SBIE0001 ".
In the source code you have the termination point in line 903
of the (Include) program "GP_GLX_FAGLFLEXT".
The program "GP_GLX_FAGLFLEXT" was started as a background job.
Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
Job Initiator.. "BIWREMOTE"
Job Number..... 11203300
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
840 of the (Include program "GP_GLX_FAGLFLEXT ".
Maybe you are looking for
-
Skype Calls not received when MacBook Air is asleep
My MacBook Air is running Mountain Lion OS 10.8.5 with Skype 6.14. Skype video calls are received normally with notification sounds as long as the MacBook Air is not asleep. It will also receive a video call one time while asleep if Skype has first b
-
BootCamp: Windows 7 installation fails display only gets black
Hello i have a late 2008 macbook pro 15 with core 2 duo 2.66GHZ and 9400M. I have a big problem: i want to install windows 7 but via bootcamp it doesnt work! Partition is done the computer starts to install windows and then the display gets black and
-
I have been given the task to use Java Web Start to distribute a java application that I have been working on. I have been reading the developers guide from http://java.sun.com/products/javawebstart/docs/developersguide.html Well, I can't get past th
-
I have downloaded and am successfully running Mountain Lion on my iMac. The app icon in dock keeps showing a red circle that tells me to download Mountain Lion (not an update)!!! When I go there they want the 19.99 to install just as if there is no
-
Playing Windows Games on Mac, without having to install Windows?
I don't necessarily know if this is a question for this category, but is it possible? Is there a patch or program I can download to play games for Windows on my Mac?