OLAP Universe - Error: DBD Runtime Error: In Catalogue List: Unknown Error

Hi there,
I have a problem while creating a universe on top of a BW Query/Cube.
While creating a connection to the BW System (using a message server)
an error occurs: DBD Runtime Exception: Error in Calling Catalog List: Unknown Error
So, no catalogue list is generated --> I don't see any cubes/queries in the list.
Can anyone help?
Thanks & regards, Marielle

Hi Marielle
Why are you using message server?
Application server is much more stable...
Can you do a normal SAP logon via this message server (same parameters off course)?
Hope this helps,
Marianne

Similar Messages

  • When saving illustrator work getting an error "operation cannot complete because of an unknown error" [UNKN]

    when saving illustrator work getting an error "operation cannot complete because of an unknown error" [UNKN]

    Without proper system info and other details like where you are saving nobody can tell you anything. You haven#t even told us your version of AI...
    Mylenium

  • HT201442 I am getting the error "ipad could not be restored. an unknown error occurred (3194)" while trying to restore. tried steps 2 n 3 but stil error persists!

    I am getting the error "ipad could not be restored. an unknown error occurred (3194)" while trying to restore. tried steps 2 n 3 but stil error persists!

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • TS3694 I waited about an hour to download IOS 7 and at the very end, it said An unknown error occured (6). What is this "unknown" error?

    So basically I waited about an hour for itunes to update my iPhone to IOS 7 and it is currently frozen because it had an (error 6) right at the end up the update. What do I do now? Why is it not updating?

    An unknown error occured (6). What is this "unknown" error?
    Don't know - it's unknown.
    Try again, when the Apple servers are less busy.

  • Itunes Error occured while converting this file An unknown error occured (-11828)

    So I'm trying to convert a movie for my ipod because it would not accept the current version but I go and try to convert it to an iphone or ipod version and it gives me this error "Error occured while converting this file An unknown error occured (-11828)" Any ideas?

    Hi, LongIsland14. 
    Thank you for visiting Apple Support Communities.
    This issue would be related to a permission issue most likely with the iTunes Media folder.  Here are a couple articles that will help you troubleshoot this issue.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Cheers,
    Jason H.

  • App store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8

    app store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8

    Microsoft Windows 8 Business Edition (Build 9200)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0150B8980AD913B8
    Current user is not an administrator.
    The current local date and time is 2014-03-18 04:37:01.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.5.5 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {240FD97D-8118-4928-BF4E-8A531F89D837}
    Description:    Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Adapter Name:    {BCD0EF3F-C4A4-402C-969A-C46C079E56A6}
    Description:    Bluetooth Device (Personal Area Network)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Adapter Name:    {DD5C0797-BC23-4732-85FE-AC59C926EE98}
    Description:    Realtek PCIe GBE Family Controller
    IP Address:    10.144.120.70
    Subnet Mask:    255.255.255.0
    Default Gateway:    10.144.120.1
    DHCP Enabled:    Yes
    DHCP Server:    10.144.120.3
    Lease Obtained:    Tue Mar 18 03:26:26 2014
    Lease Expires:    Mon Jun 16 03:26:26 2014
    DNS Servers:    10.144.5.30
            10.144.130.5
    Adapter Name:    {E7CA4853-FF4A-49AE-AA4E-06BB1DEE67D4}
    Description:    Ralink RT5390 802.11b/g/n WiFi Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection was refused.
    Connection attempt to Gracenote server was successful.
    The network connection was refused.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: hp DVD-RAM UJ8B1, Rev H.02
    Drive is empty.

  • I can't access the app store - I get the following messages - error 1004 or 100 or 4 or unknown error - help!!!

    I can't access the app store - I get the following messages - error 1004 or 100 or 4 or unknown error - help!!!
    I've disabled the firewalls, the virus protection, the application protection - nothing helps.

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

  • App store error message "could not sign in" "an unknown error has occurred"

    has anyone else gotten this message when trying to sign into the app store:
    "could not sign in" "an unknown error has occurred"
    i know my password is correct, i signed in on my macbook and on my imac and no issue there.
    i called apple and they coulnd't figure out what it is, i reset my network settings and same thing. of course i can't do a restore because i'm at work and we don't have the new lighting cords here for me to hook up to my imac

    I experienced this problem, too -- and with the help of an Apple support rep, figured out a way out.
    Go into Settings and turn off automatic date and time, and set your phone back a year. Then go back and turn automating date and time back on, to get back to the present. Now go to Settings > iTunes & App Stores, click on your AppleID, and re-enter it and your password. Finally, go back to the App Store (or iTunes Store) and try to download what you had been trying before -- and if you're like me, it will now pop up with a new set of Terms and Conditions for you to approve. After you approve, you'll be able to download whatever you had been trying to.
    It appeared, in my case, that Apple needed to present me with a new Terms & Conditions to approve, but for some reason, iOS 6 and the Apple mother ship weren't communicating correctly about how to do that, and I was stuck with the "Could Not Sign In" message. Changing the iPhone's time and/or re-signing in via Settings > iTunes & App Stores resolved the roadblock for some reason. Hope this works for others as well!

  • Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

    I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
    using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
    My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
    completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
    April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
    server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
    in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
    I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
    My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
    I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

    I just started having the same problem.
    I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
    I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
    I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
    I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
    Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
    I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
    I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
    I proceed to kick off the 100+ downloads needed before i left and left the console up.
    When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
    an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
    I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

  • Imported Error -   The file cannot be imported. Unknown error occured (-50)

    I have the 30G Ipod. It has been freezing several times. I have reset and master reset several times. I used the updater program and restored the software (several times).
    I also reinstalled itunes & ipod software from the cd and updated to the latest version of itunes.
    Now I go to itunes, I see my ipod listed and as before I choose to import the file from my music directory which containes all my mp3 files. After choosing file, import, the error msg comes up saying the file cannot be imported. An unknown error occured (-50).

    OK I'll do a basic explaination on what were about to do. When you use the "Restore" option in the updater, it does a quick format, basicly tagging everything on the drive inside the ipod saying "You can write over me". This is the same as a "Quick FOrmat" in windows.
    Now theres a complete format called a low level or "Deep" format you can do in windows. THis goes thru and writes the whole harddrive in zeros AND maps off bad sectors on the drive or fixes them. this is what you have when the ipod clicks and freezes.
    The steps you do are not that long, BUT the actual format can take hours. Some report gettin done in a hour others it takes 5 hours, so make sure you got the time before going ahead. You can do the steps before bedtime and let it format while you sleep. Make sure the PC is not set to goto sleep or shut off, if on a laptop leave it opened and plugged to its AC adaptor.
    WITHOUT the ipod connected to the PC, hit ctrlaltdel keys to open the task manager. Select the "Process" tab, look for "iPodservice.exe". Highlight it and hit "End Process".
    Now connect the iPod, it should flash the "Do not disconnect" sign and you will see it in windows under "My Computer". Rightclick the ipod in "My Computer" and hit format. UNCHECK quick format and hit start. Now this is the long part, you can stop the process half way thru, but I usually recommend to people to let it completely format to make sure it gets any bad sectors. Again its a long process so just be calm.
    Once its done, reboot the PC so the "iPod service" is started again. When windows is back up YOU MUST run the ipod updater and restore it so the ipod is formatted into the format it needs. Only after this should you let iTunes get ahold of it and start loading it up

  • Error-handling strategy to get a list of errors

    I read about error management and I try now to throw errors in my application when something is wrong.
    At some point, my application checks the state of an object. It must follow some rules, and I want to know if the rules are broken. If I throw an Error as soon as I find something wrong, I won't get all the errors listed but just the first.
    I want to be able to tell the user, "you have to correct this, and that, and that" (like FlashBuilder does when you have compilation errors), not just "correct this and check again, there may be another error".
    In this case, do you think it's possible/preferable to throw Error ? Or just register errors and return false when I found at least one error ?

    Throwing interrupts processing, so you should build up a list of problems.

  • Error Converting "name"... An Unknown error occured (-223).

    I need to know how to fix this problem. When I try to import a cd, or any audio files into my library, i recieve this error message:
    Error occured while converting the file "Name of Song". An Unknown error occurred (-223).
    I've tried reinstalling the iTunes, and I still recieve the same error message as i have before. I have the latest update of iTunes and sometimes when I open iTunes it says it is missing some of the converting files or something like that.
    Can somebody tell me if they've had this problem and if they know how to fix it?
    Thank you very much,
    AfroBo

    Same is here
    Have a MacBook Pro , upgraded to Lion and now cannot download music from CD to ITunes "... An unknown error occurred (-50)".
    Help

  • I keep getting an error message while connecting to the server ("Unknown error") and there is no way to reset preferences on Mac OS X.

    My sync preferences keep disappearing and I keep getting the "Unknown error" error message.

    Hi!
    The sync infrastructure is having some issues and we are working to fix them as soon as possible.
    Check this site for the latest updates: https://services.mozilla.com/status

  • Error message when accessing my shopping cart - "Unknown error... (502)

    I am able to access the Music Store just fine, but when trying to access my shopping cart I get the following error:
    We could not complete your Music Store request. An unknown error occurred (502).
    There was an error in the Music Store. Please try again later.
    I closed and restarted iTunes to no avail. A search of discussions, and support turned up little.
    I bought music just fine a few weeks ago.

    Matthew,
    Where did you see that message? I've been having problems, like everyone else seems to be. When I try to make a purchase, sometimes iTunes tells me my credit card info has expired (it hasn't), that the server cannot be found, or some other problem.
    Thanks.

  • Error(-50) =iPods cannot be updated. Unknown error occured(-50)

    2GB nano. New to iPods. Help... Spent the last 4 days reading, plugging, unplugging into different usb ports on computer, reading some more and emailing Apple support. (Still waiting for a response)
    I downloaded an audiobook from iTunes which is in my library and playlist. I tried to transfer manually from iTunes. Also purchased album from iTunes using my laptop. No problem transferring the album from laptop but constant Unknown errors (-50) when trying from my Dell. It is also new.
    I have tried almost everything I have read about here. What's the secret I am missing?
    I thought maybe because I originally logged into iTunes from laptop but then I read you can authorize up to 5 computers so I authorized both. Now if there is a trick to this, I'm stumped.
    What happened to "User Friendly"? This Christmas Gift may be going back.
    Dell Dimension E520   Windows XP  
    Dell Dimension E520   Windows XP  

    have you tried to close the ipodservice?
    http://discussions.apple.com/thread.jspa?messageID=3358348&#3358348

Maybe you are looking for