Old Airport Extreme software.

Hi All,
I have an old Airport Extreme Base Station which is not compatible with the currect AEBS software so I am looking for software that will support this AEBS. Anyone any ideas where I can obtain this. It is not available on any of the Apple web sites.
Many thanks
Roger

I have an old Airport Extreme Base Station
If by "old", you mean that you have a "round" or dome" shaped AirPort Extreme.....the most recent version of firmware that will work with this product was made available 8+ years ago.
There have been no updates offered for the older AirPort Extreme model since 2006.
That version of firmware.....which you may already have installed on the AirPort.....is version 5.7.
AirPort Extreme Firmware Update 5.7 for Mac OS X - Support - Apple
which is not compatible with the currect AEBS software so I am looking for software that will support this AEBS.
Apple dropped support for the older AirPorts when they introduced the version 6 of AirPort Utility in the Lion operating system a few years ago.
If you have a Mac running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC, you can use AirPort Utility on one of those products to administer the older AirPort Extreme that you have.

Similar Messages

Mountain Lion airport utility can't see my old airport extremes

Hi - grateful for any help - I have two old style airport express that have been working fine. I've now set up a new network with a new router and want to add them to this network. However the airport utility in Mountain Lion can't see either extreme. I've reset one extreme to see if that works but still nothing. The other extreme still shows as a network option through wifi so it is transmitting but nothing through the utility?

I had the same problem, the referenced macworld article worked great. Downloaded the free unpkg app so I could install utility 5.6.
HERE'S my soapbox...I call apple with the problem and they ask if I have an older computer running the old airport utility software. No, that's why I purchases a new apple computer, because my old one finally quit after 7 years. Then basically I'm out of luck and there's nothing they can do for me.
BUT if my airport express is working great, why won't you support a utility program to allow me to configure it? If I can download and install 5.6 with a quick hack-around, and it runs in mountain lion, why didn't you allow me to do that apple?
Unfortunately the only answer I can come to is that apple is trying to get me to upgrade my airport express, despite the fact I have two airport express' which already work fine and just needing a config tweak. And that grates my skin. I pay a premium for apple because it works, because their products typically live longer physically...but to have them try to force me to upgrade my wireless equipment when I just upgraded my computer. This leaves a bad taste in my mouth!

Download Airport Extreme Software for Windows?

I am trying to find the windows software that comes on the CD for an Airport Extreme. (Attempting to help my Mom get her existing Airport Extreme w/ USB drive hooked up to her new windows laptop - the 802.11 connection is fine)
Where the bloody **** is this software!? I've wasted hours on this support site looking for the basic install software. I've found the 5 year old airport admin software and lots of firmware updates. But I just want whatever comes on the CD so my mom will get the system tray icon that allows her to map the USB drive from the airport (the ability to manage the airport wouldn't hurt either).
If you know where it is, please post a link. If apple only releases it on CD (which would be ridiculous) please put up a page that says so on your support site.

Hello treyguinn. Welcome to the Apple Discussions!
Here you go: AirPort Utility Setup 5.3.2 for Windows

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

I need to share a file with sec.(windows based). She uses it all the time. I need to just download updated version every few days. I have an old airport extreme and was hoping to attach an external drive. Will this work?

I need to download an updated version of a file every few days to use. My secretary works on the file all the time. I thought i could use my old airport extreme and attach an external HD and set up a network to do just this. At work we alll use pc's. How can i make this work? At the moment we use usb stick to transfer which is getting to be a bit of a pain as the file grows every week. Presently 5GB.

I thought i could use my old airport extreme and attach an external HD and set up a network to do just this.
Yes, you can use either the 802.11g or 802.11n AirPort Extreme Base Station (AEBS) to attach an external USB HDD for file sharing. Either AEBS model would allow you to share out this HDD to either Macs or PCs. From the PC, the shared HDD would appear as a network drive which you can map via Windows Explorer.

Problems After Updating Airport Extreme Software & Firmware

Lost wireless connection to my printer while attempting printing from either desktop or laptop & when I tried to re-establish/update the wireless settings, I received message that new versions of software & firmware were available for my Airport Extreme. After I downloaded & installed both of these, I could no longer connect at all to the Airport Extreme. When I used the Airport Assistant to try to solve problems, it said airport was out of range. Also only got flashing amber light on Airport Extreme no matter how many times I tried to reset it and DSL modem (went through complete re-connect/re-install of both Airport Extreme and DSL modem hardware). I switched to an extra Airport Express I have and now everything is backing working again. Any known problems with either the latest Airport Extreme software (Airport Utility 5.3.2) or firmware (version 7.3.2 I think)?

Firstly, on the Mac you use to configure the AEB, Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
I see you are using 10.4.11, so the steps in Part B may be a little different (this is for 10.5.x).
Use this procedure to setup your network again:
A. Setup the 'Main' Base Station
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main) - leave off for at least 5 minutes to allow servers to reset.
2. Check that ethernet cables are connected properly:
- DSL Modem > AEB (main) WAN port;
- AEB (main) ethernet port > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP'. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
AirPort Utility 5.6 for Mac OS X Lion

Can I use my old AirPort Extreme to extend my network?

I recently replaced my year-old AirPort Extreme with a Time Capsule. The TC setup was the easiest ever, and it actually asked if it was replacing the AirPort and used the old settings, network name, et al. Had it up and running in five minutes and all computers and devices attached to it without any changes necessary.
So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV. I also have an old AirPort Express which isn't the 'n' model. What to do?

So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV.
Yes, you could use the 802.11n AirPort Extreme Base Station (AEBSn) to extend the wireless range of the new TC. Whether or not, it will be successful, will depend on both at distance you are trying to cover and what form of Wi-Fi obstructions (walls, ceilings, floors, etc.) there are between the two routers.

I replaced an old airport extreme with a new one. None of my wifi devices will connect - always say incorrect password. Reinstalled old device, works fine. Any ideas?

I have a 5 year old airport extreme. I bought a new one to upgrade for better range. I connected the new one to the internet with a few problems, but a phone call to my internet provider resolved them. With an ethernet cable from the new airport extreme to my iMac, I'm connected. However, none of my wifi devices will connect. They see the network, but it either says "incorrect password" if I'm trying a new network name and password, or it repeatedly asks me to reenter the password if I use the old ones. I reinstalled my old airport extreme and everything works fine. I'm about ready to box up the new one and return it. Any ideas?

It is extremely difficult to fix these issues.. remotely.
If none of your wifi devices work.. that does sound unusual..
Have another try.. This time deal with the COMPUTER only.. leave everything else turned off.
Unplug the Extreme from the router.. reset it to factory.. do this full setup.
Unplug power from the Extreme.. hold in the reset button.. plug in the extreme to power and keep holding in the reset.. 10sec or so the front led should flash rapidly.. release the reset and wait a couple of min.
Now in the computer does the Airport extreme show up under wifi as new device??
Please make sure IPv6 is set to link local only to go further but it should work no matter what the settings are.
No luck clear out all the old wireless names from the computer.. reboot the computer and try again to scan for new wireless devices.
Hold the reset and try again.. it must appear in the wifi to be setup.
No sign of it the unit is faulty and can be returned.

If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

I operate an old airport extreme base station 802.11n (3rd gen).
There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
I get a sense that the iphones may/will be useless the new airport.
Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
Thank you.

I get a sense that the iphones may/will be useless the new airport
They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

Safely uninstall Airport Extreme software in order to do a reinstall ?

I've messed up my encryption so although I have connection between my iMac and my Airport Extreme, I cannot connect with the Internet via my cable modem. I've tried various approaches, but I think I could solve it by uninstalling the Airport Extreme software and reinstalling it again-- does this seem feasible? If so, do I simply drag the icons out of Utilities and dump them in Trash?

The state of your wireless encryption is unrelated to the problem of the AEBS(n) being unable to communicate with your cable modem. No need to try to uninstall anything; besides, all you can easily uninstall is the Airport Utility by dragging it to the trash.
Use Airport Utility to check that you have properly configured the AEBS(n) Internet connection. For a cable modem, this is usually like this:
Connect using: Ethernet
Configure IPv4: Using DHCP
Connection sharing: Share a public IP address
What do you see on this panel for your Internet IP Address?
If the settings are OK, then power off both the AEBS and your cable modem for perhaps 10 minutes, then power up the cable modem, finally the AEBS

Can I use an old Airport Extreme as an extender with a new Airport Express

Hi All, I have Verizon Fios and the data line runs into my bedroom. I purchased a new Airport Express today to replace the Airport Extreme (from 2006). Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there). I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible? If so, how do I set it up?

Can I use the old Airport Extreme as an extender
Is this the "round" or "dome" shaped AirPort Extreme?
If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

Is it possible to use the old AirPort Extreme to share disks?

I had bene thinking about possible disk sharing prior to the relaese of the New AirPort Extreme with AirPort Disk and would like to know if it would be possible to do this with the old AirPort Extreme Base Station.
I had thought of attaching storage to my Power Mac to allow others in the house the ability to use that storage, of course it would have to be on. It would be a better solution to have a disk on the LAN that all of the Mac's in the house could use as an extended Home folder.
If this is possible could someone explain how and what disk options would be available and good buys?
Thanks

Using the old AEBS it was possible to access disks over the network, but not via the usb port. The Airport disk is a completely new feature in that it seems to operate via the USB port. Beyond that its hard to advise you as it has yet to be released and there is comparatively little product info on it as yet.

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands, but the problem comes back. Transmitter problem or interference?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). My hard-wired iMac still has internet capability. The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands back and forth, but the problem comes back. How can I check if it is a transmitter problem or interference?

Let me see if I can suggest a strategy.
I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
What modem do you have and what sort of broadband?
What mode is the AE in.. router or bridge?
I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
Is this express or extreme.. the rest of the post you refer to extreme.
What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
Make sure the guest wireless is off.
Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
You should see lists of wireless connection like..
Post as many screenshots of the setup as you can.. it helps loads.
IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

Old Airport Extreme software.

Similar Messages

Maybe you are looking for