Old All-In-One Printing Software

I have lost my old All-In-One HP printing software, due to buying a new computer and new HP printer. Can I get that old software so that I can open my Xmas Card album again?

Hi,
Your new printer should come with a new software called HP Photo Creations. Please use this new software to make Christmas cards, the old software may not work on your new computer. If you can't find it on the CD, please download from the following link:
http://www.hp.com/global/au/en/consumer/digital_photography/free/software/photo-creations.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How do I uninstall my Canon all-in-one printer software?

How do I uninstall my Canon all-in-one printer software? I followed the online HELP instructions of moving the apps to TRASH. But I still had lots of files, and one app, that I could not get rid of.

Huh! How simple can it be?
Thank you, very much. I still have a few Canon files and one app remaining. I'll send them to the trash. But, the really annoying scanner icon on the bar at the top of the screen is gone.
Thanks, again.
Dave

Installing HP Photosmart 7520 all in one printer software

My new HP Photosmart 7520 will not install on my Dell PC. I have the 32-bit Windows Vista OS. When installation begins I immediately get the error message: "Key not valid for use in specified state". I've tried installing the CD and the software from HP on-line, all several different ways. I 've used the troubleshooting download from HP but both methods do not solve the installation problem. I've temporarily disabled the firewall. I've done disk clean-up and defragmenting. I've restarted the PC more than a dozen times during my efforts. Even Microsoft Windows can't install all the software from updates - only the fax portion. If I can get past the point where the error message occurs I think the software will install.
I hesitate to try the Geek Squad. My experience with them is that most of the geeks aren't competent and it's a crap shoot getting assigned one that is. They will be my last resort.
Has anyone had this problem? Does anyone have a solution?

Hey @jimlg ,
Welcome to the HP Forums!
I understand you're unable to install the printer drivers for your Photosmart 7520 printer.
The error you have listed is a Windows error and not attributed to the printer software. You can confirm this with the fact the error occurs when trying to install from Windows update bypassing our installer.
You may want to try following the suggestion in this thread made by @Gemini02 which seems to help resolve the issue for some users experiencing the same problem: Re: key not valid for use in specified state.
Let me know if that helps.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Lj cm1415 All-in-One printer software will not install in Windows XP

Have windowsxp and no problem with my printer and scanner, lj cm1415fnw, then the scanner stopped working.
my IT guy uninstalled and now we can't install. Error message, does not support this windows software?
It did before, Help please
thanks Terry

Hi Terry,
Try installing the latest drivers below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-85658-7&cc=us&dlc=en&lc=en&...
As well ensure you have full administration rights to install the software, a such may appear due to insufficient permissions of your user account.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 7510 all in one printer driver problem

Trying to reload HPPhotosmart 7510 series all in one printer software. Have CD/downloaded newsest version from HP.com, have uninstalled all versions etc....have downloaded hppiw /hp prin and scan doctor when running HP doctor indicates two 7510 series (Net) and not net.....just the IP/MAC information as listed on the printer. However when trying to load the software it uses the non-net IP address...it can identifies the IP address for the printer, when using older printer software it works wireless and prints .,....however when trying to load software automatically get error message "unsuccessful network installaion" the prinert was unable to be installed over the network...tried with printer cable, it would not accept.....looking at the Device Manager, Other devices 5 listings of HP Photosmart 7510 series (1 has exclamation point 4 have question mark icon, within the properties of each inidcates that "the drivers dfor this device are not installed)...attempted to uninstall each to no avail..have 6 listings of Photosmart 7510 series all with the exclamation icon and same properties....not installed. same situtation tried to uninstall, to no avail.......have tried other suggestions which were listed on forum to no resolution....any suggestions greatly appreciated..thanks

Hello etrout17,
Welcome to the HP Support Forums!
I see you are having some install issues with the HP Photosmart 7510, it shows multiple printers in the installers and even more in the Device Manager. What version of Windows is installed on the computer?
Have you been able to add the printer from the Devices and Printers? This of coarse is not a fix for the issue but my allow you to get some printing done.
I will research the issue more and wait for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Installing software for my HP psc 1210 all-in-one printer on to my Mac?

I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with the scanner function. I don't think that the HP software is registering that there is a printer present. When I go into the HP setup assistant no printer comes up in the selection window. When I go into Printer & Fax via system preferences the HP psc 1210 series comes up as the default printer. I've had this problems before but cannot remember how I rectified it. I'm sure it got something to do with erasing the driver's off the computer and starting over again. Can anyone please help me or point me in the right direction. Thanks

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
If so, please tell me how to do that? Thanks!

Hi,
I afraid not.
The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
http://support.hp.com/us-en/document/c04353671/
If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
https://www.apple.com/osx/how-to-upgrade/?
The other option os to replace the printer with another model which is compatible with your operating system.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

MacBook pro and airport extreme router. How to print wirelessly to an old HP wireless photosmart all in one printer

With MacBook pro and airport extreme router, how can I print wirelessly to an old HP wireless photosmart all in one printer? What is needed or what process?

You need to make sure that the HP has an updated printer driver that works with 10.6 for that printer. You can check here:
http://www8.hp.com/us/en/support-drivers.html

XP software disc does not work on 8.1 HP PSC 2355v All in One Printer

Please excuse my novice actions in the subject description as I put my problem and request there. Basically: My XP software Disc will not work on my Windows 8.1 computer for my HP PSC 2355v All In One Printer. Needless to say I can print with a downloaded driver but can not use the Managerial software on the XP disc. When I try to work from the printer it does not recognize the computer, so is there HP software out there that can be downloaded simply to my computer? If so, Where and How can I get it. Thanks again.

Hi,
Unfortunately no more support after Vista but you can use basic function of the printer using the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N135752
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer

Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer.

phantom3 wrote:
Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer.
Hi,
Well, your printer simply won't print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't Install C5200 All-in-One Printer Full Feature Software- Runtime error Prevents Installation

I am running Windows 7 64-bit and I am unable to install the HP Photosmart C5200 All-in-One Printer series Full Feature Software that I downloaded from the website.
After extraction, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: c:\Users\MyUsername~1\AppData\Local\Temp\7zS7526\Setop.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information
Can anyone help me solve this problem?
The actual printer and all associated drivers are installed and working correctly.

Hey cmsciulli,
I would first like to welcome you to the HP Support Forums!
When getting the Microsoft Visual C++ Runtime error message. The first step that I would suggest doing, is to make sure that you do have the latest update. I have included a link to the latest available download from Microsoft for 'Visual C++ Redistributable for Visual Studio 2012 Update 4'. Along with this update, I would also suggest completing any other Windows updates that are available to you.
After you have installed all the necessary updates, I would suggest restarting your computer, if you have not already. Then try installing the printer software again.
If you are still experiencing the same error message when trying to install the printer, please let me know the version of Windows that you are currently running. If you need assistance in finding the version, I have included the document 'Which Windows operating system am I running?'.
Looking forward to your reply!
I worked on behalf of HP

Old All-In-One Printing Software

Similar Messages

Maybe you are looking for