Old Apple xserve Raid 1.24 and New Intel Xserve

Guys
Quick question - i currently have an Apple G5 xserve setup with an apple xserve raid {1.24} as a file sharing server in my studio
ideally i am looking to get my xserve upgraded to the new intel version but would like to know if the old xserve raid would still be compatible with the new xserve?
any info would be super appreciated!
so7

Yes - it will work just fine. The only issue is that you'll need a new Fiber channel card for the Intel XServe since it only supports PCIe cards, not PCI-X used by the previous XServes.

Similar Messages

I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but I do not want to delete/lose their data

I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but since the old one was deactivated I cant update them and I do not want to delete/lose their data, re download, and start all over again. Is there anyway to go around this issue?
thanks

Ask Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.

My old apple id account was deactivated and i now have a new apple id but i cannot sign into icloud -- how do i handle?

my old apple id account was deactivated and i now have a new apple id but i cannot sign into icloud -- how do i handle?

Try contacting Apple for assistance resetting the password by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

Moving Public from G4 XServe to new Intel XServe and preserve permissions

We have purchased a new Intel XServe (10.4.8) and need to move the Public folder and Users folder from our old XServe G4 (10.3.9) to the new one, and would like to preserve the permissions.
Both of these are OD replicas; there is an XServe G5 (10.3.9) which is the OD Master.
Apple Tech support tells me it is not possible.
I have tried ditto, tar, scp, and a Finder copy to an external FireWire drive. None of these attempts have successfully preserved the permissions.
tar cf - * | (cd /target; tar xfp -)
ditto -rsrc /oldpath /newpath
I have searched the archives, but not found any answers.

Thank you for the link - I will try Dan's tar syntax tomorrow (and hope there are no differences with 10.3.9).
/usr/bin/tar -cvf - xyzzy | /usr/bin/tar -C target -xvf -
I also like his hint about handling remote files.

I have an app that am trying to download an update...But my old apple id keeps coming up and is no longer active and it asks for the password to proceed for the update. how do i change this to my current apple id?

I have an old app game that am trying to update, but my old apple id keep coming up and i no longer use that id . how do i change that id so i can update this app? Is it because that app was purchased under that old id?

Apps will always be tied to the account from which it is purchased and will always have to updated suing that account.

HT204053 An old Apple ID keeps popping up and asking for password; how do I get rid of it?

An old Apple ID keeps popping up and asking for password; how do I get rid of it?

Here is what I did to fix it on Win 7 64-bit system:
Computer > C: > Program Files
Delete the Oberon Games File
If you have a Program Files (x86), delete it there, too.
Reboot.

New intel Xserve with Leopard Server setup assistance....

Hello
Im quite a newbie when it comes to administrating OS X Server, Xserves and RAID's so please bare with me if the following question seems obvious or dumb...
Currently I have inherited the following setup - G5 Xserve running 10.4.10 Server which has the following services running = Kerio MailServer, AFP, DHCP, DNS, Firewall, NAT, OD, VPN and Windows. This Xserve is also connected to an Apple RAID via fibre channel for file sharing and also to a Tape multi-changer backup unit via scsi.
I have just bought a new Intel Xserve and have installed 10.5 Server on it. I have this server as I would like to get iCal Server and Directory up and running and eventually share some of the G5 services. For iCal Server and Directory I assume ill need the 10.5 Server set up as Open Directory Master but my worry is I have that already on my G5 Xserve. If I was to migrate the 25 usernames from there to the 10.5 Server, would every user still be able to connect to the RAID (as the RAID is still physically connected to the G5 Xserve) for file sharing?
I hope some one could advise or recommend a better way, let me know if you need me to try and clarify the question better!
Thanks in advance

Hello
Im quite a newbie when it comes to administrating OS X Server, Xserves and RAID's so please bare with me if the following question seems obvious or dumb...
Currently I have inherited the following setup - G5 Xserve running 10.4.10 Server which has the following services running = Kerio MailServer, AFP, DHCP, DNS, Firewall, NAT, OD, VPN and Windows. This Xserve is also connected to an Apple RAID via fibre channel for file sharing and also to a Tape multi-changer backup unit via scsi.
I have just bought a new Intel Xserve and have installed 10.5 Server on it. I have this server as I would like to get iCal Server and Directory up and running and eventually share some of the G5 services. For iCal Server and Directory I assume ill need the 10.5 Server set up as Open Directory Master but my worry is I have that already on my G5 Xserve. If I was to migrate the 25 usernames from there to the 10.5 Server, would every user still be able to connect to the RAID (as the RAID is still physically connected to the G5 Xserve) for file sharing?
I hope some one could advise or recommend a better way, let me know if you need me to try and clarify the question better!
Thanks in advance

Resolve the Ethernet Port Issue of New Intel Xserve

Hi all,
I want to get Clarify the Issues in new Intel Xserve 2.26GHz Quad-Core Xeon "Nehalem" processor. The Network Connectivity of Ethernet is Shows Wrong in System Preference. If I Connect the Ehternet in Port 1, the Port 2 also Shows Connected without Pluging the Ethernet Cable in Port 2.
Port 2 is Shows Green When No Connectivity of Port1 and Port2.
I Tried in 3 Xserves with the above Configuration, all the Server Gives the same Issue. I even Formatted and Reinstalled with all the updates but the Problem prolong.
Awaiting your replies/suggestions.
Thanks
R.ELANGOVAN

Call Apple Support for assistance; this looks to be a nasty error with multiple new Xserve boxes and given these are likely covered under their initial warranty, which implies there's something seriously weird with 10.5.6 or 10.5.7, or with the Xserve early 2009 boxes, or firmware, or with what the configuration tools allow.
It appears that [threadID=2021235|http://discussions.apple.com/thread.jspa?threadID=2021235] and [threadID=2021817|http://discussions.apple.com/thread.jspa?threadID=2021817&tst art=0] are the same case?

Bootcamp on new Intel XServe

Does anyone know if it's possible to run bootcamp on the new Intel XServe machines?
Boot Camp Assistant tells me I need to upgrade the firmware on the XServe before proceeding, but I cannot find this for the new XServes.
Does anyone know if this is possible?
I am trying to install Fedora Core 6 using bootcamp.
Regards,
Trevor.
XServe (Intel) Mac OS X (10.4.8)

>Well, hwmond won't be running, so the fans won't be controlled
Are you sure about that? hwmond simply logs the hardware status and sends emails if there's a problem. There's nothing in the man page that hints that hwmond is responsible for adjusting the fan speeds. Althouth I don't know for sure, I'd expect that there's firmware-level control of fan speeds based on temperature sensor inputs, not OS-level control.
> it's unclear whether all the ECC handling will be done
ECC would be handled by the (hardware) memory controller, not by the OS.
There might be no mechanism to check the state of the ECC (e.g. count errors), but I'd still expect to get the benefits.
> and power supply failover (if you've got the dual supplies) won't work
Again, I'd expect this to be handled by the firmware, not by the OS. hwmond is probably responsible for detecting the failure and reporting it (e.g. via Server Monitor and/or email), but I would still expect the basic power load balancing and redundancy to work - you'd may just need to periodically check the LEDs on the back to check PSU state.
Note, I'm not saying Boot Camp will work, or that it won't work, just that I don't expect these hardware-level features to be affected.

New Intel Xserve crashing.

Hi
My College bought a new Intel Xserve last month.
I have set it up and configured all the iMacs in the art department to access it and created user accounts for all the students. The server has been happily working for around three weeks now, however over the last two days the server has locked up twice. Users can't authenticate and I cant us ARD to remote control it. If I go to the server room and physically control the server I can use the mouse but all input doesn't seem to register. For example if I try and click on Server Admin the app doesn't launch, I can click on force quit and get the same results, if I press applealtescape force quit doesn't appear.
Has anyone else experienced these kinds of problems with their Xserve or could give any indication of what the problem might be? I can provide dumps of any server log you request.
Thanks
Phil

This sound like it could be related to the networking hardware. Any chance that you have a defective switch or router?

How can I change my old Apple ID? I have a new one created but can't deleted the old one it's gray and u can't tap on it?

I'm able to use the new one even tho the old one is there? But can't delete the old one because it's frayed out n can't tap on it to change it to the new one

You will need to use that old Apple ID and password to update any apps you purchased using that account. So you will either need to recover that Apple ID, which if you forgot the password you should be able to reset here:
http://iforgot.apple.com
or you will need to delete all those apps and repurchase them using your current Apple ID.
Regards.

How to log out of my OLD apple ID on my 4s and use my new one?

When updating my iPhone 4s to the new ios7, my imessage stopped working as many others did. I finally got that fixed and as soon as that was fixed.. NOW my old apple id keeps popping up instead of my new one. I made my old one 5 years ago when i first got my macbook. How do I log out and stop using my old apple id?

To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you have to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your phone, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have an old apple id that conflicts with my newer apple id, and when I try to update apps. sometimes the old apple id pops up and wants the password. I don't know password

How do I delete an old Apple ID without losing the itunes music and apps I downloaded with it? I want all my itunes music and apps. under my new Apple ID. How do you consolidate old and new itunes and apps on a new iphone?

I have the same problem and signing out in settings doesn't seem to work. Somewhere, the old id is "hard coded" in the ipad because I used it when I purchased the app, I guess. The only thing that has worked for me is to delete the app and get it again with my current id - great for the free ones, not so great for the ones I paid for.

HT1918 I have changed my new apple email address at the itunes store but when I try to buy an app on my iPad my old apple id (email) comes up and will not recognize the password. How do I change this? I tried going in through settings/tapping apple ID to

I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
Jaylsworth

How did you fix this??

HT204053 Can I merge my old apple id aol email to my new apple id (me) email..

Hi,
I have an old apple id setup with my aol email, account that I had since my first generation Iphone to make purchases online on apple, so I have all my iphone, Ipad, Mac apple store, Itunes match with this account, then I created a new one when apple lunch mobilme, in that one I have 25 gb of Icloud, I would like to replace my old account aol into my new me account to make my live easier, is it possible, can anyone help,
Thanks,
Paul

There isn't a way to transfer your existing AOL emails to your iCloud email account without opening each one and emailing them to your iCloud email address. However, you can stop accumulating addiional email in your AOL account by going to your email preferences for your account on the AOL website and set up your account to forward all incoming email to your iCloud account. (I assume AOL allows you to set up email forwarding as it is a fairly standard feature with most email providers.)

Old Apple xserve Raid 1.24 and New Intel Xserve

Similar Messages

Maybe you are looking for