Old Behance profile failed to merge with new CC account.

I recently attempted to login to my old Behance account, and was prompted to login via my adobe account (which I assume was the same email as the older behance profile). It seems to not have merged the two accounts; how do I pull the profile from https://www.behance.net/messier?

Hello - sounds like you were logging in with the wrong Adobe ID - I've just sent you a private message letting you know the correct Adobe ID to be logging in with!

Similar Messages

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive?
Or should I transfer them to Lightroom?

That's really a personal preference. Support for Aperture is coming to an
end and you may find yourself unable to get to theses photos in the future
in the case of a HDD crash if you can't get the software to reinstall.
Faced with that prospect, I would probably put it on my list of things to
do when I am feeling really bored and looking for something to amuse myself
with. You can export your Aperture photos in their original format to a
folder on your desktop and then import them into Lightroom. Use the copy
option on the import to save the photos in a new folder within your
Lightroom catalog.

HT1848 MY wife has an Iphone 4 and I have a 5. To date we haev used one apple is/account to manage music purchases. Recently we bought a Mac and created a new apple account for her. How do I synched her phone with new apple account?

MY wife has an Iphone 4 and I have a 5. To date we have used one apple account to manage music purchases/library. I updated ny phone to the new OS version and all her texting is showing up on my phone. I understand if i create an apple account for her I will not see her texts. Recently we bought a Mac and created a new apple account for her. How do I synched her phone with new apple account and get access to the music library under my account on the new MAC laptop before I update her phone to the new OS?
Going forward if I purchase music under my apple id and want her to have it on her device, how can I acheive that?

You can continue to share an Apple ID for purchases.
Sign her in to her new account here:
Settings > iCloud > Delete Account (Keep on Phone if you want to transfer contacts, calendars, etc...) then sign in with her new ID
Settings > Messages > Send & Receive > Apple ID > Sign out then in with new
Settings > FaceTime > Apple ID > Sign out then in with new
Use the same Apple ID here:
Settings > iTunes & App Stores > Apple ID

Changed apple ID BUT i cloud not merging with new ID..still on the previous one

i have changed my Apple ID but my I Cloud has not merged with the new ID and is still on the previous ID and there is no option to try and change it ??

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Z68A-GD65 (G3) fails to boot with new Gigabyte Radeon HD 7950 OC

Hi,
I have a problem with my new Gigabyte AMD Radeon HD 7950 (GV-R795WF3-3GD):
My system fails to boot with this GPU, with the old Radeon HD 4850 everything works fine.
Here are my system specs:
MSI Z68A-GD65 (G3)
CPU: Intel Core i5-2500K
RAM: 8Gb DDR3-RAM (Corsair)
power supply: be quiet! Pure Power L7 530W
What I have already tried to fix the problem:
-CMOS Reset
-other PCI-e slot
-other power supply (old 750W)
Nothing worked.
Do I need a Bios update? My current version is V23.7, but I'm not sure whether I can use the latest versions because my CPU is a SandyBridge...

We can't help you woth your vga as it is no MSI product. You can try latest bios for your board (http://www.msi.com/product/mb/Z68A-GD65--G3-.html#/?div=BIOS) because the latest bios versions for G3 boards are working well with Sandy and Ivy. If latest bios should not help and you like to downgrade the bios we can give you the needed files if you ask here.

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

Transferring old email from old comcast account to new email with new comcast account

i moved and was told that i needed to go online to associate my emails from my old comcast account to my new comcast account. how do i do this? i was told i had 90 days to keep my current email addresses

It sounds like you were given some bad information. What happens when you cancel service at an address is that the User ID/email address is suspended for 90 days. After that it is released back into the pool of available IDs for any other customer who wants it. You should have set up a transfer of the old ID to the new service address before you moved. However, you can call Comcast security and see if they can retrieve the ID and the emails for you------------------------------
Comcast Customer Security Assurance-------------------
Normal business hours (6:00 am to 2:00 am EST, 7 days a week)
1 - 888-565-4329

IOS 5.0 and iPhone along with "new user account"

I do hate this hacking aspect of all software, but with iTunes especially.
Earlier I tried to remove some duplicates in the iTunes on my old computer, but time after time they popped back from the trash can, what the heck!
There was a running computer with my iTunes account and everything was fine. Later I even made a restore to new phone after previous phone got lost.
Then I had to buy new laptop to replace the old as it got broken.
As instructed, I installed iTunes onto the new computer and was able to connect my Apple Store account and purchased Apps.
Then after I copied everything in the Apple Computer - folders and iTunes in my old (same user account name) to the new computer, now running with Windows 7 (former laptop had XP).
Now my iPhone 4 (iOS 5.0) does not sync.
Sync failed to start...
Also I wonder what is the reason not to be able to sync back from the handheld? Nokia has that and it really works. When I have new contacts and restore from backup I loose my contacts, since there is no sync file on the new computer. Why the system does not work automatically and sync back from the phone, if no source files found on the computer? The back sync coud be asked every time new phone or ipod/pad is connected.
Im starting to be absolutely fed up with this constant browsing through discussions forums and what ever hacking pages to get things running that I'm just about to throw the device into the lake next to my house. AAARGH!
Why do we even accept this? Who would buy or use a car, that had to be repaired or re-booted every 10 miles?
Great jobs!
Change over was, is from Samsung NC20 (WinXP) to HP Probook 5330m (Winows 7)

Update your XCode to 4.3.2
Your question should be in developer forum
Developer Forums

ITunes does not launch with new User Account (Vista)

One of my limited user accounts on Windows Vista because corrupt, so I created a new limited User Account and copied ALL of the files from the old to new.
Now, when I try to launch itunes on the new user account, it will not open at all. Itunes works on my administrative account, with no problem.
Can someone tell me the most pain-free way to resolve this issue. And, whatever solution, will I be at risk of losing my itunes libraries?
Thank you in advance.

Hiya. Delayed again. Browsers being cranky. (I blame the aftershocks.)
It's actually plausible that it was installed in there (by doing a run as administrator on the installer itunes64setup.exe, perhaps). Because that suggests a possible cause for these continual permissions-related problems.
A lot of what you're seeing is consistent with damaged ACLs (access control lists) on files, folders and registry keys. Although it's a lot rarer than it used to be, one of the ways you could get borked ACLs was if a program (like iTunes or QuickTime) was installed in one user account, and then the user account it had been installed in was deleted (or otherwise rendered unusable).
We don't know which particular permissions are stuffed up here. But there's a shotgun approach to fixing them which used to work okay, although it's a bit fiddlier to do on a 64-bit system than a 32-bit system.
I'd strongly recommend setting up a system restore point prior to doing this, so you can revert if things turn to custard.
The basic technique you follow is from the following blog entry *with one important modification.*
[Solving setup errors by using the SubInACL tool to repair file and registry permissions|http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-e rrors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx]
The modification is that when you're editing the file to replace YOURUSERNAME with the name of the account, edit the first line so that %ProgramFiles% instead says %ProgramFiles(x86)% and after the line that reads:
*subinacl /subdirectories %programfiles%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
... add another line saying:
*subinacl /subdirectories %programfiles(x86)%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
(The first is to make sure the commands see the subinacl, because it installs in \Program Files (x86)\ on 64-bit systems, and the second alteration is to make sure that the permissions for the 32-bit program files are fixed too.
After doing that (it'll take a while to run), can itunes launch normally in the new account?

Using existing ProSite with new CC account

I currently have a Behance ProSite that I pay for separately each month. I am thinking of purchasing a full membership to Creative Cloud and see that a ProSite is included in the membership.
Can I use my existing ProSite with my new CC account?
If so, what happens to my current monthly payments that I'm making to Behance?
Would like to have this question resolved before I buy my CC membership as my ProSite is my company's main website, so I can't lose it or have it effected in anyway by signing up to CC.

Hello,
"Can I use my existing ProSite with my new CC account?" - yes you can! You'll just need to make sure that your ProSIte account is associated with the email address that you used to pay for Creative Cloud (if it's not, you can switch which Adobe ID you're associated with here: https://www.behance.net/portfolio/promote
"If so, what happens to my current monthly payments that I'm making to Behance?" - you will not be charged again. (You can always email us at help.behance.com to make sure)
Thanks!

Trouble with CS2 on Mac G5 with new user accounts - activation issues?

My system is a Mac G5 Quad running OS 10.5.8, and I have the CS2 premium suite. When I bought the machine I did everything under one user account. Several months ago the account started giving me a few problems, and my circumstances changed, so it made sense to create new, separate user accounts on my Mac for work and personal use.
Recently I offered to help a friend out with some design work and tried to start InDesign CS2 from my new business account. I was immediately presented with a demand for a serial number. I looked it up and entered it. An error popped up that said
"Invalid Serial Number
The serial number you provided is not valid.
Please check your serial number and re-enter it."
I tried a couple more times, making sure I had it right. No success.
I gave up and launched my original user account, launched InDesign and started the project. I set the document up and tried to save it. InDesign displayed an error stating "Cannot save "Untitled-1" under a new name. The file "DBTmp[bunch of numbers]" is damaged (error code:0" Each time I relaunched and tried again the temp filename was different.
So now I suddenly am without one of my primary tools and have no idea how to get it back. I am guessing this is a problem with the activation mechanism, but can't find many resources on this topic. It would appear that my attempt to launch InDesign from my new account triggered a piracy protection code or something.
I am typing this while waiting on hold for Adobe support. 25 minutes and counting...
Thanks.
Paul

Bob, Thank you so much!
I already have Acrobat 8.2.4, so I didn't start installing 8.2.2. However, I started working through solution 2 and discovered my new business user account was denied access to /Library/ApplicationSupport/Adobe/TypeSpt/Unicode/Mappings/. I changed the permissions on that directory to give my account read access, and InDesign fired up like normal. I didn't even need to replace the files.
Thanks again for the assistance.
It's interesting to learn CS2 is not supported in my OS version. It works fine (until this).
Paul

HT3309 Share mail settings with new user account on the same mac?

I have had to set-up a new user account on my mbp to use a new piece of software which refused to work on the main user account. I want to transfer the mail settings from the original one simply so that mail opens in an identical way whichever account I'm siging in with.

jonnyukbravo wrote:
I want to transfer the mail settings from the original one simply so that mail opens in an identical way whichever account I'm siging in with.
Oops.
If you just need Mail settings, only copy
~/Library/Preferences/com.apple.mail.plist
All the messages are in
~/Library/Mail

New laptop set up with new itunes account, need to change it.

I purchased a new macbook pro for my daughter. Up to now we shared an itunes account, the associate helping us convinced us to set up her new laptop with a new itunes account. The associate made it seem like it would be easy to transfer the music from one account to another. I'm now finding out that is not the case. Is there a way to change how her computer is set up? I'm thinking if we set up my itunes account on her computer she will be able to access her music.

Locate the song files in the Finder, move them to the USB drive, take the USB drive to the new computer, drag the files to the internal drive, and from there into the open iTunes application window.
(81049)

OS Lion - Difference image quality in EyeTV with new user account?

Hi Everyone,
My computer has been crashing ever since installing Lion, mainly on the Mail app it appears, so I created a new user account and have set that up to use.
I have an Elgato Eye TV Hybrid with EyeTv for watching TV. The image settings are the same on both user accounts, but the new user account is extremely grainy. Any ideas about why it would be different on multiple accounts?

pod meister,
quite as yr office person says. It would be wrong to remove all the apps. I would not be sure what ElGato can mean when they say the test user has no apps!. Elgato (?) will need to use some apps for it's normal operation, and the more general user functions will as well. You would msee in yr 'Parentalo controls, in sys prefs pane that there are 'helper apps' that you can allow or not to any controlled user. So there are helper apps.
You can 'turn off' lots of system extensions with a special boot up but won't Elgato need some of them? It is after all the operation of Elgato that you want to test.
The usual dodgy 'apps' are starup items like so called haxies which moderate certain basic system operations. You could start by disabling the.
You might care to consider that Elagto is shoveling the blame onto 'the rest of the world' saying it 'is something else',but I may be wrong.

Old Behance profile failed to merge with new CC account.

Similar Messages

Maybe you are looking for