Old bug returns - error message: problem with play...

This results in there being no sound on my computer at all. Have tried all fixes listed previously. What to do next? and why don't the skype people iron out this bug?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

Similar Messages

  • Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    This has been fixed.  Answer is that I needed to go to "Apple Software Update" and repair it.  (From my Control Panel).

  • Qosmio G20 error message: problem with cooling system has been detected

    I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
    The error message is: Warning: A problem with the cooling system has been detected.
    I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
    When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
    I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
    I would be grateful if someone could advise whether the problem is the fan or something else.
    If the fan is the problem, where can I buy one from (I live in the UK)?

    Hi
    In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
    Usually this should be done by an authorized service provider (ASP) in your country.
    The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
    Therefore contact the ASP in your country and ask for the further handling!!!
    By the way; you can purchase the cooling module also from the ASP!!!
    Good luck

  • Trouble with itunes upgrade I receive an error message problem with windows installer package

    I am trying to upgrade itunes.  I am running windows vista 64.  Everytime I try to upgrade I get an error that says Problem with windows installer package.  Anyone know how to fix this?

    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Media file error message trying to play files from WDMycloud on ipad

    I am using a WDMyCloud networked hard drive to provide cloud backup for my Windows PCs. This backup includes my Itunes music library
    Using the WDMyCloud app on my iPad(or iPhone) I can see the library is succesfully backed up onto WDMy Cloud and can see all expected songs listed.
    Unfortunately when I try to open some of them on my iPad or iPhone using the WDMyCloud app I get an error message "Unable to play this media file". Some files do open OK
    File formats are mostly .m4a or otherise .mp3 and I have experience of problems with both types of files.
    I used to be able to play all WDMyCloud stored media files without any problem on my iPad/iPhone devices, and I am not aware of changing anything in iTunes/WDMyCloud or my Apple devices other than ensuring I keep up with the latest released software/version.
    Interestingly, I copied a couple of files that would not play into Dropbox onto my PC. I then looked for them on my iPad and iPhone usingWDMycloud app and looked into synced Dropbox folder in WDmy Cloud and found the files and hey presto they play OK.
    They also play on my iPad and iPhone if I go direct to the Dropbox app itself.
    Finally,I can also access my WDmyCloud via my Samsungsmart TV since it is on the same home network and and the "problem"  files will play OK on the TV.
    With my limited technical knowledge, its not clear that there is any difference between the files that play and those that don't.
    Grateful for any advice on what I might be able to do to fix it so all my files will play
    Many thanks

    I see. I understand Cisco just recently released this model in the market so probably there would be more tests to be done for further isolation and come up with a fix solution if proven to be really an issue. I guess for now we'll stand by for updates and just make the best out of Cisco's one of the top of the line routers.

  • After upgrading to Lion the bookmarks in Preview returns error message.

    After upgrading to Lion the bookmarks in Preview returns error message : The File "****" couldn't be opened because you don't have permission to view it. To change the perimssion, select the item in finder and Choose File info.  I have bookmarked plenty of files in Preview.  How to overcome this error message???

    Doesn't work Steve. I think it is an issue with Preview being sandboxed (check the sandbox column in Activity Monitor: Preview = Yes). Sandboxed apps restrict file access to those the user has explicitly selected. My theory is that this causes the unfortunate side effect of bookmarked or linked PDFs not working. A simple test: open a file with bookmarks, manually open the bookmarked file and then select the bookmark in the first file - it should open with no complaints about permissions (which leads to a weak workaround: open all the PDFs you intend to work with!).

  • When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

    When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
    When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
    When I click "Agree",  It is disabled.
    Can anyone tell me why this has happened and how to resolve it?
    Please, please, please help.

    Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
    This Apple ID has not yet been used with iTunes.
    I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
    Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
    Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

  • HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

    Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
    Would appreciate help...its driving me up the wall!!

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • AuditActivityReport  returned error message

    Hi!
    i'd like to get Audit Activity Report, but return error message "An error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for data set 'ActivityData'. (rsErrorExecutingCommand)
    For more information about this error navigate to the report server on the local server machine, or enable remote errors "
    this problem in BPC 5.1 MS, SQL 2003
    thanks
    Arai

    thanks
    i solved this problem. mistake was in string connection for OsoftDataAudit

  • Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"

    Hi Friends,
    I got the following message when am trying to delete the setup tables.
    " Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
    Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
    Please can anyone provide a solution.
    system detials:
    R/3 release    - 4.6c
    PI                 - 2004_1_46c
    SAP_BW      - 30B
    PI_BASIS     - 2003_1_620
    Any information will be appreciated
    Thanks,
    VBR

    Hi Kishor,
    Thanks for your reply.
    I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
    Can you send your email id so that i can forward the error screenshots.
    Regards,
    VBR

  • I am not able to open iCloud from pc, error is "problem with the server". what should I do?

    I am not able to open iCloud from pc, error is "problem with the server". what should I do?

    Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.  You will then be able to access Settings>iCloud again.

  • I have problem with playing stream  fullscreen. it goes black but with sound

    i have problem with playing stream fullscreen. it goes black but with sound. i have to wait 10-15 minutes then i can press fullscreen. what to do?
    s

    Thanks!! but i been fixing now for 10 minute ago by restart my macbook pro. My case is it show normal with Intenal-speakers and nothing mark with red light or mult so i tried to restart that it working again

  • Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

    Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

    You would need to have burned the disc using iDVD or a third-party application such as Toast. Is that what you did?

  • Error out problems with measuring frequency VI

    I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
    Attachments:
    Measure Frequency VI error.vi ‏27 KB

    This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
    Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
    Hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Problems with playing songs in iTunes

    as the subject says. I have som problems with playing songs. not everyone just a some..
    If we take for example that a song is 8min. then at 1.40 it just stops and goes to the next one. I can jump over it with pressing in the middle for example. it plays. as normal. UNTIL. 3 mins. then the same problems appear. I don't really understand how. just between 1.40-1.50 iTunes thinks that the song is finished. I know my english isn't so good but cuz there is no swedish support. I have to write here. any answers would be good

    I'm having a similar problem.
    Every now and then, a track from a ripped CD or from iTunes or from eMusic will "look" OK in iTunes (or on my iPod), but when the track plays, it gets partially through and it jumps to the next track in the playlist.
    For example, if playback of track 1 pauses and jumps to track 2 at 1:30 into playback of track 1, & I click on 1:31 or later in track 1, the rest of track 1 will play fine. But if the playback of track 1 starts at the before the "skip point," the track will stop & iTunes (or iPod) goes on to the next track in the playlist. If I locate the file (on my external drive) and play it in the finder, there's always buzzing sound at the point where the iTunes jumps to the next track.
    For ripped CD's this is not a huge deal, I just re-rip & usually all is well. With eMusic, I can download again, but with iTunes, I have to file a complaint & so far they've just credited my account, which is OK, but time consuming.
    At first I thought the problem was with my optical drive, but then the problem started happening with downloads from iTunes and eMusic as well. NONE of these shenanigans happened before I upgraded to iTunes 7.6, so I'm wondering if that's where the problem is. One thing's for sure: I'm not going to "jump" at the next upgrade of iTunes!
    I'm totally stumped & bummed. iTunes used to be a really good friend, now I find myself wondering if I should bother with putting my entire CD collection on iTunes if it's no longer as reliable as it used to be.

Maybe you are looking for

  • NULL value in LOV not displaying in Viewer as NULL

    Discoverer Viewer: 10.1.2.54.25 CP4 I have a list of values ('A','B','C',NULL). In desktop the drop down shows A B C NULL However in viewer I get A B C When I select the area just under C, which I presume to be NULL, it allows me to move it over. How

  • Execute a script on a remote machine - possible?

    I am sorry if this sounds silly - what I would like to know is if its possible for a java program executing on one machine to execute a shell script that resides on another machine. That script in turn invokes a java program which does some other stu

  • Not able to approve SRM PO items through UWL

    Hi All, We have an issue in approving SRM Purchase Order (PO) Items through Portal UWL.  We can approve SRM Contracts & Bid Invitations thru UWL, no issues with them. On click of the link to Contracts/Bid Invitations in the item detail section opens

  • Performance Appraisal - Transports

    Hello Experts! I am wondering about best practices involved in building performance appraisals.  I know that you can use a transport function for performance appraisals, however it does not really work well for me.  When I attach Category Groups (VB)

  • No library panel option under windows menu  PC signed in to cloud

    I have photoshop at home and work I want to use shape captured on my ipad noticed no library panel option under windows menu. in general Cloud, Bridge andLlibraries confuse me obviously not the same but after viewing tutorials more confused. Damian B