OLD deleted PSA request is being fetched by DTP in load-Very strange

Hello Friends,
One week before one delta request was loaded to PSA which was not updated to Target.
Because of some reason Later we had to delete the INIT after removing all the requests from PSA .tHEN we did init again (for some reason).Then II loaded first delta to PSA.wHEN NOW I am trying to load data from PSA TO CUBE,it is picking up old delta request also which is currently also not available in PSA.This is really strange.
request is not there in PSA but being extracted by DTP ??
Any idea ,why it has happened?
I have thought of a solution for it ..to make the previous delta request RED in infopackage monitor ...then to load the DTP again...But why it;s happening?
Is it SAp bug or I am missing anything here??
Thanks

Correct Ajeet.
Infact I had checked PSA and then INIT was refreshed.Still how delta request related to previous delta INIT is coming??clueless???
I had checked already with changing the date in PSA.....no old request is available.it is empty ...
And Ajeet,
It is easily visible in DTP monitor to see the request being extracted in load from PSA.
Any other Idea...we are at SP-17.
thanks
Edited by: Baljinder Singh on Aug 10, 2009 1:50 PM

Similar Messages

Error while deleting PSA Request Manually

Hi Experts,
I am trying to delete Older PSA Request, but it is throwing an Error "Internal Error occured during Authorization Check"....
Also, when i tried to see the Monitor, it is not showing any records anything...Its showing as no logs found...
I have used the Function Module "RSAR_PSA_CLEANUP_DIRECTORY_MS", but it is not working.
Can anybody suggest if there is any solution to delete PSA Request?
Regards,
Anuja

I don't believe this has anything to do with Crystal Reports. Please post in the SAP classic forums.
Don

Problem in Delete PSA Request

Hello Guys,
I have come across a strange behavior of Delete PSA Request variant in Process Chains. When I am trying to delete PSA through Process Chain, I could delete PSA of all datasources except 0CO_OM_WBS_1.
I tried it through different combinations, but could not delete data in 0CO_OM_WBS_1 through Process Chain. Can anyone help me through this, or any valid explanations on this front.
Thanks,
Saurabh

Hi saurabh,
It seems that you have some inconsistent requests in your PSA. Try running the program RSAR_PSA_CLEANUP_DIRECTORY/_MS and give your PSA technical name there which can be easliy found out once you click on the manage tab of you PSA at the top.
Just put that technical name & run the program in repair mode. One the program is success full, your chain should be able to delete the requests there after.
Check the Below thread, on how to delete the inconsistent requests from PSA.
Finding out the details of the user who deleted a PSA request manually
hope that the info helps you.
Thanks

Delete PSA Request

Hi Experts,
1. I need to delete PSA request(50 request) in BI 7.0 production system.
2. Also need to include the process type 'deletion of PSA request' to the existing process chain.
Pls provide me the steps to follow to perform the above activities.
Regards,
Anand

Hi,
I found this answer for deleting the psa request.
1.      Select the DataSource that you want to delete requests from the PSA for and choose Manage.
       2.      On the next screen, select one or more requests from the list and choose Delete Request from DB.
       3.      When asked whether you want to delete the request(s), confirm.
The system deletes the requests from the PSA table.
You can also delete requests in DataSource maintenance. Choose Goto ®   Manage PSA (pushbutton). Follow the instructions above, starting from step 2.
Can i follow the same in production. Pls confirm.
Regards,
Anand.

Issue in deleting PSA request in the backend table.

All
We have been facing this strange issue with PSA - Ideally, when we delete a request in the PSA, the contents of the respective back end table also get deleted. However, in case of one of the PSAs, if we delete the contents of the PSA, the same is not reflected in the backend table. As of today, the PSA is empty but the back end table has around 1 mn records. Looks like it has appended all the requests that we have loaded so far and not deleted the earlier entries.
Any help on this issue will be appreciated. Thanks.
Regards
Niranjana

In continuation it all depends on the SP you are ,i presume you are above SP>10 so below should not be an issue for you.
When you try to delete requests from the PSA that were loaded into the PSA using an old 3.X DataSource and the DataSource has been convertes into a new NW2004S DataSource in the meantime, you cannot delete the requests properly.
The administration information is deleted, but the data remains in the PSA table
Note 983618 - P10:PSA: Deleting requests after converting old DS to new DS
Hope it Helps
Chetan
@CP..

Unable to delete PSA request

Hello,
I am unable to delete the request in PSA the status of the request is Yellow(Undecided)
But I would like to delete this one.
Thanks,

Hello Ram,
Is it giving any error. If so what is that?
Right Click the PSA and select Delete
or you can use the function module RSATREE_PSA_DELETE_BATCH to clear all the PSA.
Thanks
Chandran

Delete PSA request from ODS

Hello Guys,
I need to know how can I delete the PSA request number generated when request is activated
This request is type: ODSR_*
I need to delete this request in order to activate again the data of my ODS reuqest ID, because a problem the activation terminated unsuccessfully, and know I see the request in red, and with the request for reporting available.
I want to delete it, because if I activate the request again, there is going to consume more space in my table space of ODSD.
thanks in advance

Ok, thanks for your help.
One more question.
The first activation failed, and when I saw the table space for ODSD, it decreased for about 1GB, my question is, if I reactivate the request, is going to consume another 1GB for the table space???
Thats why I want to first delete the PSA request that generates when activated data, in order to recover that space that was consume in the first failed activation.

Delete PSA requests; no table name

Hi,
I have to delete a lot of requests from PSA; I do this via a little process chain. Therefore I need to know the PSA table.
So I go to my DataSource -> Manage and see in the upcoming dialog window on top the name of the PSA table.
Unfortunately at some DataSources no table name is being displayed.
How can I find the table name, how can I delete quickly all the many requests?
Thanks!

Hi,
You can find PSA table name by Data Source (not by InfoProvider) with SE16. See Table RSTSODS in field specify DS tech name (with * at the end, eg: 2LIS_11_VAITM*): in field ODSNAME_TECH you will find tech name of PSA table.
Hope it helps.
Thanks and Regards,
MuraliManohar.

Delete PSA Request - unable to find the PSA table to see latest request ...

Hi, I wanted to delete request thru an ABAP program in a process chain. I'm not planning to use the Process Chain variant because it will a conditional delete and I want the latest request to be deleted.
I'm unable to locate the PSA table where I can find the reuqest. Any help is appreaciated.

Hey,
You can get the PSA technical name from the data source.
Double click on data source --> from menu bar --> goto -> Technical Attributes
Here you can find the PSA table name.
or you can fine the PSA Table name from the below table.
RSTSODS - Operational Data Store for the trans
here the entry in the filed -ODSNAME_TECH while provide you the tehcnical name of the PSA table.
Regards
KP

Delete PSA - "Requests newer than" date

When I go into the PSA for a datasource (via the "Manage" option), I get a list of my PSAs for the past 7 days. This is in the field "Requests newer than" field. Does anyone know how this default setting is changed? (I'm on 7.01 SP5).
Thanks

Hi,
I hope there are some Process types in Process chains check in help
http://help.sap.com/saphelp_nw70/helpdata/en/6e/192756029db54192427cf6853c77a7/frameset.htm
Thanks
reddy

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

Unable delete overlap request

Hi
I created pc like
start
load infopackage
execute dtp
delete overlap request
but i am ruiing pc i am getting all request, its not deleting old request. i am riunning full every day
ple let me know

Hi
I have 2 scenerios
first scenerio.
i am getting full load only 1 datasource in to 1 cube
so i created pc
start- delete psa request-load to psa-execute dtp-deleet content of cube
2nd scenerio is
i am getting 1 full load daatsource every day full, another is delta (every day)
start- delete psa request-load to psa-execute dtp-delet overlap request
ple give me any modifications from ur end

Delete Overlapping Request

Hi All,
I am trying to use the process type Delete Overlapping Requests from cube in Process chain after loading the data from the Infopack full load and DTP Delta . With the infopackage selection in process type the message after execution is no overlapping request found.
Deletion selection I used is Full or Init loads, Same Datasource. and Selection are same or more comprehensive.
And in the infopackage I dont have any selections.
Please help me to solve this error.
Regards
PV

C i'll explain our scenario..
there was data loaded from 2 data sources to one cube thru 2 dtp's from 2 DS's in process chain...
Soon after the 2 DTP steps, delete overlapping request step is defined from both the ends.in chain...in whcih variant is
object type: the same DTP and its name which loads from PSA to cube.
radio button selected as: edit all infocubes with following delete selections.
selections: delete existing request under which Only delete request from the same DTP.
same or cmprehensive.
the other variant is defined as the same but with another DTP name in object type..
the Output of the cube will be only latest(current day) requests..
rgds,

How to delete PSAs via process chain

How to delete PSAs via processchain using program(need to delete automatically).
For that i have to create the processchain for specially deletiung the PSAa and need to write the code for deleting automatically.

Hi
Please follow the below steps for PSA processchain deletion.
Create the Start varint
Drag the PSA deletion PSA Request from left menu bar proces types
Click on maintain varinat of the above dragged psa deletion
There you select like below
Object Type:PSA
Objectname:PSA Table name
Select the below options on the same screen as Older than 10 days ...
As per your requirement you can select the options..
Hope it will helps

Delete Overlaping Request

Hello Experts
Please read my requirements.
I have an infocube with Full Load DTP. It gets the records directly from PSA. Its all in BI 7.X. My infopackage is on a datasource that is Delta Capable. Due to the design flaw, I get the records directly from PSA into InfoCube without DSO and hence the duplicate records.
What I did was, I initially ran, infopackage with "Initialize Delta with Data Transfer" and ran my DTP. All the records are in my InfoCube. So far so good. Later I created a process chain, in this Order.
Run Delta InfoPakcage
Run DTP (Full all the time) - This time it gets the full as well as delta records from PSA.
Delete Overlaping Requests
What I observerd was some of the records are still getting duplicated and some not after couple of days. Any ideas Why?
In "Delete Overlaping Request" process I selected the DTP while defining it and not the InfoPackage. How this process work with Delta InfoPackage. Please explain?
Thank you
BW User 999

Hi,
You can avoid using Delete overlapping request,and load the data correctly to the cube via Full DTP.
Only if you dont need to previous days data in the PSA.
Every time when the process chain is executed
1) After the start process delete the PSA.
2) Load the data through the Infopackage.
3) Load it to the cube with the Full DTP.
In this way you wont need to delte the overlapping request. Hope this help...
Regards,
Mahesh.

OLD deleted PSA request is being fetched by DTP in load-Very strange

Similar Messages

Maybe you are looking for