Old Elements to compare with CS6

I want to compare my old Elements 10  that I had on my windows CPU with the CS6 I want to cancel. I can not pull up Elements.  How do I retrieve it back?
U

I finally found my old cd and it first said to remove the old one. So I did
and while it was re exe. a message said I had a Newer version and it stop
loading. I believe it to be the CS6 Photo shop. and any rate each time I
tried I got the same message.  So if I am right? Photo shop is the same?
some has extra bells and stuff am I correct?

Similar Messages

  • I use Adobe Premiere Elements 11. I want to make a Credit Roll and start off screen and stop with the credit remaining still in the middle of the screen. I know this can be done with CS6. Can this be done in Elements 11? Does Elements 12 or 13 have these

    I use Adobe Premiere Elements 11. I want to make a Credit Roll and start off screen and stop with the credit remaining still in the middle of the screen. I know this can be done with CS6. Can this be done in Elements 11? Does Elements 12 or 13 have these options for Credit Roll.

    stevel
    Please read my work on this topic which involves Premiere Elements Preroll and Postroll settings.
    ATR Premiere Elements Troubleshooting: PE: Preroll and Postroll Options Interpreted
    Especially the section relating to Titler, Roll and Crawl Titles.
    Please let us know if that worked for you.
    Thank you.
    ATR

  • Help with Textures, Element 3D and Photoshop CS6

    Hello,
    I thought this was the best place to ask my question due to the Photoshop details...
    I am using Element 3D with CS6.  I downloaded a model that was in 3DS Max format, so imported it into Photoshop and exported it as a .OBJ file so element could read it.
    The model shows up in Element but when i go to apply the textures they do not work.  I tried different file types from Photoshop (.jpeg & .png) but none are opened in Element.
    Does anybody know why this is happening?
    For easy access, i would like to stay within the Creative suite to do this type of work.  It seems Photoshop CS6 has been updated enough for 3D that it should work.  I realize Blender might be a better option but learning another program is a lot of work.  So if I could ask for Photoshop specific responses (unless Photoshop just can not do this properly) I would would appreciate it!
    Thanks

    Thanks for your reply.  As you can see, I am pretty green when it comes to 3D.  I opened the model in Photoshop and it looked as it should be.  I then went to "export 3D layer" and exported the model as a .obj for Element to read.  Photoshop then displays a dialogue asking what format you want the exported texture files in.  This is where I tried original, jpeg and png.  None show up in Element.
    Is there another step I am missing in Photoshop to prepare or export the textures?  My model is RGB 8bit in Photoshop.
    I have heard of textures being "baked" which would solve the texture issue but is know is not good for resolution.  I mainly do video but am looking to add some graphic elements in my work.  Being able to download models and incorporate them is all I am really after.  Nothing crazy and I hope I can accomplish this without needing to become a 3D wizard.
    Thanks for your help!

  • What older versions of PS Elements are compatible with my older iMac?? I'd like to upgrade to an newer version (eg. versions 7-10) that will run on my old iMac. Some versions are PC only.

    What older versions of PS Elements are compatible with my older iMac?? I'd like to upgrade to an newer version (eg. versions 7-10) that will run on my old iMac. Some versions are PC only.

    And which model imac? Is it a G5 processor or Intel?

  • Pen pressure issues with CS6

    So, I'm having an odd issue with my tablet and its pressure sensitivity with CS6. I've got a Genius MousePen tablet; M508W model. I can use it on my mac computer with photoshop elements; pen pressure works just fine with it. In CS6, when I do the stroke preview for all of my burshes, it shows the tapering-- as well as in the brush settings. When I go to make an actual rush stroke though, it doesn't apply the pressure settings. I've got the most recent drivers for the tablet downloaded, All of the old driver software was uninstalled, I've made sure that the drivers are for my version of windows, I've tried setting the compatability back to windows 7 and using the windows 7 drivers, but STILL nothing. The only reason I'm lead to believe that this is an issue with CS6 is that the tablet works with PS Elements just fine. If anyone could help shed some light on the situation, I'd greatly appreciate it.

    I am having a similar issue.
    Working in CS6 on a Cintiq Companion.
    Pressure sensitivity disappears while I'm working.
    The only way to get it back is to quit out of Photoshop and relaunch.
    The pressure sensitivity works fine in Autodesk Sketchbook.

  • I do not have many messages but my iphone 5s says messages take up 4.6GB of space.  When comparing with friends who have many more message, less than 1 GB is being used on their phones.  Why are mine taking up so much space and how do I correct that?

    I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space.  When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages.  Why are mine taking up so much space??

    I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
    But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

  • Any Idea How Temperatures Of New Imacs Compare With Previous Models ?

    Has anyone had a chance to test or compare the operating temperatures of the new and old models ?
    In particular I would like to know how the new entry 2.4GHz compares with the old 2.0GHz.

    Found my own answer...
    Mid to late Feb, G73 series. 
    Gonna be hot!  Looks like they will be able to run all the most demanding games on highest settings.  Sweet deal. 

  • Matrox MX02 with CS6

    Hi,
    any ideas if the matrox mxo2 works well with cs6, have a chance to buy one loacally for a low price.
    I am aware that there has been issues in the past with matrox products, is it still the same.
    any other recoemndations for a I/o
    Baz

    The MXO2 mini works far better with CS6 than it has with previous versions, particularly with the recent revised driver.
    You should bear in mind that the changes in Premiere have forced the removal of most of the old Matrox effects, and those that remain are no longer RT. 
    You no longer use proprietary Matrox presets as Premiere now copes with anything you throw at it.  I still use the Matrox colour correction as I am used to it, and prefer it to the Adobe effects.  Despite not being RT, it plays smoothly on my timeline without rendering, even when I have used Mercalli, scaling, and sharpening as well.  This is on a 3930K system, not overclocked, with either 1920x1080p Matrox HD I-frame, or high bitrate Canon AVCHD 1080p.

  • PSE-4 Elements color matching with RX500 Epson Printer

    I recently upgraded to PSE-4. I own a desktop DELL running XP.
    When I print out photo's the color does not match what I see on the CRT.
    The printer is an EPSON RX500. I had no problems like this using PSE-3.
    I tried messing with the printer settings but to no avail.
    Looking for some much needed direction on this.
    thanks,
    _ken

    I too have a MacBook with Lion and an Epson R2880..I'm in the process of evaluating CS6 on the
    MAC platform after using PS and Premier Pro on Windows boxes since 1995; so far I'm
    very impressed with how CS6 runs under LION given the somewhat strained
    relationship between Apple & Adobe..but I digress..my first attempt at a print
    with Luster produced very distorted imagery compared to that of my Thunderbolt
    display (which I love BTW)..I recognize the distortion almost certainly
    that caused by either 1)an improperly selected printer driver in the dialoges or
    2)bad or clogged ink jets or 3)a printer driver not updated for my new hardware/software
    combo..in this case LION with CS6 (beta s/w)...now in my case its not #2 as I just
    printed the same tiff file with CS5 on my Windows machine perfectly; its also not #1 cause
    I checked & rechecked the matte settings...I suspect #3 is the culprit..I'll do some
    more troubleshooting with this and report back..
    Oh, BTW, soft proofing on my MAC TB display revelaed not distortions so even
    tho I have done no monitor calibrations on this display I have no reason to
    suspect thatas the culprit..

  • Cannot open eps files on maverick oSX with CS6

    I cannot open eps files on maverick oSX with CS6. AI and FW just hang and need to force quit to continue.
    I have tried using FW but no success. I can open old files but no new ones (existing on my computer) since upgrading to Maverick on a Macbook air.
    The files will open in Photoshop (as raster) and are able to be placed in ID.
    No Plugins in AI or FW.
    Latest Java update.

    If you can't open them, but place them, then the files might have been created with a newer version (like CC) or they might just be (partly) corrupt.
    You can try and create a new Illustrator file and place the EPS in it (embedded).

  • New Mac With CS6 & LR4

    The life of my old Dell is gone with LR 3.6 and CS 5.5 and I got a new iMac
    27 in with 2 Tara and 256 solid state drive. Set it up Wednesday and
    yesterday. All my old files from 3.6 were put on a DVD on my old Dell pc.
    Installed CS6 and LR4 with help of old previous serial numbers from previous
    versions. Had to get  a bit of help from Adobe Customer Service to d/l and
    install upgrade to LR4.1. Whew!!
    Put a dvd into my new imac to bring in 20 or so shots into LR4. They showed
    up right away and went to import them to a folder I made and named Nikon
    Raw. Hit the import button and waited and waited and waited for about 10
    minutes before the 1st raw photo appeared. I only did 5 photos as it took a
    good 5 to 10 minutes to import each photo from the DVD. Took a breather and
    then tried to work with one of the ones I did import. All worked ok and even
    edited the shot into CS6 to sharpen and crop it. Saved the file and it came
    back ok into LR4.1.
    Then noticed a question mark on my desk top where ACR was parked next to LR
    and CS6, which is next to the trash barrel. Tried to open it but nothing.
    Checked the dir and only found some sub/file folders under ACR, but the dir
    for ACR was gone.
    So I am going to re-install CS6 again to get back ACR. I am also concerned
    about LightRoom importing this way. 5 to 10 minutes is not acceptable. Can
    anyone here please give me some advice?
    My iMac has Mountain Lion running ver 10.8.2. I checked before hand and
    Adobe said they did their tests on Lion but felt that there should be no
    problem with Mountain Lion or at least no problems had been reported.
    I rarely ever ask for help as I never had a problem with my PC with CS5.5 or
    LR3.6 or earlier versions, but sure need help now.
    The catalogue in LR4.1 is new and I never even tried to import my old one
    from my old Dell pc. This was all a clean install and worked ok.
    I have Time Capsule as well and did 1 back up but the main file of ACR is
    missing except for a few sub/folders under it relating to ACR. I guess I
    must have some how deleted it.
    Thanking you in advance for your help.
    Tunney

    Snow Leopard (with Rosetta) running in Parallels 7 in Lion:
                              [click on image to enlarge]
    Full installation instructions for Snow Leopard in Parallels 7 here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • Will Premiere Elements 12 work with Photoshop Elements 11?

    I have PS Elements 11.  Can I get Premiere Elements 11?  How?  How much?

    Kay Latona
    You wrote
    I have looked for PRE 11 online, incl. Amazon, but it's "not available" or
    "discontinued."
    For informational (non promotional reasons) I would call your attention to the following which is currently displayed at Amazon.
    Amazon say In Stock (Is that a misprint that becomes evident when you tried to place the order)?
    http://www.amazon.com/Adobe-Premiere-Elements-OLD-VERSION/dp/B0093FROFM/ref=sr_1_2?ie=UTF8 &qid=1389139027&sr=8-2&keywords=Premiere+Elements+11
    How do you want to integrate the program relates to getting the Elements Organizer Slideshow Editor slideshow into a Premiere Elements project in the .psess, non wmv, route using the Slideshow Editor's Output option "Edit With Premiere Elements Editor". When you go this route, the Premiere Elements option "Break Apart Elements Organizer Slideshow"  command is available and enables you to do significant additional edits to the slideshow. This type of integration is typically available with integrated sets, such as 12/12, 11/11, etc.
    If you are using the Elements Organizer as a storage place for organized videos, you could import them into any version of Premiere Elements version (provided the formats are supported by the version) from their computer hard drive save location.
    Both Photoshop Elements 11 and Premiere Elements 12 are standalone program programs that come with an Elements Organizer, one with Elements Organizer 11 and the other with Elements Organizer 12. If you have an dedicated bunch of organized videos in Elements Organizer 11, you can convert that catalog in Elements Organizer 12 that comes with Premiere Elements 12.
    With all those words...
    Photoshop Elements 11/Premiere Elements 11, same catalog database....if you can find a copy of Premiere Elements 11
    Photoshop Elements 11/Premiere Elements 12, and look into converting the Elements Organizer 11 catelog with the videos once you open Elements Organizer 12 in your purchased Premiere Elements 12.
    Check out what is less expensive...
    a. Buy the bundled Photoshop Elements 12/Premiere Elements 12
    b. Buy Premiere Elements 12
    c. Buy Premiere Elements 11
    Please review. If you need clarification on anything written, please do not hesitate to ask.
    Thanks.
    ATR

  • Different Color in RAW as compared with Editor?

    When I open a NEF file in elements 9, work on the file and finally click on the icon 'open picture' the color in the editor is different as compared with may raw. what happend??? klaus2337

    thanks for your help. I checked whether the color settings are in sync...they are. but whatever i used (either without color or user oriented etc. The result is, that either the JPG file, which I open in the editor, or the raw file (from the same picture using the option JPG and RAW in the Nikon Camera) is different when I save the raw file with the icon 'open picture'
    klaus2337

  • Does Adobe Color CC (for iPad) work with CS6 (on computer)?

    I have a mention of an update for Adobe Kuler on my iPad. it would be changed to Adobe Color CC. However before I update I want to make sure it would work for my Adobe CS6 programs on my computer? Or should i keep the older version of Adobe Kuler for iPad?
    thanks,
    Joleen

    Can you explain what you want to do with CS6?  Themes you create with your iPad will be saved to the color service.  And, if you make those themes public, you will be able to access them via the old Kuler extension. 

  • Opening older files with CS6

    On a Windows platform.
    I recently installed CS6 and everything appeared to be working fine.
    I was able to open older CS5.5 docs without any issues. I decided to delete the entire CS5.5 Suite
    and now I find whenever I go to open any of these old CS5.5 InDesign docs the small icon beside the
    file name appears as a "blank page" and simply clicking on it will not allow it to open in InDesign CS6.
    When I right click the file name I would expect to see the usual options in the Open With dialog box to include InDesign CS6
    but the only program to appear is AI. I did the "browse" routine in within this Open With dialog box, pointed to the actual InDesign
    program in my system but it doesn't appear in the dialog box.
    I've even tried going into System>Default Programs setting and associating the suffix with CS6 InDesign and
    the same thing happens, i.e.,  I browse to locate the program in my system and hit open it doesn't appear in the Default Programs dialog box.
    I have to launch CS6, point to the file and then it will open.
    When I save over the open doc it does not update the icon and the files as well so I have to continue to launch InDesign, point to the file and open it.
    No problem with associating Photoshop, Illustrator, Fireworks, etc. with their usual file types which are part of the Suite.
    Any thoughts as to what I can do to solve this irritation?

    Seems like there are nasty left-overs from CS5.5 in the registry. Adobe has that Cleaner Tool, but it is intended to solve installation problems only. It might help, but you also might be forced to install CS6 again.
    Let's try registry. Assuming you're speaking of INDD files, do following:
    open registry editor (Start menu->Execute->regedit) and open tree folder HKEY_CLASSES_ROOT and scroll down to ".indd" key.
    check the value Standard for being "Indesign.Document"
    scoll further down to "Indesign.Document" and open subkey Shell->Open->Command. The value Standard should show the path to your current ID CS6 exe and have "%1" as argument.
    open subkey Icons->Current version and check value Standard to be "8.0". If not edit it to "8.0" (without quotation marks of course)
    Go to folder HKEY_LOCAL_MACHINE->Software->Classes and perform steps 1-4 here as well.
    Go to folder HKEY_CURRENT_USER->Software->Classes and check if there exists subkey ".indd" and if so, also repeat steps 1-4 here.

Maybe you are looking for