Old FM line item not found at time of GR reversal

Hi Gurus,
Happy new Year 2010,
Scenario:
My client has created pr and po in 2007 and done migo in 2008 .
Account assignment-P
they assigned WBS as well as Fund center and commitment  also.
During 2007 they have deactivated the derivation rule and created new derivation rule with combination of other gl ,fund center and commitment.
Now user trying to reverse the same GR which was posted in 2008 but system is throwing an error that                                          **OLD FM line item was not found.**
Now year end process also completed.
Please suggest how we can reverse the GR ,if we reverse then what will be impact on budget /FI accounting and might be an audit issue.
Note: How can I give award point please tell me the process so I can give award point also.
Thanks & regards
Arun K Pandey

Dear Arun,
is this still an open question?
thanks
Mar

Similar Messages

  • Windows 7 error: Location is not available or Item not found

    I'm using windows 7 ultimate. I have a directory on a 1TB external usb drive called "1976 T.N.T". I am neither able to access this directory nor am I able to delete it. When I double click to access it windows says -
    Message Title: "Location is not available"
    Message Text: J:\Music\Library\Rock-Metal\ACDC\1976 T.N.T refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet
    or your network and then try again. If it still cannot be located the information might have been moved to a different location.
    When I try to delete it windows says -
    Message Title: Item Not Found
    Message Text: Could not find this item.
    This item is no longer located in J:\Music\Library\Rock-Metal\ACDC. Verify the item's location and try again.
    I have tried the following -
    1. Deleting file using command prompt but that doesn't work
    2. Check disk with both options "File system errors" and "Bad sector recovery" selected - it does not report any errors and the problem persists
    3. Rebooting the computer
    4. Disconnecting the drive and connecting it to my xp pro laptop (messages on xp are slightly different but to the same effect)
    Any suggestions short of formatting the drive will be appreciated.

    The cause of this is as follows:
    The directories in question were created or last modified by a process other than Windows Explorer. This process created a directory name with a space at the end. When you created a duplicate directory, the exact directory name you created was therefore
    not exactly the same; it had no space on the end. That is why both directories with the apparent same name could coexist.
    Note: if you attempt to create a directory from within Windows Explorer with a space on the end, the process explorer.exe is designed to prevent this from happening. That's why it's never usually an issue.
    To reproduce this problem, you could do the following:
    1) Create C:\foo
    2) Create C:\bar
    3) Use Robocopy to create the erroneous directory using the following command:
    robocopy "C:\foo" C:\bar" /E
    Notice that I missed the first double-quote on the target location. Robocopy should have responded with an error, but due to the way it interpreted my input, it didn't.
    Now you will see a directory called C:\foo\bar
    Except this directory is actually: "bar " - the word "bar" with a space on the end.
    Now try deleting C:\foo altogether. It won't because there is a directory underneath it that has an invalid name.
    Now try entering C:\foo, and creating a second directory called "bar". This will work, and there will appear to be two directories named "bar".
    But this time you can go up a level and delete "C:\foo".
    Put it down to a bug in Windows, a bug in Robocopy, whatever you like! That's the reason though...

  • Miro line item not generated

    Dear All,
    I have facing one issue at the time posting in MIRO.
    I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     32100.00
    96              PL.VND.RM.IMP GR/IR                     32100.00
    40              Purchase RM-IMP                            32100.00
    50              Purchase offset.                             32100.00
    And Miro Posting on date 23/03/2010
    Post key   description  amt                               curr.( USD)
    31           xyz Vendor                                    32100.00
    86           PL.VND.RM.IMP GR/IR                    32100.oo
    89           Stk.RM -IMP                                    -
    40           Purchase RM-IMP                          -
    50           Purchase offset.                           -
    But when I post for another po in migo on date 03/01/2010
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     76800.00
    96              PL.VND.RM.IMP GR/IR                     76800.00
    40              Purchase RM-IMP                            76800.00
    50              Purchase offset.                             76800.00
    and miro posting on date 19/02/2010
    Post key   description  amt                               curr.( USD)
    32            yz Vendor                                       76800.00
    86           PL.VND.RM.IMP GR/IR                      76800.00
    89           Stk.RM -IMP                                      Line item not generated
    40           Purchase RM-IMP                             Line item not generated
    50           Purchase offset.                              Line item not generated
    Can any one tell why line item not generated for miro posting .
    Regards
    Milind

    Hi,
    The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
    Other wise it wont show those extra line items
    Please check group currency , global currency etc. for  your extra line items

  • BAPI_SALESORDER_CHANGE: Error-Item not found

    Hi,
    I am calling BAPI_SLESORDER_CHANGE from an enhancement in the include MV45AF0B_BELEG_SICHERN. This will be called after the commit work of sales order. Im using this BAPI for the purpose of changing/updating the Inquiry line item from which the SO is created.
    When I execute the BAPI in SE37 by passing the Inquiry no. & item to be updated, it is not giving any error. In my enhancement, I am passing the same values but getting the error: ITEM NOT FOUND.
    When I debugged the BAPI, the error is raised in the Fm SD_SALES_ITEM_READ.
    In the below code in FM, VBAP is getting filled inside the PERFORM VBAP_BEARBEITEN_VORBEREITEN but when it comes out of this subroutine, the VBAP is initial.
    But when executing with SE37, this VBAP value is not getting cleared after the subroutine.
      PERFORM XVBAP_LESEN_DIREKT_SVBAP(SAPFV45P) USING ITEM_NUMBER.
      PERFORM VBAP_BEARBEITEN_VORBEREITEN(SAPFV45P).
      EVBAP = VBAP.
    Please help me out to resolve this issue.

    Yes,
    but in sales order creation you are going thru a different code:
    * Anlegen <= Here from sales order creation
      IF SVBAP-TABIX = 0.
        CLEAR:  MAEPV,
                MAAPV,
                MTCOM,
                XVBUP,
                XVBAPF,
                KONDD,
                XVBAP.
         *VBAP = XVBAP.                    " Getuntes clear
        HVBAP = XVBAP.                     " Getuntes clear
         *HVBAP = XVBAP.                   " Getuntes clear
        VBAP = XVBAP.                      " Getuntes clear
         *MTCOM = MTCOM.                   " Getuntes clear
        MOVE-CORRESPONDING XVBAP TO VBAPD. " Getuntes clear
         *VBAPD = VBAPD.                   " Getuntes clear
        CLEAR: HVBKD, *HVBKD.
    * Steuerflag für Textverarbeitung initialisieren
        CLEAR NO_TEXT_COPY-ITEM.
        clear no_text_copy-check.
      ELSE.
    * Ändern <= Here from SE37
        VBAP = XVBAP.
    It's a completely different behaviour!
    Regards,
    Klaus

  • Deleted line  item not display in Print preview

    Dear All ,
                                    Pl guide that when i delete the line item from a P.O then this deleted item is not visible in Print Preview .pl help what are the exact setting due to which i can know why this del item is not coming in Print Preview.
    Rgds ,
    Rajeev
    Edited by: sap11 on Feb 11, 2009 10:37 AM

    HI,
    Using the standard programm and print form the system works as follows:
    When you will create a new Purchase order with two line item. System
    will create new message record with  Change message flag (NAST-AENDE) as
    space and processing status (NAST-VSTAT) as  0 "not processed".
    After this if you will output the message using ME9F then system will
    update the message processing status NAST-VSTAT as 1 "Successfully
    processed".
    When you will delete line item 10, at that time system will create
    one more message record with indicator Change message flag
    (NAST-AENDE = X ) and processing status 0 "not processed".
    Now system contains two message records in table NAST, one for which
    processing has been done and one change message record for which
    processing has not been done.
    If you will run ME9F with processing status 0 then this means you
    wants to output the change message record means you wants to inform
    your vendor that item 10 has been deleted. That's why system show
    line item 10 but you can notice in print preview, system mentions that
    item 10 has been cancelled.
    If you will run the message with processing status as 1 then this is
    not change message output means system will show you latest print
    of purchasing document and thus will not show line item 10.
    Please take the print out of both message record and you can see the
    difference.
    I hope this information helps!
    Best Regards,
    Arminda Jack

  • Display line items not possible!

    Hello
    I've a very strange situation on the productive system:
    I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
    - flag on display line items  AND
    - sort key  001 - POSTING DATE
    why??
    thanks a lot in advance,
    Chiara

    No, the answer was not that one, but thanks anyway.
    Finally I found the answer in
    Forum:  Message MSITEM033 in New GL - Cannot Display GL Line Items
    note OSS:
    -  1323960   Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
    -  1149500  Clearing open items by batch input selection
    -  1437341   Note 1437341 - Correction of BSEG/Index tables after note 1323960
    regards,
    Chiara

  • Component Monitor - Item not found /runtime

    Dear all,
    When i try to open the component monitor via System Administration -> System configuration -> Knowledge management, i get the following error:
    Item not found
    /runtime
    The item you are trying to access is not available. Try to check....
    This error came up the first time after deployment of some custom scheduler tasks. The same tasks were deployed on DVL and QA systems, and everything worked fine there.
    There is a thread on sdn forum (https://www.sdn.sap.com/irj/scn/thread?messageID=902388) that mentions the same error, but the explanation there is not really clear to me.
    I deleted my custom tasks via the configUninstaller and removed the archives via Support and did a restart of the portal, but the error stays the same.
    I hope someone can help.
    Kind regards,
    J.

    Closed. Not solved.

  • Regarding Template updates, what does this error " not updated, item not found" mean?

    This is the second time I've posted this question so hopefully somebody will respond. At some point in the last few weeks I found that I could no longer apply a template in a group operation (returns the error shown above). If I modify the template and save it it shows all the related files to be updated but does not actually update them and again returns the error "not updated, item not found". As a test I created a duplicate of a particular .html file and applied the associated template successfully. When I apply a template change it does properly update the newly created file but not the others. I also did a mechanical file compare (using windiff.exe) between the original and duplicate file and there are NO differences in the two .html files. I have also deleted and recreated my site maps several times.
    As an aside, Library items do update successfully.
    I am running Dreamweaver CS6 on Windows 7.

    I have an extensive home network and I consider myself to be very proficient with personal computers (had one since 1981) so let's start at that level.
    I have you beat by 2 years. Bought an Apple II+ in 1979!
    When this problem first started, I went to another PC (home built desktop Win 7 64 bit) I have and created a new Dreamweaver site copy using an instance of the site that was on a network share running on a NAS box (Netgear RAID5) that I use for central file storage. Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with. Now I have no idea why sites housed on my PC are having a problem but that seems to be the issue.
    Your setup is very similar to mine - NAS (I'm using an Intel NAS) housing all my working files.
    Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with.
    So it's working in the duplicate site, but not the current site. And in the current site, you have some files that update as desired and some that do not? Why not just make the duplicate site be the main working site?
    Anyhow, I cannot think of any wrinkle that would cause DW to update some legitimate child files in a site but not others, except for a corrupted file cache.

  • Line item not relevant for payment release

    Dear Expert,
    When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
    I also have set payment block in master vendor and  OBB8.
    Can you tell me why the error message still appear?
    Kindly need your help
    Thanks and Regards,
    YL

    Do you have any workflow variant in place?
    Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
    Vendor itself will not get paid until unless you remove the block option
    Thanks

  • FI Archiving - System error: Customer/vendor line item not on OI basis

    While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
    Regards,
    Shailesh

    Hi Adisha,
    This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
    Either you wait for the next invoice with big amount but which seems bit impractical..
    In this we really need to consult the Accounting Standards to see what it could allow.
    Regards,
    Chintan Joshi

  • TDS line item not generated during down payment.

    Hi,
    TDS line item not generated during down payment to vendors. Advanced tax codes have been properly assigned to vendors.
    Kindly help.
    Thanks in advance...
    Regards,
    Sriram.

    Hi Sriram,
    1.First tell me when you are doing the advance payment tds codes are giving popup or not?
    2.Did you check the setting in below path
    Assign with holding tax types to company codes:
    SPRO>FI>FI GLOBAL>WTX>EWTX>Company code>assign with holding tax to company code.
    Regards
    Surya

  • TDS line Item not flowing in Simulation/Entry

    Hi Expert,
    We made separate tax code for 194A and made all relevant configuration but in vedor invoice entry, tds line item not flowing . Why this happening , please let me know..
    Thanks,
    Dharmveer

    Dear,
    Check the field status for the vendor reconciliation GL account.
    1. check the field status group assigned to vendor reconciliation GL account in FS03.
    2. use transaction OBC4 and select the respective field status group and make all entry optional under TAXES group.
    Regards,
    Chintan Joshi.

  • Tds line item not simulating while posting as reference with FBR2

    Dear All
    When I am posting an Invoice using previous document as reference with Tcode FBR2 WTax line Item not simulating, but while I am posting  without reference  i.e. with Tcode FB60 it is simulating, this problem i am facing in production server from this fiscal year but in development server it is working properly.
    what is the possible cause and how to solve this problem.

    Hi,
    For WHT cannot be deducted by using F-02 OR FB01.  It seems system is using the same transaction in background and not FB60 and hence tds is bnot getting deducted.
    Regards
    Milind Sonalkar

  • Error : Balancing Field " Profit Center" in line item not filled

    Dear Friends,
    I have a specific issue, as my client while posting inventory differences in [MI07]  an error is populating as Balancing Field "Profit Center" in line item not filled.
    Please help me in solving the issue where we can assign the profit center other than in materal master as they donot maintained any profit center in material master for all materials
    Thanks inadvance
    Sri

    Hi BK , thanks for your answer
    in kch3 there are several profit center groups and how can we identify whcih profit center is assigned to whcih profit center group
    regards
    sri

  • Itunes - how do i select multiple line items not in sequence ?

    itunes - how do i select multiple line items not in sequence ?

    Hold down the Command key and click each in succession.
    To extend the selection across items that ARE contiguous, use the Shift key.

Maybe you are looking for