Old Hard drive/ running Vista

Ok so I have an Hard Drive from a Dell Dimension 2400... I want to use it to run Windows Vista on (or hopefully I find a copy of XP somewhere), is there any thing else that I would have to do other than hook it up to my Mac Pro, and run bootcamp or Parrells...On a side note which do you think preforms better Bootcamp or Parrells?

Unless the drive is a SATA drive it will only work in a Mac Pro if you install it in one of the optical drive slots. Only the optical drive buss supports ATA drives. Boot Camp requires a special installation on a partition created on a Mac formatted drive - it must be GUID partitioned and formatted Mac OS Extended Journaled (one volume only.) Boot Camp Assistant is then used to create the Windows partition.
See:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.

Similar Messages

I want to Boot from My old hard drive.

I an trying to do this work around so I can continue using protools 7 with my MBP running Snow leopard. I pulled out my old hard drive running Tiger and put it into a USB case. I installed a new 650GB hard drive in to my laptop, installed Snow Leopard and reinstalled all my old software. So far so good. Now I want to boot from the old hard drive running Tiger so that I can launch Protools 7. I choose the external HD as the startup disc and end up getting a circle with a line through it on startup.
Is there something else I need to use my old hard drive running Tiger as a startup disk?
Thanks!

If the original HD still has the version of Tiger installed on it that came with the MBP (probably Mac OS X 10.4.8, build 8N1037, 8N1051, or 8N1430) or a later version of Tiger like 10.4.11, then the MBP should be able to boot from it.
To determine what OS & build number is on that drive, open the Startup Disk system preference. Hover the pointer over the drive's image in the window & the OS version & build number will pop up in a ToolTip window after a brief delay. What does it show?
Also, which MBP do you have? Open System Profiler to the Hardware Overview page. What is the Model Identifier shown in it? Is it "MacBookPro2,2" or something else?
Assuming the OS version & build number are sufficient to boot the MBP, it may be that the USB enclosure does not support booting. Most do, a few do not. What is brand/model of the enclosure? Do its specs specifically say it can boot a Mac?
If all of this seems OK, you can try running Disk Utility's two repairs (permissions & disk) on the external drive. If no errors are found, you may be able to get it to boot the Mac by reinstalling Tiger on it from the original system disc set. This will require updating the OS to the latest version you had installed on it for best results.

Any way to get old hard drive with winxp working on new m/b

I have moved from kt3 ultra aru 2100 to 845pe max2 fir 2.53Ghz. Is there any way to get my old hard drive running with all programs installed or do I have to format the drive and reinstall again the programs from beginning (a lot of work). Now when I connect the drive I get windows protection error.
Thanks

The best is a full clean sheet installation. Or you can attempt :
1. Use the CD and select Repair, which is actually reinstallation on the same partition.
2. put back the HDD on KT4 Ultra where it works. Goto Device Manager -> System -> Microsoft ACPI Compliant System. Uninstall it. You'll asked to restart the PC, let it restart but until the POST screen, shut the PC down, don't let it go into Windows. Put the HDD at 845PE.

HT4527 My old pc ran windows vista and mother board failed but the hard drive was good. I have a new system now and installed the old hard drive. how do I get itunes and all my music working now?

Hello, my old pc ran vista o.s. and the mother board died but the hard drive was good. I got a new system running windows7 and installed old hard drive to recover pictures and other data. How do I get my itunes and all my music back up and running.

See Recover your iTunes library from your iPod or iOS device.
tt2

HT1751 i bought a new, larger external hard drive. copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive. iTunes will not start or run unless old hard drive plugged in.??

I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
iTunes will not start or run unless the old hard drive is plugged in.
If I disconnect the old drive iTunes shuts down.
Any ideas. ??

Hello kskip,
Thank you for providing so much information about what is going on. It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive. You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M.

I want to import my bookmarks from my old hard drive to my new computer. Old hard drive is in new computer as secondary drive, can't run firefox from it. Would like to find the file where my bookmarks are stored

have looked in the old hard drive for the file where my favorites would be stored. the only file that I can find is not the latest. I did not back up my favorites on the old computer.

Bookmarks are no longer stored in an html file. Instead, they are stored in a file called '''places.sqlite''' in your '''Profile''' folder.
# Locate the '''places.sqlite''' file in your old hard drive.
# Copy it into the '''Profile''' folder of your new hard drive.
# Note that since you would be overwriting the places.sqlite in your new drive, your current bookmarks/history etc would be overwritten by the ones in the old drive.
For more information, see these articles:
[http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile] and [http://kb.mozillazine.org/Places.sqlite places.sqlite]
If you wish to know how to locate your Profile folder, read this article: [https://support.mozilla.com/en-US/kb/Profiles Profiles].

I would like to recover my bookmarks from my old hard drive that I now have as an external USB drive. The old OS was Vista; the new is Windows 7.

I recently had a new hard drive installed on my laptop; this hard drive has the Windows 7 OS on it.
At the same time, I had my old hard drive mounted in an SATB enclosure so that I could use it as an external USB drive. [I stupidly did not export my bookmarks before doing all of this]
Everything seems to work fine [I can see all of the files], but I cannot find out where my bookmarks are stored on the old hard drive.
Is it possible to find them and get them transferred over to the new hard drive??
Thanks!!

Bookmarks are stored in a file called places.sqlite inside the profile folder. You can copy that file from the old profile folder into your current profile folder. For details of how to find the profile folder see https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox
You can recover more than just the bookmarks - https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

Recovery of old programs from old hard drive and old operating system

Have new computer with Windows 8, installed my old hard drive from old computer running Vista, want to get access to my Adobe programs from that old hard drive and system. Can you help?

Not unless the installers are on that harddrive.
What version of Adobe software did you have installed on the old machine? Please keep in mind that anything older than CS6 could be a crapshoot on Windows 8.

I have an old hard drive from a ruined computer attached to my new one but i cant find my old bookmarks which i want to install on the new machine. help please!

my old computer was running vista, and i had hundreds of bookmarks in many folders, but i cant find these when exploring the old drive. I presume i cant use the import facility as i wouldnt be able to access the firefox browser itself on the old drive, but i was hoping the bookmarks would be stored somewhere accessible

thanks for the suggestions weather15 - the firefox help site you directed me to explains what ought to happen but i cant make it work. I shut my firefox browser on my new machine and attach the hard drive from my old machine. I can explore the contents of that drive but when i search it for the suggested folder " %APPDATA%\Mozilla\Firefox\Profiles\" nothing is found. when i try and open firefox from the old drive, the browser opens that is the new version that i have on my new computer with no saved bookmarks! Am I doing everything right?

Moving Data from old hard drive to new hard drive

I'm posting this question in this category , I hope it's the right place. Here's my situation and general information. I have a Toshiba L35 S2161 laptop, it's about 5 yrs old, running WinXP Service Pack 3. just got the blue screen, wouldn't boot, tried everything and I only have the factory provided "recovery" disc that will wipe my drive and lose all my data if I use it. I hadn't been doing regular backups, so I want to save as much if not all of my data as I can. I don't want to spend time here going over everything I've tried (boot disc like Knoppix, etc) which didn't work, just need to get to the bottom line and make sure I'm doing the next steps correctly.
Here's my plan:
l. Remove old hard drive from laptop
2. purchase new hard drive - I've been told any drive will work, it doesn't have to be designed for a Toshiba. I've been looking at best prices, etc. mainly Western Digital. I may purchase a larger drive to at least get more memory , although I really didn't have that much on my old drive, but had a lot of apparent memory-related problems, freezes, etc.
3. Install new blank drive into laptop, using the Toshiba factory recovery disc to reformat the disc and get it ready to receive the data.
4. Insert the recovery disc into the drive, turn on the computer and HOPE that it boots it up and installs a fresh install on the new drive. Not sure what the screen willl show at this point - I've never installed a new drive in a laptop, so will be somewhat nervous at this point to see what happens.
5. Assuming the new drive is recognized by the recovery disc and installs a clean version of WIN XP (I'm assuming that's what's on the recovery disc that came with my computer, because it had WIN XP pre-installed), I will now be ready to transfer data from the old drive.
6. This is the step I'm not sure what or how to do next. I would like to clone my entire old drive onto the new drive but I'm afraid if I do that it might load damaged files that would mess up my new install. I purchased a disc enclosure with a USB cable (haven't received it yet), and was going to use that somehow. I presume I will plug it in and it will show up as an external drive and I can access that drive and transfer my priority files or data first and then try to transfer as much more as I can....
I need further help and information about this last step...the critical data transfer method. There are cloning kits that are plug and play and would transfer my entire system as it was before the blue screen, but again, I'm concerned about transferring everything onto a clean install and finding myself with a computer that won't boot again because it transferred a bad file. Also, would it overwrite or interfere with the clean install on the new drive? I'm stuck at this point....hopefully someone out there can walk me through this final step with the best option for transfer. I'm trying to avoid purchasing pricey software like Acronis (which I looked at online and it seemed difficult to use, to figure out what to transfer).
My laptop is obviously out of warranty, being five years old, and I am not interested in taking it in to repair tech, I want to do this myself and I think I can with a few helpful tips. Thanks for any help asap...

Hi!
The error message I received on the blue screen was "unmountable boot volume" which leads me to believe i have a corrupted MBR. This fiasco happened when I turned off my computer when it was running a program (I know, bad thing to do).
I'm waiting on a new hard drive with a 120 GB (my old drive was 80GB). I was told not to go above 120 or I'd have partition problems.
The SATA drive enclosure powers up the old drive (I can hear the disc spinning) so the disc isn't dead. If I''d have the full retail vesion of WinXP I would of course have used the recovery console, but I only had the toshiba recovery disc that came with my system. Also, I couldn't burn a CD boot disc...didn't have access to another computer nor would a tech friend do it for me as he apparently made a disc for someone and their system crashed so I had no choice but to buy a new drive and try to transfer the data via the SATA external drive/usb cable.
My big question now is: Will the Toshiba recovery disc actually reformat my new drive? Someone on another forum with a Toshiba laptop had purchased a new drive, used the recovery disc and the cd just went into a constant loop and never went into a full install. I'm thinking that maybe on a new drive there isn't enough knowledge base there for the recovery disc to install and reformat a new disc. That would be a bummer because then I'd have no choice but to purchase a retail version of WinXP which I was hoping not to have to do. Thats' getting into some $$ when added to all the other thing I've tried to get this laptop up and running . (A Knoppix live CD boot disc didn't work either).
I don't know what service pack was on the old disc...possibly SP2, but if it was only SP1, I fear it's not going to have the ability to format a new disc. The disc does have drivers, etc. but the question is, are they able to install the OS. I was running XP3 when it crashed, so I know i would have to download that again. I just want to get the darned system back up and running with my new drive and restore disc. IF I can do that, then I'll try to transfer the data from the old drive via the external drive enclosure.
I also decided against the clone....I was afraid I'd be cloning a bad disc or errors onto a new drive, and didnt' want to stress a possibly wonky drive even more than it possibly is.
So, that's where I'm at now! Thanks so much for any further insight into this....something tells me the recovery disc isn't going to format my new drive but fingers crossed...more thoughts/feedback appreciated!

Im swithching from 2007 macbook pro 17" to 2011 macbook pro 17" . Can i clone the old hard drive and use OSX 10.5.8?

Can I install OSX 10.5.8 on a new macbook pro which comes with Lion? I would like to clone my old hard drive onto the new mac without lion causing compatibility issues????

trajan2050 wrote:
What if replace the new 2011 MBP drive with a brand new SSD with snow leopard pre installed?
Snow Leopard may be possible, depending on whether it was shipped from the factory with SL and had Lion installed in the supply chain, or if it shipped with Lion in the first place. However the SL version would have to be the one which was originally installed or later, which likely means 10.6.7 or.8. The retail 10.6.3 installer won't work, nor will an installation cloned from a different Mac unless it was from the exact same model.
Plenty of threads around concerning installing SL in place of Lion - do a search. Some have been successful.
Replacing the HD wouldn't be necessary, and won't make the OS version run the rest of the hardware.

How do I transfer applications & data from my old hard-drive to my new one?

My old hard drive started to crash, it was on it's way out and making funny noises. I have brought a new hard drive and connected it to the same leeds as the old one. I have put the opperating system on to the new hard drive and it is all up and running..... but.
I want to transfer all my old applications like garage sale and limewire without having to pay for them again and transfer all my music and photos from the old hard drive to the new.
So:
1: How do i get the old hard drive out of the position it's in it seems glued in and i can't see any screws?
2: How do i connect both hard drives and transfer everything from the old to the new? Do i need to buy another set of leeds or should they be in the computer
Your help would be most appreciated.....
power mac G4 466MHz Mac OS X (10.3.9)

Hi
You should be able to have both drives installed at the same time in the rear U shaped bracket. One needs to be mounted in the bottom of the bracket, have it's jumpers set to master and be connected to the end connector of the ribbon cable. The other needs to mounted above it, have it's jumpers set to slave and be connected to the middle connector of the ribbon cable. The computer should have the leads to do this, i.e. one ribbon cable with two connectors and two molex power connectors. With both drives installed, you can then drag your music and photos etc from the old to the new. You could try dragging the applications, although if they install additional files elsewhere they'll need to be reinstalled from the original CDs or DVDs.
The old drive may be screwed into the U shaped bracket from below. There should be a single screw which secures the bracket to the chassis at the front, although it may be hidden under the ribbon cable. If you unplug the ribbon cable and undo the single screw you can remove the bracket still containing the old drive, by sliding it forwards and lifting it up at the front. The screws securing the drive to the bracket can then be undone from beneath.

How do I transfer itunes library to new hard drive running lion os

I have a Mac Pro with 2 hard drives in it.
Hard drive #1 has Leopard OS and my iTunes library on it
Hard drive #2 has Lion 10.7.4 OS and this is where I want to move my iTunes library to from hard drive #1.
How can I due this insuring that all playlists, etc. transfer seamlessly. I will then only be using the new Lion OS
to run iTunes (and this will also communicate with Apple TV, etc.)
Thanks!

Copy the entire /Music/iTunes/ folder from old hard drive to /Music/ on new hard drive.
Start iTunes.
That is all.
You can also leave it where it it, hold Option, launch iTunes.
Slect Choose library... and select the iTunes folder on the Leopard drive.
This will be your iTunes for both OS, whichever you boot into.

My old laptop crashed and I have a new one, but I still have the old hard drive, can I get my old bookmarks from it?

My old laptop broke and I had to buy a new one. I have recovered all data from the old hard drive and want to know if I can recover my old Firefox bookmarks from it as well? I have put Firefox 4 onto my new machine, but cannot find a way to import the old bookmarks from the other hard drive!

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

How do I get my Firefox bookmarks off of my old hard drive (now installed on my new computer as the 2nd hard drive) and into my new installation of Firefox on my new computer?

I had a lovely computer, about 8 years old, running Windows XP; the mother board died; the hard drive was fine.
I now have a new computer, running Windows 7, and I have the old hard drive as my 2nd hard drive.
How do I get my old Firefox bookmarks off the old hard drive and into my new Firefox installation?

You can find your current profile using about:support pasted into the location bar then click on "Open Containing folder. That is where you will want to replace your old files into.
Next find your old profile on your old HD, see
:https://support.mozilla.com/questions/886839
With Firefox down replace the profile files you decide to replace.
You might get a better idea of what you are doing or might want from also looking at
* http://kb.mozillazine.org/Profile_folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Old Hard drive/ running Vista

Similar Messages

Maybe you are looking for