Old Ipod 3rd Gen not charging in usb

hi,
i have a 3rd gen ipod, wich was sold with firewire cable, i've tried to charge it with an usb cable, but it didn't charged...was it my fault or is it a normal situation?
thanx

The iPod video does charge over Firewire--however, it will NOT sync with the Firewire cable. A USB connecion must be used to add songs or videos to the iPod.

Similar Messages

  • Old iPod 3rd gen not showing up in iTunes

    Hi, I realize this may be a futile effort but I thought I would give it a try.
    I have an old ipod, 3rd gen 15GB that still works fine, stores a lot of music and plays fine. I would like to update and restore it. I have the old computer I used it with, an iBook G4 OSX 10.4.11 running iTunes 8.2.1, the most updated it can get for this computer I think.
    Im just wondering how I can restore the ipod and put mp3s on it. It doesnt show up in itunes but appears to be charging when I plug it in with the old firewire cable. its working ok to the best of my knowledge and I would like to do a hard reset or something but I cant figure out how. Any help would be appreciated. Thanks!

    Hey there Miles,
    It sounds like your iPod isn't showing in iTunes when you connect it to your Mac. I would start with this bit from the following article:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    First, try the steps in the iPod Troubleshooting Assistant which applies to your iPod.
    If you still cannot get the device to appear in iTunes, use the following link to help troubleshoot it:
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591?viewlocale=en_US
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IPod 3rd gen not working with universal dock

    My old iPod 3rd gen (15GB, touch wheel, dock connector) worked great with the old dock, until the latter started scratching noises when outputting audio to my stereo. Still charges the iPod though.
    So, I tried old iPod with the universal dock I got for my Touch and found the following problems:
    1. iPod is not being charged through new dock plugged to wall adapter
    2. touch wheel menu control is not working as long as iPod sits in universal dock plugged to the wall adapter - the sound of clicks is all I get, but no control of menu or any other function. In order to select playlist or use any other function through touch wheel or any of 4 buttons I need to unplug power from the dock (it is not charging anyway)
    3. remote is not working at all
    Otherwise playback is OK.
    Any ideas what may be the culprit here? Apple states that Universal dock is compatible with 3rd generation of iPod and up.

    Hello Andrew,
    What a coincidence as I too have had to find a new dock for my 3rd gen ipod. This week I purchased an Apple AV Connection kit - but found that it would not charge the ipod or respond to the remote. I also bought and tried a Belkin AC adapter with cable to power up the ipod but it too would not charge the ipod.
    To see if these units were working I connected them to a friend's brand new ipod classic and both the Belkin and Apple AV Connection Kit worked fine - so there is something different about the 3rd gen ipod.
    I'm not sure if this helps you - but at least you know it's not just your ipod that is not working with the new dock.
    Nick M.

  • IPOD 3rd Gen not recognized by itunes on firewire but it does on USB

    Hi,
    I have a 3rd gen Ipod (the one with the buttons) since its release date.
    It worked perfectly with FIREWIRE.
    Months ago i restore it and now it's a mess.
    I have to connect it via USB to sync it with my itunes library, to
    delete music, to add new one, or use it as a hard disk. But,
    the battery doesn't charge (actually the battery now only lasts for 1 hour)
    If i want to charge the battery i have to connect the ipod to the computer
    via FIREWIRE, but it doesn't get recognized by itunes, so i cant update
    it.
    I wanted to restore the ipod but if i connect it via USB, itunes send me a message
    that i have to connect it via firewire in order to restore it. But if I connect it
    via FIREWIRE i can't restore it because ITUNES doesn't recognize it.
    I hope someone can help me.
    thanks a lot
    IPOD 3rd Gen 15 gb
    Powerbook G4 with Panther 10.5.8

    If I were you, I will solve from the root i.e. replace the battery, you can do it with quite reasonable price here
    http://www.ifixit.com/iPod-Parts/iPod-3rd-Gen

  • IPod 3rd Gen Not Connecting to Windows AT ALL

    i have an iPod 3rd Gen 10gb. I use firewire to connect it to my iPod. When i connect it, it shows that it is charging but that is all. my computer won't recognize it at all. i tried a new cable, a new firewire card, i bought a USB cable, reinstalling iPod software and iTunes, the 4 R's obviously not restoring cuz it wont connect. i basically tried everything but no luck. any help would be appreciated.

    Do you use iTunes 7? If so please read the Topic I posted. Apperently I got the same problem with a new Nano. I discovered that when you attach the iPod DURING a Windows XP reboot it WILL WORK and see the iPod ...... until you disconnect again.
    Please see the Topic I posted:
    http://discussions.apple.com/thread.jspa?threadID=647294&tstart=0
    Best regards
    TheFactory

  • Ipod 3rd Gen battery charge issue

    I have various 3rd gen ipod's and logic boards. parts n pieces etc. here is my issue.... i recently purchased a new battery for 1 of these 3rd gen ipods to repair. when i first plugged everything in and connected usb cable ipod fired up no problems but the battery was not showing any charge. i even tested battery as it was charging with a multi meter. the voltage was slowly discharging. Now... i disconnected the battery and plugged it into a 2nd gen ipod mini and did the same thing. The battery showed a slow charge as tested with the meter. once the battery charged to full 3.7v i then put it back into the 3rd gen and powered it on only to the same effect with no battery charge indication and also a slow drain with the meter test. i've tried this on 3 or 4 different 3rd gen logic boards that i have and with the same results. I'm confused *** is goin on here. any replies please. thanks.

    Just how its logic board is programmed I guess.
    They make splitter cables which is a firewire and usb cable in 1, so if you have a wall charger you can charge and sync via USB at the same time.

  • My iPod Shuffle is not charging from USB

    Hi,
    My iPod Shuffle is perfectly operationnal when connected to my laptop thru a USB port.  I can see it with iTunes et it syncs perfectly.  The only problem, it does not charge.  I see the yellow light flashing for a few seconds, while it syncs and then nothing.
    I run Windows 8.1 on an ASUS laptop.  I have disabled the USB suspension.  Driver is not authorized to turn off the port to save energy.
    When I connect my iPod Shuffle to a desktop computer (running Windows Vista), everything is fine.
    Any clue?
    Thx

    I don't know where "fix" this will be (Microsoft, Asus, or Apple), but this may be what's going on...
    When an iPod is NOT set to Enable disk use (or Manually manage music), iTunes only mounts the iPod's disk when syncing.  The rest of the time, the iPod's disk is not mounted.  There may be a "feature" on your laptop, and/or in Windows 8, that attempts to save energy by putting the USB port into a low-power mode, when the connected storage device (the iPod in this case) is not mounted.  When iTunes unmounts the iPod's disk after syncing, it may look like an external storage device that no longer needs full power, even though an iPod needs full power to charge its battery.
    When an iPod IS set to Enable disk use (or Manually manage music), iTunes keeps the iPod's disk mounted continuously.  Therefore, the USB port stays at full-power mode and the iPod's battery is able to charge.
    I know you said
    I have disabled the USB suspension.  Driver is not authorized to turn off the port to save energy.
    but maybe that setting is not working properly (as it relates to iTunes/iPod), and that's the cause.
    A desktop computer does not run on battery power, so it may not have this feature; saving energy is not a high priority when the power source is the wall outlet, not a battery.  Or, Windows Vista may not have this feature.  Therefore, the USB port gets full power whether the connected storage device is mounted or not.
    One additional test you can try is to see if it makes a difference if the laptop's power adapter is connected or disconnected.  When the power adapter is connected, the laptop has "unlimited" access to energy from the wall outlet (like the desktop), so maybe the USB ports stay at full power all the time.

  • IPod 5th gen not charging

    Hello guys. Today I connected my iPod 5th gen to the charger and I noticed it wasn't charging. This started today. Someone please help me. I appreciate every tip and help I recieve.

    Hey Suhey, first inspect the charging port, your looking for foreign debris, lint, dirt etc. anything that could be blocking an electrical connection, if you see something try to carefully remove it. Just be careful not to touch or bend or damage the pins. If you must use a wooden toothpick to remove any foreign debris from the port and inspect the port for visible damage, cracks, missing pieces, etc. If not the issue, then try a different cable. The lighting cables have a history of breaking, shorting out. They will look just fine, but not work. If not the issue with the new cable try a different charging device. If still not working, attempt a reset, press and hold both the power and home buttons until the Apple logo appears, about 10 seconds +/-, then release both buttons.  If you can still turn on your iPod go into Settings>General>Reset then tap Reset All Settings. If still not charging connect to your computer and make backups of the stuff you have on your iPod then Restore from Backup last resort, Restore to New. If that doesn't work try letting your iPod drain completely, go dead then attempt to charge. If still not working, contact your Apple store or Apple Genius Bar and have your iPod evaluated. Good luck, Cheers.

  • IPod fifth gen. not charging neither connecting to computer

    Hi, I have an iPod 5th generation 30gb and it isn't recognized by my computer.
    It isn't charged.
    iPod 5th gen. 30gb black   Windows XP  

    I am having the exact same problem. I have a dell Latitude D510 running XP pro. Please help. My daughter will be traveling to perform in the Rose Bowl Parade this year and it has become at must fix! All I have is a blank screen (dark) as though it is off. I just replaced the battery, thinking that was the problem. That did not change anything.

  • IPad 3rd gen not charging via wall socket

    Ok I'm really annoyed right now, my iPad 3rd gen has suddenly decided not to charge when plugged via adapter to the wall socket. I thought it was the cables fault so I went into the currys store and bought an apple charger, came home and I have the same problem. When I plug my iPad to the wire to charge the battery sign flashes between between charging and not charging and then I get a message saying maybe this device is not compatible with the iPad and now I just keep getting the message saying "not charging". So I plugged the wire to my MacBook and yay the iPad charges, but its a little bit inconvinient for me and I prefer charging via the wall socket. I've tried everything resetting etc I've even done the software update (ios7.1). Can someone please tell me what's going on, am I doing something wrong? Any help would be appreciated! Oh I've also ordered the apple 12w adaptor charger, do you think this will solve the problem? Thank you

    You, say, " I thought it was the cables fault", but then you say, "I went into the currys store and bought an apple charger". Did you buy a charger or a cable?
    The problem could be the charger. If so, the new 12W charger should solve the problem.

  • Ipod 3rd Gen. not responding. HELP!

    I got a 3rd gen ipod. I it works fine when it is connected to my computer i can see it charging, play music and stuff. but when i disconnect my ipod to the computer and unplug the cord. its just total BLACK i hold the middle button and menu. nothing. (WINDOWS 8 user.)

    - First try resetting hte iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to your computer and restore from backup
    - Then try restoring to factory defaults/new iPod.

  • Why does my iPod(3rd gen) say charging is not supported with this accessory even though its not plugged in?

    I was eating breakfast one morning playing a game on my iPod and it slipped out of my hand and into my cereal bowl. So immediately I took off the case and put in a bag of rice for a day and a half to let it dry out. Then when it started working again (thankfully) a notification popped up saying charging is not supported with this accessory after I unplugged it from the wall. So I thought nothing of it and pressed dismiss. Now when ever I wake it up, instead of my wallpaper popping up in the lock screen that stupid notification does. How can I get rid of it? Also my home button doesn't work anymore so I have to use asisstive touch instead. How do I take a screen shot without the assisting touch menu in the way? Thank you.

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price

  • IPod 3rd gen not working

    I reseted my iPod and now it isn't opening. I tried charging it normally for 2-3 hours and it didn't work. After, I tried putting it on the computer and the computer said that it doesn't recognize the usb driver. I tried holding the home and power button and it didn't change anything at all. I don't know what to do. i would need help. Thank you

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Help Ipod 5th Gen not charging! :(

    i have an ipod 5th generation and my charger is playing up (what a suprise)
    when i plug my charger into the plug socket and to my ipod my ipod turns on, but it does not say that it is charging and then goes off within 10 minutes this does this over and over again everytime i plus my charger into my ipod 5 i really need help!

    If that doesn't work then try a hard reset it doesn't actually reset it but it will fix it hopefully
    Step 1 DONT HAVE IT PLUGGED IN UNLESS YOU WANT IT JACKED UP
    Step 2 Press and hold BOTH Power/Sleep and Home buttons for 10 seconds
    Step 3 Reply, if it works go to Step 3-A if not goto Step 3-B
    Step 3-A Click "This solved my question"
    Step 3-B Reply with what happend
    Step 4 IRL-LOL

  • Ipod 3rd gen notes issue

    My 3rd generation ipod touch screen had shattered, and I can no longer see anything on the ipod. The ipod sync and plug in with the computed still work fine. I really need to know how to get my notes off of my broken ipod and onto my computer. Please help me.

    Oh my gosh i cannot figure out how to put notes onto my iPod and you say that you do, could you possibly tell me how? There isn't even a notes section on my iTunes when i plug in my iPod.

Maybe you are looking for

  • What is a good billing program that won't delete my charged work!?

    I have been using iRatchet (the same program as MacFreelance under a different name) and it has recently been changing my billed numbers on it's own. I will let the timer go for a certain amount of time and then iRatchet will just lower the price on

  • Why is my iTunes in dollars?

    Why is my iTunes in dollars?

  • Simple IP Phone Service Issue

    I am developing an IP Phone Service. I am creating a IPPhoneTextObject and have added several soft keys. This works fine, however, on the phone (7945), If I push one of the soft key buttons, the phone displays: "That Key Is Not Active Here" Anyone ha

  • Unable to Ping IP when using route redistribution

    Hi Everyone, I have below setup R1 is running EIGRP and connected to R2 via EIGRP R2 is Running OSPF and connected to R3 via OSPF. R2 is doing the redistribution of eigrp to ospf and vice versa. R1 config interface FastEthernet1/0/1 ip address 10.1.1

  • Is there an ap for finding/deleting corrupt files on OS X 10.7?

    I seem to have a corrupt file(s) which cause my MacBook Pro to freeze inexplicably (and randomly) upon start-up. I've been told that this is a symptom of having a corrupt file. Is there an an for finding/deleting corrupt files on OS X 10.7? I'm prett