Old Ipod classic 160 gb wont get past battery charge screen has been sitting for months

I have an old Ipod classic 160gb,that has been sitting for a long time so im sure the battery has no life in it at all,im charging it via usb cable and it wont get past the battery charge screen,how long would a completely dead battery take to move off the charge please wait screen untill you know its a deeper issue at hand if so how would you get it to start up pass the charging please wait screen?to see the true issue?
Thanks for your help
Ice

Try to do a reset and see whether it can be solved
http://support.apple.com/kb/HT1320?viewlocale=en_US&locale=en_US

Similar Messages

  • Is there a bluetooth adaptor for an old iPod classic (160 GB) that also works like a radio remote?

    Is there a bluetooth adapter for an old iPod classic (160 GB) that also works like a radio remote?  I have a bluetooth headset and I want to listen to FM radio on my iPod.
    Or is there a better way than to use an adapter in order to listen to  the radio on an iPod with a bluetooth headset?
    TIA!

    Have you updated your iPod and iTunes sofware?
    most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like  iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
    most likely it is an incompatible song format, read this Apple support article.
    http://support.apple.com/kb/HT1334?viewlocale=en_USet
    If  your iPod software is version 1.1.2, then you have to use lower quality format.
    Can you select the problematic song, and Advance -> create iPod version

  • My macbook pro wont get past the grey screen at startup. Help!!

    After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried booting from the original DVD but it still freezes. When I boot it in verbose mode it seems to stop at "jnl: unknown-dev: update_fs_block: error reading fs block # 3597880! (ret 5)", the Apple AHCD Disk Queue manager :: set power state is timing out and there is a disk I/O error. I have tried to reset the power manager (not sure if it worked or not) and I have also tried clearing the PRAM (again, not sure of that worked). When I try to look at the hard drive using target mode on my imac the hard drive doesn't come up but the DVD does. I'm concerned that my hard drive is fried. Any suggestions?

    It would help to state in your post which remedies you tried that didn't work.
    Start here >  OS X Lion: If you see a gray screen at startup
    If nothing there helped, try Starting up in Safe Mode
    Safe Mode deletes some system caches that may help.
    A Safe Mode boot takes longer than a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
    If a Safe Mode boot didn't work, since your Mac has OS X v10.7 installed, restart your Mac while holding down the Command + R keys so you can access OS X Recovery built in utilities. The startup disk may need repairing.
    Tip:  Hold down the Eject key while starting up your Mac to eject a disc.

  • I cannot install flash latest player it doesn't get past 25% and I have been trying for weeks.

    I cannot install flash latest player it doesn't get past 25% and I have been trying for weeks.

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • HT1212 I can not unlock my sons Ipod, and it does not ask for a code, not that he remembers it now.  It has been locked for monthes, and dont know what to do.  Can you help

    Trying to unlock my sons ipod and he doesnt know what his password was.  It has been disabled for monthes.  Cant get it reset with itunes apple.  And doesnt even ask for a passcode anyways.  It just isnt doing anything.I have beentrying to unlock it for 2 hrs already

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading.

    My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading. I don't need the song. But I want the others to download.

    Hi there,
    You may find the information in the articles below helpful.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    -Griff W. 

  • I have done a hard boot and restore several times to my ipod touch.  I cannot get past the white screen.  Any suggestions?

    I have tried to do a hard reboot and restore several times to my ipod touch.  I cannot get beyond the white screen.  Any suggestions>

    If you successfully restored the iPod to factory settings/new iPod (went through all the steps without errors), then time for an appointment a the Genius Bar of an Apple store.

  • POWERBOOK G4 14 1.33 WONT GET PAST THE APPLE SCREEN

    I have a powerbook G4 14 inch 1.33 mhz processor with 256 mb of ram. The screen will not get past the apple screen. I have tried 3 seperate hard drives none of them would boot past the apple screen. The disk drive is broken, I will be replacing it shortly to put a OS X CD or disk warrior cd in it. Does anybody know what would cause this? I reset PRAM, PMU and tried booting in safe mode. It gets to the apple and then the little circle spins and spins and it doesnt load..

    Heres some history of the computer. I orginally put a 12 gb hard drive cuz it came with no hard drive in it and it was working great, but then became slower and slower until it got stuck on the apple screen. i tried 2 other hard drives and they didnt work. i then replaced it with a brand new 60 gb hard drive. i also bought a new optical drive and put that in because the optical drive never worked. i have tried two different ram sticks. i have tried pressing shift,c,option none of that works. option makes it freeze on the boot screen. open firmware works...command S did work until recently...command v does not work...reset pram and nvram. reset PMU. I AM AT A LOSS. is there something i forgot to leave connected during the process that could be causing this? I get USB BOOT ERROR 0 1 1 in open firmware. I DOUBT its the logic board, because it makes the chime and I can get into open firmware and the start up screen.

  • Reset the password when trying to connect to my wi fi? The password keeps saying its incorrect when I know its not, all my other wireless devices connect no problem and this has been ongoing for months now and im getting a little pi**ed off now

    when i try to connect my ipod touch to my wireless network, its keeps saying the password is incorrect-this has been ongoing for several months now even though it used to connect when I first bought the ipod-is there anyway to reset the password?

    All devices should automatically reestablish a connection after power cycling the router.
    Also try resetting your iPod.  Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try:
    Apple - Support - iPod touch - Wi-Fi

  • Photoshop Elements 10 Trial wont get past "accept license" screen.

    Hi
    On a Mac. OS: 10.6.8
    Have downloaded a trial version of Photoshop Elements 10.
    Tried launching it.
    Get a window asking me to accept the license for Elements Organizer.
    Click accept.
    Window disappears.
    Window reappears - again asking me to accept license for Elements Organizer.
    Click accept - window disappears when I click "Accept" - then just reappears, etc...
    Can't get past this window.
    Uninstalled the software.
    Re-downloaded it.
    Exactly the same thing.
    Tried the online chat-help thing.
    Waste of 15 minutes.
    Was sent here.
    (Just a thought, but I previously had a trial version of elements 9 - but uninstalled it - could that be messing something up?)
    Thanks

    This forum is for Adobe Digital Editions software, not Photoshop.....
    ===============

  • My ipod classic (160 gb) wont connect to my itunes.

    ive downloaded the latest update of itunes, and when i plug my ipod in it says on the ipod it is connected but does not show up in my itunes library. I had to reset it to factory settings yesterday , would this have anything to do with it?

    Thanks for the info, I see that all software are uptodate.
    Try the Hard reset on the iPod
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If this doesn't help, try a Restore/Update the iPod software.
    if your music is MP3, then google "MP3 validator", download and  then run it, this will fix the ID3 tag coruuption, which causes the song skipping.
    Good Luck!

  • URGENT, Phone wont get past start-up screen and iTunes doesnt see it

    My 3.0.1 problems just got WAY worse!!!
    After the 3.0.1 update I started having the same issues as everyone else until today. I noticed that my clock was just picking a random time( hours and minutes were off) and would not take to my manual setting of the time or on auto. So as i have been doing several times throughout the day, i performed a hard reset. Only this time it never came out of the reboot/start-up apple symbol screen. I then attempted to perform the hard restart several more times to no avail. I am now stuck with a phone that will not boot nor can i connect it to my computer. While connected, iTunes does not detect it and i can not do a restore either. any suggestions would be great but i fear for the worst!!!

    Try to connect in recovery mode and restore: http://support.apple.com/kb/HT1808
    If you can make it, restore "as new iphone" , maybe your backup contains corrupt files and these would be copied back using the "restore from backup" function.

  • My imac wont  get past the white screen with logo and rotating wheel

    i was trying to turn on my imac when suddenly ot took forever on the white screen
    i tried taking off everything connected to it-no change
    i tried a safe mode after a few minuted a heard the second chime then a blinkin
    question mark folder showed up so i turned it off again and tried a nvram/pram reset but it still stuck on the white screen
    is it time to visit the apple store or is there something else i should try?

    A flashing question mark or globe appears when you start your Mac
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Imac wont get past white startup screen after updating today

    Downloaded new updates today for lion from software updates from Apple menu. Computer restarted and sat on white screen for a long time. 20 mins or so. Seems somewhere after 20 mins we had a power failuer and everything went out. Tried to restart my iMac after power was back on and it just hangs on white screen with apple and gear rotating for over 40 minutes. Nothing seems to work.

    A flashing question mark or globe appears when you start your Mac
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Display hard to close and wont get past initial boot screen - turns off

    I didn't drop it and if someone else did, they won't fess up. It doesn't look bent anywhere.
    I turn it on, it has grey boot up screen with apple and rotating timer thingy. The hard drive is noisy like it is in a constant read mode and then it just turns off.
    I would suspect the HD is shot, but why is the lid hard to close now? Any thoughts greatly appreciated.

    Bring it to an Apple store or authorized Apple repair center.

Maybe you are looking for

  • How do I enable multiple dynamic drop down boxes?

    I'm using Windows 2000, Java SDK 2 Standard, Tomcat, Apache, Microsoft Access and Macromedia Dreamweaver Ultradev 4. With UltraDev I'm trying to create a jsp page that has more than one dynamic drop down box or more than one dynamic select list box.

  • Regarding ship to party and sold to party in invoice.

    Dear experts, I ve created an smartforms for generating invoice using table vbrk, vbrp, kunv and kna1, t001w and etc. But thing is that i am not able to retrive data from field VBRK- KUNWE. iT SHOWS ERROR THAT KUNWE is not in newer version. Please gu

  • PDF Printing with FOP 0.94

    Hi, are there any examples about printing apex report with FOP 0.94? Thanks, Sergio

  • Report selection screen values defaults to previous selections

    Hello BW experts,    Hope all doing well.  We are using BW3.5 . Recently upgraded  from patch 18 to  20. When we run BW report with certain selections in the selection screen, for ex : Fiscal year 2007. And run a diffrent report which has Fiscal year

  • Problem installing acrobat reader

    I have attempted on several occasions to install acrobat reader to an HP Elitebook running Windows 7 Professional.  Each time I get the same error message: Any ideas?