Old ipod nano - when i connect it to my imac - error message
I have an old iPod Nano - when i connect it to my iMac, I get an error message that says I can't have more than 5 computers authorized with my account - My account only shows 4, but that's really beside the point since this iMac is already authorized and I sync other devices from it. Any suggestions? It won't let me add any new content to this iPod.
See Recover your iTunes library from your iPod or iOS device.
tt2
Similar Messages
-
please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.
there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit. -
Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..
First thing i would try is to use another cable if available.
-
My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already
It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/
-
Ipod Nano won't start - folder w/exclamation point error message!
My Ipod Nano won't start! I got it about a year ago and whenever I try to turn it on, a folder with an exclamation point and the words, "www.apple.com/support/ipod" come up. I've tried to get it to work but it's not. I even tried looking in the help sections on apple.com and everything I found didn't help. My Ipod isn't frozen, I just can't get it to the menu screen. I really don't want ot have to reset my Ipod and have all my previous songs and pictures erased because I can't get them back. Does anybody have a possible solution to this problem? Please help.
~Bre~
Ipod Nano Windows XP 2 GB
Ipod Nano Windows XP 2 GBHere's a few that weren't posted too:
Check these out:
iPod Folder with Exclamation Point After Disconnected From Computer
Put iPod into Disk Mode Manually – Worked for Me!
Good Thread About iPod Sad icon/Folder with Exclamation Point
I hope this helps! -
When i connect my ipad2 to sync, error message says ipad itunes version needs updated
when I connect my ipad 2 to my mac to sync an error message says my ipad doesn't have the latest version of itunes. When i try to update my ipad, i can't....help
It would be good for you to provide a little more information for us.
What version of the iOS is on your iPad? Did you update to iOS 6?
What version of OSX is your Mac running?
Did you update iTunes to version 10.7
If you have iOS 6 on your iPad you need to have iTunes 10.7 on your Mac before you can sync. iTunes 10.7 requires Mac OSX 10.6.8 (Snow Leopard) or higher.
If you have iOS 6 on your iPad and a version of OSX below 10.6.8 you'll need to update the OSX first, then install iTunes 10.7. If your have OSX 10.6.8 or higher you can just download and install iTunes 10.7.
It would e a good idea to back up all data on your computer if you have to do an update of OSX. -
While downloading iOs7 on my iPhone 4 stopped with a screen indicating it needed to connect with iTunes. I can turn the phone off and on, but the screen with the iTunes and plug does not change. I tried connecting to my computer with iTunes open and the computer message indicated that the phone was in recovery mode. Any suggestions?
Yes. Plug it into your computer and restore it. Once it's in recovery mode, that's your only option.
-
NEW IPOD NANO WILL NOT CONNECT CORRECTLY TO 2011 KIA SPORTAGE
Have a new Ipod nano. when I connect it to 2011 Kia Sportage it does not display the song list correctly. Have cable that Kia sells and it worked with my old Nano but not not the new one. Same results with cable that came with new nano. Help please
Alternatively, you can always use a double ended 3.5mm audio plug and just manipulate the playlist via the iPod and not the radio.
-
My ipod touch broke then replaced it with a new one. I already dloaded iOS5 on the old one. When I connected my new unit it says it won't load the previous back because the new one is not up to date... Do I really have to download iOS5 again?
Yes, you have to update the iPod in order to retore from backup. The iOS on the "new" has to be aequal to r greater than on the iPod from which the backup was made. The iOS downloads are unique to an iDevice and model (the one for a 3G iPod will not work for a 4G iPod).
-
My 4th Gen iPod Nano isn't displaying a "Use iTunes to restore" message, but iTunes is displaying a restore message when I connect it. I have original music that I can't back up on my iPod. Is there any way that I can fix the iPod without restoring it?
It's not designed to work like this. When you sync, the iPod stores some information that basically says 'this iPod belongs to computer xyz'. Apple did this to prevent copyright issues (syncing someone else's music).
If you really want to do this, you'll have to at least tie both iTunes installations to the same account. Maybe have them sync with each other. -
I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library
I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?
-
I am planning on purchasing an ipod classic to replace my old ipod nano. I am just wondering if i am able to plug it in to my itunes, and everthing will be transferred onto the classic simply? Or will it automatically delete all my songs as it will not recognise the classic? Also, will it inform me what to do when i plug the classic in, to set it up?
If you want to have the photos stored on an external HD, you probably should move them there in your operating system before you import into Lightroom.
But, if you don't yet own an external HD, you can import from the internal hard drive and later move the photos to wherever you want them to be, as long as you do it properly. -
My Ipod nano, when connected to HiFi thru RCA cable, cuts out until I disconnect it and start again.
have u used the CD that came with the iPod because that does a lot for helping with reconization of the iPod.
but your biggest problem is that your using a Pentium not mention Windows and Acer! are you that cheap???
I'm going to get an iBook G4 buy December because their cooler processors(don't say a thing about speed because that would make you technologically challenged) and their wonderful OS that doesn't crash unless you find a way to make it and reliable software. -
Ok. My brother has an old Ipod nano. It's the tall one with the tiny screen. Anyway, he tried to turn it on one day and it just flashed white and then went black again. We tried everything we could and it still wont work. Now it wont flash unless it is plugged up to the computer. How do I fix it so it will work again?
Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn
Maybe you are looking for
-
Images NOT visible in the Library using Lightroom 5.2 [CC]
I am using Lightroom 5.2 and only gray squares appear in the Library mode. How can I get my images to appear ? A couple of additional details are: I have my images stored on external portable HD drives. I have been successful using this set-up on a
-
How to Bookmark in Flash Application
hi iam new to actionscript ... and our team developing lms using flash ... pls help me how to book mark the flash content inside flash application....
-
How do I edit FrontPage sites with Dreamweaver 8 without messing them up?
I have to edit a friend's Front Page site using Dreamweaver without messing up her ability to publish also. I'm running Dreamweaver 8.0. I already installed an extension for dreamweaver mx called "Import Front Page Site Wizard for Dreamweaver" but it
-
Hi , I m using currency field in smartforms. it puts some blank space in currency field. how to remove it. like: i m using wrbtr field type of currency. value of wrbtr is 1,909.00. but in output it prints like Rs. 1,909.00 how to
-
Hello all, I've found some documents about creating and enhancing Hierarchies and categories in MDM repositories, but I still haven't understood if (and how) is possible to modify a hierarchy (from an xml file coming from SRM) even if there are recor