Old mail keeps being delivered over and over and over
Hi, I am new to this forum. I have a Bold 9700. Ever since Aug 7th (today is the 11th), I have been receiving the same 4 or 5 emails over and over and over on my Blackberry. I deleted them on both the handheld and email...that didn't work, I opened them, then deleted them, that didn't work. The emails are not on my server, I do not get them in my email inbox on the computer, yet probably 6 ot 7 times a day, I get those same emails over and over and it won't stop. Any ideas on what to do? Is it a Blackberry problem?
Thanks in advance for your repoly.
You're about the 6-7th person I know this happened to, including myself, from the same original time period, starting this past Sunday morning.
Can I get you to check the RefID of the message: Open the message hold down ALT and type VIEW.
Then delete the messages and when they re-appear check the RefID's again to see if they are the same.
I don't need to know the RefID, just if it is the same.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
MY BROADBAND HAS BEEN REDUCED DRAMATICALLY IN MY HOME NETWORK USING MY AIRPORT EXTREME BASE STATION.
THIS HAPPENED SO UNEXPECTEDLY OVER THE WEEKEND. I CALL MY ISP AND THEY SIMPLY TOLD ME TO ELIMINATE THE AIRPORT
EXTREME BASE STATION TO CONFIRM THAT WHAT I HAVE PURCHASED IS BEING DELIVERED WHICH I DID AND CONFIRMED.
MEANWHILE USING MY NETWORK UNTIL LAST FRIDAY EVERYTHING LOOKED JUST GREAT.
I WONDER WHETHER I WOULD HAVE TO RESET MY AIRPORT EXTREME TO FACTORY SETTINGS TO RECONFIGURE IT.Hmm. Your ISP is incorrect in telling you that removing any of your routers on the local area network will have anything to do with the bandwidth performance that they provide you at the Internet modem. On the other hand, changing/removing networking equipment on your local network DOES affect bandwidth performance on that local network.
Most likely what the ISP is asking you to do is verify that you are getting their promised download/upload bandwidth at the modem. It appears that you did that and verified that you are getting the stated bandwidth.
So, we should take a look at why, when adding the AirPort Extreme, you are getting less.
First off, which AirPort Extreme model do you have? What is the make & model of the broadband modem that your ISP is providing you?
It is always a good idea to perform a complete power recycle of your networking equipment when introducing new hardware. Please check out the following AirPort User Tip for details.
(p.s. Please don't use all capital letters when you post. It appears to readers that you are shouting. Thx!) -
E-mail not being delivered - AGAIN!!!
This *****!!! You guys are really ruining my e-mail ability...since I do pay for this service!!! Stop blocking my e-mail! I'm really ******!!!!
This is the second week my e-mail has been rejected by the server and I've not been able to finish sending out my mail to people. I organize a class reunion. I e-mail about 200 people once a week. For some reason there was a change to a setting somewhere along the line and 2 weeks ago my mail stopped being delivered. I stated in my last contact that I would switch to a free service that would allow me to send my mail. I don't use all the .Mac services and I can get web space much cheaper.
Either fix this or consider me (a member for 4+ years) cancelled. I don't have time to write to you guys every week about this. Did I mention I was ******?
[email protected]
It's not like I am sending out huge files or something like that. See below.
This is what I am sending.
Hello Class of 1992,
Okay, you can stop waiting now. You've got to make your move and send in your money for tickets. Get them before the May 15 deadline and save yourself $40 dollars!
I've heard from so many of you over the past 5 years of working on this project and there has been a great deal of interest over this period of time. So...here we are...it's almost happening and you need a ticket to get in the door.
We had a meeting this weekend in the space rented for the 15 year reunion and we've got such a great location chosen for you guys. We'll be right on the beach which we have access to during the day for those who want to show up with coolers and beach chairs to relax, meet and greet. Bring your kids, spouses and spirit of fun to the afternoon beach time.
You are going to have a great time during the evening. We've got plenty of food available, drinks, music and how many reunions do you know of that have a tower to overlook the entire beach at their disposal?
It's gonna be awesome! And guess what...YOU ARE INVITED!!!
Get your ticket ordered early....save some $$$ and start off your summer right with old friends, fantastic times and new memories.
For a single person it's only $85.00 dollars. If you bring your spouse or date; only $125.00 per couple. And heck, if you've got anyone else you'd like to bring it's only $45.00 for each additional person. You can't beat it for an awesome time.
Make your check payable to Bill (Billy) Owens (Reunion Treasurer).
Mail to:
3765 Silina Drive
Virginia Beach, VA 23452
See you on June 16!
www.kempsville1992.comParsing through your rant which isn't directed at Apple, it seems you might be exceeding the sending limits included with a .Mac account which are not extreme by any means so take a deep breath and calm down.
All internet service providers and email account providers (even free ones) have sending limits or restrictions for non-business/personal email accounts.
These restrictions are in place as part of an overall effort to prevent spam emanating from an ISP's or email account provider's domain. In case you aren't aware, spammers make use of bulk spam mailings and these restrictions make it more difficult for a spammer to do his thing.
It makes no difference that you aren't a spammer or the content of your message is not spam since there is no way an ISP or email account provider can make this determination when you send a message but they can impose sending limits or restrictions.
Copied from the following link.
http://docs.info.apple.com/article.html?artnum=25301
.Mac has several safeguards in place to ensure that only .Mac members send messages with the Mac.com outgoing mail server. Among them are reasonable limitations on:
* The number of messages that can be sent each day (200 messages)
* The number of recipients that can be sent to each day (400 recipients)
* The number of recipients a message can be addressed to at one time (100 recipients)
* The size of outgoing messages
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.
.Mac Email has been designed primarily for personal use. Sending unsolicited bulk email messages through the .Mac email server is prohibited.
If your message is being rejected by a recipient's incoming mail server, what is the return email error message provided which is sent by the recipient's incoming mail server?
Regardless, this problem is with the recipient's email account provider. If the return email error message from the recipient's incoming mail server indicates the recipient has exceeded their allocated server storage space, this the recipient's problem.
So instead of ranting, how about providing more detailed information about the error message provided so someone here can help narrow down where the problem lies so you can direct your efforts there.
IMO - since you use your .Mac account for email only, you should cancel your account but keep in mind that even a "free" service includes sending restrictions which may not be identical to .Mac account restrictions but none are restriction free. -
All, Im stumped. In fact I have been on the phone with Apple Support and this has been escalated to the top engineers, as I think its got them too..
Anyway, here is my problem..
I'm running an Mac Mini with OS X 10.7.4 Server. I have had mail running on it for 2 months or so, without any issues. The mail was actually migrated from 10.6 in March, and It actually went smoothly. I have 3 domains which all recieve mail and they all work (or did up until 2 weeks ago)..
So the story is this.. I can send mail from my domains, without issue. imap and dovecot must be working.. cause all the stored mail, can be read with the mail IMAP client.. I can even transfer mail messages from one mailbox to another with Mail client. Sending mail is a breeze, it still works and the recipients still recieve their mail. But I noticed I wasnt getting any mail at all from those mailboxes... no mail, no spam, nothing.. which is unusal. I fired up Server admin and checked out the SMTP log, and this is what it showed for every email recieved: (xxxxxx is just me hiding sensitive info)
Jul 21 14:25:20 xxxxxxxx postfix/postscreen[65857]: CONNECT from [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/postscreen[65857]: PASS OLD [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: connect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: warning: restriction `reject_invalid_helo_hostname' after `permit' is ignored
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: NOQUEUE: reject: RCPT from nk11p03mm-asmtp994.mac.com[17.158.233.225]: 451 4.3.5 Server configuration problem; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<nk11p99mm-asmtpout004.mac.com>
Jul 21 14:25:28 azathoth postfix/smtpd[65858]: disconnect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Ok, now what is odd, is these rejected messages are not even appearing in the mail queue in Server Admin. I have no idea why there are not being delivered
Ive checked my postfix main.cf file and master.cf files they both look ok.. Ive even replaced them with the main.cf.defualt.10.7 and master.cf.default.10.7 files and to no avail... same problem..
So in summary
I can send mail out
IMAP is working on the client end (thus dovecot is) exsisting stored emails can be accessed, read, moved unread etc..
mail is coming into the sever, but its being rejected. there is NO rejection email sent back to the sender.
mail is recieved by postfix, but cyrus isnt doing anything with it.. I have no idea where it goes...
Could anyone shed light on this...
my main.cf file:
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
azathoth:postfix root#
azathoth:postfix root# less main.cf
azathoth:postfix root# more main.cf
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint. -
Old mail keeps coming back? & Junk Mail Delete grayed out.
Issue 1
Old mail, dated from previous months, keeps appearing, mainly in Trash.
I read some Discussion about 'ipurge,' -- I tried it as a Terminal command but said it wasn't there.
I checked with the mail server - Google -- and the emails are not there...
Issue 2
Also, on Mail menu>Mailboxes>Erase Junk Mail is grayed out.....and maybe this happen after starting to use a spam filter (SpamSieve).
I sure wish I didn't get so much spam. My email address must have recently gotten picked up...it's disgusting.ONE DAY LATER -
From another thread I got the idea to check out these ever returning trashed emails. The idea there was to delete Google's Junk folder.
Did that but it didn't seem to solve the problem although the idea of investigating the Google Mail Server.
That led to discover that after clicking on Trash/Delete for emails they went into a Trash folder -- and stayed there -- and a 2nd trashing was necessary and there was a tab/button saying: DELETE FOVEVER, which sort of implies that Trashed items hang around and require this 2nd trashing, with clicking DELETE FOREVER (see photo).
I'll see what happens over the next few days. -
A lot of my normal mail keeps being filtered to rubbish folder.
I move the mail to my normal inbox and the same recipients mail keeps filtering to rubbish all the time. How do I fix this?
Are you referring to mail being marked as spam and moved to the Junk mailbox? If so, your spam filter is, for whatever reason, considering legit e-mail to be spam. Go to the Junk mailbox, select the mis-marked messages and click the Not Junk button. If you keep doing this, Mail's spam filter should adjust eventually. You could also go to Mail -> Preferences -> Junk Mail and make sure that it is set to exempt messages from people in your Address Book, and make sure that those senders are in there. Alternately, you could just reset the spam filter and start re-training it from scratch.
-
I have my Mail blocked for scrolling. I am a new user of ipad2, started the Mail this morning and nos it is blocked. It keeps being updated, but i cannot touch it. And i can touch normally other applications. Any heló appreciated.
Quit the mail app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Mail keeps trying to send the same email over and over
I tried sending an email, but it was too big to send, but not matter what I do, it keeps trying to re-send it anyway (even after deleting the message), it says:
"Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “On My Mac” in “On My Mac” so that you can complete the actions while online.
Additional information: The connection to the server “imap.aol.com” on port 993 timed out."
And I now have 5 of the same email in my outbox.
please help!
thanksYou may have better luck posting this in the Leopard Mail forum:
http://discussions.apple.com/forum.jspa?forumID=1223 -
Voice mail not being delivered
Cisco Unity 4.0(4):
Error message stating:Event Type: Error
Event Source: CiscoUnity_UMR
Event Category: UMR Thread Error
Event ID: 137
Date: 10/6/2008
Time: 12:26:46 PM
User: N/A
Computer: COBUNITY1
Description:
Attempts to deliver Unity Message Repository messages have failed due to Unity configuration or connectivity issues with the Partner Mail Server.
AvUMRSyncSvr will suspend message delivery for 300 seconds, after which message delivery will be attempted again.
During this outage, messages may accumulate in the temporary store. 0x00000F58
All the undelivered messages can be found in UnityMTA folder. Is there a service I can start and stop to get the voice mail moving out to the intended recipients?Actually the UMR service (AvUMRSyncSvr). Type services.msc under Run in the Unity service to access the services.
Also make sure that Unity is running, on the system tray check if it is up or on the services itself. -
my e-mails are disappearing after 1 week, but my deleted folder is empty. I have logged on to my web mail and it says all my folders are empty. No in box, sent or deleted. talktalk helpline was no help at all. can anyone help me?
first see what your server settings are.
how do you treat a deleted email.
second see what your inbox folder settings are
Do you delete messages older than 14 days? -
I have been having trouble signing on for several days to my email accounts. Everytime it asks for my password and the keychain box pops up. I retype it and it returns. I even went under mail preferences and changed it and it will not let me on. I have an iPad and an iPhone and can access it that way (so I know the password is correct) but not on macbook. Any help would be appreciated.
David:
Welcome to Apple Discussions.
+I set up an access code to the hard drive in order block the other user's access...+
Can you explain exactly what you did? That may help explain your situation.
When you try to boot normally, explain exactly what happens.
Have you tried starting up in Safe Mode?
Please post back with updated information.
Good luck.
cornelius -
It happens at least once per month that my account is disabled for security reason and I don't even have to change the password, I just have to go on iforgot web aite and enable it but it is very annoying since my iPhone stop synchronizing and doing backups
tinnt701 wrote:
... it said "This Apple ID has been disabled for security reasons",
See here http://support.apple.com/kb/TS2446
If necessary...
Use this Link > Apple Support iTunes Store Contact -
Emails are only being delivered to the WebOutlook inbox and not my desktop outlook
1. Big Problem: How do I get emails sent to my primary email address (name @ wealthblush dot com hosted by Go Daddy) to go to both the
Outlook Web App inbox AND the inbox of my desktop Outlook 2013? They only go to
Outlook Web App and not my desktop Outlook 2013.
How is the email account configured in Outlook (POP3, IMAP or Exchange):
POP/SMTP is for the user @ wealthblush dot com - this is the one where the email ONLY goes to the Outlook Web App, but not into Desktop Outlook 2013.
IMAP/SMTP is for the user @ charter dot net email. Emails go to both clients, but if I delete on one client it is not deleted on the other.
Exchange/ActiveSync is the outlook.com email and it only goes to my desktop Outlook.
I'm not getting any error messages. Mail is being delivered to the user @ wealthblush dot com, but only to Outlook Web App and NOT my desktop Outlook.
2. How can I change the inbox an email account puts incoming emails into? I read somewhere the way to do this is to create a search folder? This question is actually in advance of fixing
question number 1 above.
3. I don't know how I should configure my emails with the new Outlook 2013 now being in the cloud:
- I have an @ outlook dot com email I setup when MS came out with the free outlook dot com (hotmail), but I never used it because the reminders didn't work the same as in desktop outlook (not being able to snooze for a few hours
or days or weeks if I remember right and the way we get the alerts too).
- I also have an email with my ISP (@ charter dot net) which is a mix of personal and business emails. I've had this account for over 10 years.
- Finally, I have a business website (www dot wealthblush dot com) hosted by GoDaddy with one real email @ wealthblush dot com. I've already setup the aliases for several other emails in my new office 365 account (support,
sales, webmaster at wealthblush dot com) which are configured to pass into specific folders using Outlook 2013 Rules in my desktop outlook. I'm not sure if those rules are replicated into the office 365 account.
I still want the aliases to go into those folders like before.
4. In the case of my outlook.com email, they do go to both inboxes (on the web and desktop), but when I delete an email from one place, shouldn't it get deleted in the other place as well? How do I get them to synch?
5. And then there's my existing .pst files. I have 4 of them with old emails I've saved over the years that takes up just over one GB. I save these .pst files to DVD everyday so I can go back to look at something if I need to (and for hard drive
crashes). Does MS want me to import all that stuff to their servers and get rid of my .pst files? Does MS want me to put everything into one .pst file? It seems like it? If I do then I assume things need to be synchronized all the time between my file and
your .pst file? The synchronization process is as close as you can get to real-time, right? Or does each individual change get sent as it happens?
6. I also have a skydrive account from a while ago too. Is this where I should put my documents so they're accessible when I'm not at my desk? Now, that would be a LOT of data (probably close to 80 GB). Or, is the intention for us users
to only put certain current docs in this area. I assume these files can be synced with my desktop too, right? But I don't know how to. Do you keep old versions of the files in skydrive so we can recover them? I want to know if I can use your service to hold
my files (they would ONLY exist on your system and you'll back them up and I can get old versions back when needed).
7. Is an option to keep everything on my desktop 2013 like I did in 2010 of Outlook, bypassing the cloud and MS mail servers all together?
Sorry about all the questions, but I'm just getting the feel for your approach and need to decide how this all should fit together, do it, then go back to my business. I'm by myself at my company right now, but I'm planning on hiring a few people
real soon too so I need to keep this in mind. I've worked with Outlook since it came out, and I've configured it, but mainly only for myself and my family.R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support -
Solved Problem - mail not being sent and kept in Outbox....
I've posted a few messages here about mail not being able to be sent and kept in the Outbox.
It is solved. I believe.
Everything seems to be back to normal. I guess it was a problem of me over stepping limitations for .Mac e-mail, and getting locked out for a 24 hour period. So, I will be more care next time I need to e-mail large files to numbers of people ! Probably will invest in something like Stuffit and use there compression facility to reduce the size of files I want to send over the internet and via e-mail.
Thanks to those who took interest and gave advice.You don't have to invest in Stuffit.
Built-in compression is included with the Finder.
To compress files before sending them, use the Archive command in the Finder's File menu. Select the file or files you want to compress, then choose File > Create Archive.
A compressed archive of the files is created. If you archive a single item, the archived file has the name of the original item with a ".zip" extension. If you archive multiple items at once, the archived file is named Archive.zip.
Recipients can open the archive by double-clicking regardless the platform - Windows or OS X. -
My old username keeps showing up and it will not let me recover the old password
My old username keeps poping up the the cloid and it will not let me enter or give me the old passord even though some settings are working propely itunes ect..
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
If this is happening on your Mac, go to System Preferences>iCloud, sign out, then sign back in with your current ID.
Maybe you are looking for
-
The 10.10.2 update seems to have pushed all monitors on my Pro to full brightness (running two monitors). I don't se any brightness controls on the system prefrences panels for either display. Anyone else seeing this/any workarounds?
-
Doubts on interactive adobe forms regarding validations
Can we apply validation logic to an interactive Adobe form? Regards Cheenangshuk Das
-
I have recently changed over from Windows and been pretty happy with my new iMac.Sofar all is well,but now I realized that I like to have my machine protected from anybody else using it when I am not around away from home.In Windows I could password
-
How to install on a software raid with dmraid?
In linux 2.4 the ATARAID kernel framework provided support for Fake Raid (software RAID assisted by the BIOS). For linux 2.6 the device-mapper framework can do, among other nice things like LVM and EVMS, the same kind of work as ATARAID in 2.4. While
-
Why we use function module u0091SSF_FUNCTION_MODULE_NAMEu0092 in smartform driver p
Why we use function module SSF_FUNCTION_MODULE_NAME in smartform driver program?