Old problem kinda solved but now I got a CRC problem, begging for help.

I have kinda solved the problem I had in my previous post:
https://forum-en.msi.com/index.php?topic=84615.0
However now I have a new problem. I solved my other problem by moving the memories from the 2 green slots on the mainboard to 1 green and 1 purple. I started the computer and managed to ged rid of the bluescreen and the freezes but not without the cost of a new problem.
My new problem is that I get alot of CRC errors now when installing biggers things ( Like most games for example). Before I switched one of the memory sticks to purple I didnt seem to have these problems since I managed to install a few games ( Painkiller, warcraft 3 FT, battlefield 2 for example) but now with the sticks in green and purple Im having problems installing most games ( Got crc error on painkiller expansion, farcry, cold fear for example. however I got empire earth 2 to get installed).
Ive hard this problem could be cause of an faulty hard disk but Ive used both of the ones I have installed right now in my old computer and they worked perfectly there.
Anyone got any suggestion on what the problem can be?
I would get extremely happy if someone could help me fix this problem.
My system:
Gainward 7800GTX GS 256mb
AMD 64 3200+ 90nm venice
2X TwinMos Speed premium 3200 512mb cl2.5 winbond BH-5
MSI K8N Neo4 Platinum nForce4 Ultra
CD-RW
Tagan TG420-U02 i-Xeye PSU420W
+3.3V 28A
+5V 42A
+12V 22A

Quote from: Cane on 04-August-05, 12:09:22
However now I have a new problem. I solved my other problem by moving the memories from the 2 green slots on the mainboard to 1 green and 1 purple. I started the computer and managed to ged rid of the bluescreen and the freezes but not without the cost of a new problem.
My new problem is that I get alot of CRC errors now when installing biggers things ( Like most games for example). Before I switched one of the memory sticks to purple I didnt seem to have these problems since I managed to install a few games ( Painkiller, warcraft 3 FT, battlefield 2 for example) but now with the sticks in green and purple Im having problems installing most games ( Got crc error on painkiller expansion, farcry, cold fear for example. however I got empire earth 2 to get installed).
Ive hard this problem could be cause of an faulty hard disk but Ive used both of the ones I have installed right now in my old computer and they worked perfectly there.
Anyone got any suggestion on what the problem can be?
I would get extremely happy if someone could help me fix this problem.
My system:
Gainward 7800GTX GS 256mb
AMD 64 3200+ 90nm venice
2X TwinMos Speed premium 3200 512mb cl2.5 winbond BH-5
MSI K8N Neo4 Platinum nForce4 Ultra
CD-RW
Tagan TG420-U02 i-Xeye PSU420W
+3.3V 28A
+5V 42A
+12V 22A
What hard drive do you have?  Can you put these specifics in your sig.  Anyway, when games freeze after 20 minutes its either not enough juice from the power supply...(I have a tagan but its a 480w u22 with 12v@30a) OR, its high temps.  What are your temps?
Second, do you have "matched pair" of ram or did you buy them separately.
EDIT: What are your drivers for the video card too, are you using the latest ones from nvidia?
Quote from: TexasRudy on 05-August-05, 00:33:21
The manual does state to fill up the green slots before using the purple slots. I've noticed the memory dimms are fickle as well. I was having issues with the memory slots.
Put the memory in slots 1 and 3 first and see what happens.
TR, you will miss the benefit of dual channel, I made this same mistake but it is talked about greatly on this forum.  If you have matched pairs, then either slots 1&2 or 3&4 are the best combinations for dual channel.  Just my 2 cents.   

Similar Messages

Maybe you are looking for

  • Problems syncing back apps from my iPhone (coming from 2 Apple-ID accounts)

    Hi. I was previously purchasing my iPhone apps with an OLD Apple-ID. Some months ago I had to create a NEW Apple-ID (for reasons I'm not going into detail with). So far so good: The apps I had purchased with my OLD and NEW Apple-IDs lived happily tog

  • Efficient Way of Inserting records into multiple tables

    Hello everyone, Im creating an employee application using struts framework. One of the functions of the application is to create new employees. This will involve using one web form. Upon submitting this form, a record will be inserted into two separa

  • Windows 7 and NT 4 server - workaround

    There is reference on the Internet to folks who have played around with various settings related to security levels, encryption, SMB, etc. to successfully connect a Windows 7 computer to an NT 4 domain. which according to MS is not supported  I am al

  • Edit .VOB files? (dividing into chapters)

    Hi, I don't know if this is the right Discussions forum, but as I guess that iMovie or iDVD will be dependant on QT for this one, I thought that I should start here... I need to make a DVD out of some .VOB files. But those files are quite large and c

  • Playback artifacts with MOV files from GH3

    I have successfully played and edited MOV files from GH3 on this computer, but I suddenly (End of August) started having rendering artifacts in preview, after rendering in the timeline monitor, and on export.  I've tried several different MOV files w