Old problem with a new twist !

My Ipod mini is frozen on the do not disconnect screen (not flashing) I accidentally disconnected it without ejecting/stopping the device I have tried to reset it several times using the - toggle hold press menu/play - method and the 5 r’s method (except restore as itunes does not recoginse the ipod) with absolutely no joy. Its is not being recognised by itunes at all and when I connect the ipod to my pc (windows xp) a pop-up window says USB device not recognised due to a malfunction with device……please help!!

Leopard requires at least a Mac with an 867MHz or faster PowerPC G4 processor -- see the Minimum System Requirements section of Mac OS X v10.5.6 Leopard - Apple Store (U.S.) or just look on the retail box packaging.
According to your profile info, your Mac is an "iMac DV," apparently a 400 MHz PowerPC G3 model. Since that isn't even close to meeting the minimum system requirements for Leopard, & the installer disc itself runs a version of Leopard as well as installing it, it is no surprise that you get a kernel panic when trying to startup from the disc.
IOW, your G3 Mac cannot run any version of OS X beyond Tiger.

Similar Messages

  • I,m back with same problem with a new twist

    I contacted this forum about a month ago and didn,t get any useful advice and so my boot camp installation problem https://discussions.apple.com/message/19306599?ac_cid=op123456#19306599 is still unresolved. I have a new problem now ....I CANNOT GET PAST FILE REC LOCK ITEM WHEN BOOTING UP. I,ve tried a pram reset, safe boot. Booting from original osx snow leopard whilst holding 'c' button. I,ve given up hope of recovering my existing info and would be HAPPY if some wiseman out there could tell me how to do an erase reinstall. I have an IMAC mid 2011 2.7 ghz which I got end of dec 2011. I started on s leopard then lion and then mountain lion. I have file encryption set up with a file rec key I wrote down but it neither accepts it or declines....it just stays on the lock icon with grey background. P.S. If I boot up as normal I get to my login screen as normal. My usual username and password is accepted but it go,s to a grey screen from there and gets stuck and there are no error messages or sounds and nothing for me to click. The power button only works if I press and hold it. Just before this happened I verified and repaired disk permissions and spotlight was re-indexing for ages before it tanked mid process. IS THERE A ANOTHER FILE REC KEY I COULD GET VIA EMAIL RATHER THAN PHONE THE £35 SUPPORT PHONE NUMBER?
    Thankyou, peeps.

    I installed iOS 6 on my iPad 2 yesterday as well as the above stuff if that helps.
    Ta.

  • I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

    I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

    Check System Preferences > Sound > Output
    Make sure the correct device is selected.

  • How can I recover my old account with a new one?

    Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
    How can I get acces to my old account with a new Adobe ID?
    I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
    what can I do?
    Thanks

    Thanks Romshina
    I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
    now this is my new email, because the las one it was hacked and I just can't get back to it.
    So I would like to have access to my account and update this new email account, to have acces to my CC account.
    Thanks
    Date: Fri, 27 Dec 2013 06:51:15 -0800
    From: [email protected]
    To: <Removed by Moderator>
    Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
        Re: How can I recover my old account with a new one?
        created by Romsinha in Adobe Creative Cloud - View the full discussion
    Hi Guillermo Castellanos,
    Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
    Regards,
    Romit Sinha
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
    To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe Creative Cloud at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problems with the new Pages.

    Hi everyone.
    I wonder if i am the only one experiencing a little problem with the new Pages?
    My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
    Anyone else tried this?
    Martin.

    VladRO wrote:
    These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
    Instead of starting a new list, go to
    https://discussions.apple.com/thread/5468056?tstart=0

  • Is Anyone Having Problems with the newer version of Firefox?

    I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
    So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

  • Problems with Itunes New Version?

    Problems with Itunes New Version?
    Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
    <edited by host>
    Thanks,
    <edited by host>
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 1
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0

    There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • Problems with the new iPad and Joikuspot premium after iOS 6

    Hi,
    I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
    Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
    I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
    Finally the problem is 100% due to the iPad and the new iOS.
    disappointing, amateur for such a device... (iPad I mean).
    Any help?
    Many many thanks
    Vittorio

    Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
    vorrei ritornare a IOS 5

  • Problem with the new server UCS C220 for set IP to CIMC

    Hi
    We’ve a problem with the new server UCS C220.
    We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
    When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
    Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
    Note. The dedicated management NIC does not link, the other two ports do make link.
    What do you suggest to put an IP to CIMC and start installing our applications?
    regards

    You may have noticed that there is no DVD rom on the c220. What you need to do is:
    Login into the CIMC from your browser
    Luanch the KVM
    Insert the VMware DVD in your machines drive
    On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
    After the VMware OS installs press F2 to enter IP.
    Browse to the VMware ip to download the Vsphere client
    Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
    You can now upload OVA templates or manually create virtua machine from this enviroment.
    Hope this help

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • HT1212 How can I sync an old iphone with a new number to itunes. The new phone with old number is still syncing ok?

    How can I sync an old iphone with a new number to itunes as I am already running a new iphone with an old number??

    Thanks it just wont work needs a passcode but that code is for the new phone. Will go to Apple shop tomorrow.

  • Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

    Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

    If you are past the return date, you can sell the older iPad and put the money towards a new one.
    Plus, old iPads make great gifts ! ! !

  • I replaced my old iphone with a new one and i lost it i want the s/n of the new one

    i replaced my old iphone with a new one and i got it without the box today my new iphone is stolen and i need the serial number of the new one
    thanks

    Read here for the various ways to locate the SN:
    http://support.apple.com/kb/HT4061

  • Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    when I launch Photoshop CC, I get an error message
    and what exactly is the text of that error message?

Maybe you are looking for