Old Project Files

I currently have final cut pro HD, but found some old project files that I would like to re-edit that I created using Final Cut Pro 3. Unfortunately the project files just show up as a "Unix Executable" file and if I try to open them in FCP it says "Wrong Type". What can I do to update these project files so I can open them again?
Thanks
Dual 2Ghz G5 Mac OS X (10.4.7)

astella,
(1) This portion is not elgible for points: "When you are ready to quit this thread it would be an act of politeness and an aid to the health of this forum if you would award points to those who have been most helpful to you, giving the "solved starfish" to the one most helpful and the "helpful" points to the two next-most-helpful. Also, on your way out the door you should mark the thread as "answered."
If you do not know how to do these things, post again and someone will help."
(2) This portion is elgible, should you care to do so: "Software Architects, Inc., http://wwwsoftarch.com, has a product, GreatVideo! for Mac OS X, which is supposed to make almost any DVD readable by a Mac. I have used it to bring in DVD-R/W created by Panasonic/PC."
LM

Similar Messages

Will I lose my old project files etc with upgrading to FCP 2

Hi
I think after upgrading to Leopard with FCP Studio 1 not able to use compressor or DVD Studio Pro to burn. I think I need to upgrade to Studio 2 as my only logical answer without major problems. If I upgrade from 5.0.1 PowerPC version to Studio 2 will my old projects be moved over to upgrade no problem?
Thanks
Jason

Thanks for the reply guys! Do any of you see another solution to the problem of leopard and using the older apps? I guess it is better to start new after installing leopard. Lastly do I need to trash the old FCP 1 before install of FCP 2 or does it just upgrade it?
Thanks Jason

Delete bad mixes or old project files

I just started using the Garageband app on my iPhone. I love it! I'm probably overlooking something simple, but how do I delete files that I have exported. I did a few mixes of a tune that I want to delete. I can see them in iTunes, but don't know how to delete them. I'd like to be able to do the same for Garageband project files that I exported. Any help is greatly appreciated!

Highlight a file in the file sharing area. Press delete on the keyboard.
Yep, I too searched in vain for an icon or context menu, but delete does the trick.
tt2

Trouble updating old project files...

I'm running into mulitple issues trying to update an old project for a client....
The previous project was created in MX2004 and while trying to import the project into 11.5, I'm hitting all kinds of walls.
1. Previous developed integrated INM Impressario into the project, and from my research, it seems that may have been discontinued.
2. When attempting to update the movie and casts, Director is bringing up error messages "Problem writing...." and "Having trouble saving..."
Any help would be greatly appreciated.

I used the Impressario Xtra a while back with Director 11.5 without any major problems.
It seems likely that you trying to use version 3 when you need to use version 4.
You may need to remove the Impressario parts of project before updating and then redo them.

Advice before flushing drives of old project files

I'm sure it's a dumb newbie question but be gentle please. What's the difference, in terms of underlying files that must be retained, between a disk image, a QT movie, and Video_TS - Audio_TS ?
I'm done and just need to retain what is necessary to make another DVD if aunt Minnie loses her copy of the kids Christmas 1979.
The .mov is 13.9 gigs, .img is 3.4 gigs, no question about those, but its hard to determine a total for Vido_TS without knowing if it's free standing or requires other files.
Dual 2.0 G5 4GB ram Mac OS X (10.4.3) FCP 4.5 HD, QT 7, DVDSP 3, 900 mb assorted drives

John,
If you need to retain the working files for the project, if you will ever want to change anything on it ever again, then you should save your m2v files, menus, and whatever else you've included. You can try and back them up on a DVD or on a drive.
If all you want is the ability to create a duplicate in the event of loss or damage to the original, then you only need a copy of the DVD (yeah scratches are possibility) or the _TS folders (AUDIO AND VIDEO) copied to a hard drive.
To burn copies of the _TS folders from your drive, you can either:
1. Insert a blank DVD, drag the _TS folders to the disc and click burn.
2. Open TOAST, drag the _TS folders into the disc, click burn.

Need someone on PC to open and save Pro 1.5 project file in CS3

I am trying to salvage one of my old project files from when i worked on a PC. i can't do this because CS3 for Mac won't import old PC project files.
If anyone would be so kind as to accept my small project file and save it in Premiere Pro CS3 on their PC i would be much obliged.
-Dave

theaveragedave,
On the Mac, the Project file will *usually* appear without any file extension. Instead there will be one, or more, "helper/locator" files. These will usually be the filename, but with "._" (or similar) prepended to it. These are of no use to a PC.
All that I did was Copy the Project files to a new folder, and in it, added the ".prproj" extension. All opened fine. (Actually, since this was a pre-Pro version, I think that I added ".proj," but you would use ".prproj.")
If I were going to "convert" the Project, I'd gather up all Assets, keeping the folder structure exactly the same. Gather up the Project files (renaming, as is necessary), and furnish all of this to the person doing the conversion. This *should* keep your Asset Links working*. The other option would be to just convert the Project file, but then you will have to manually re-Link every Asset. If one gets lucky, and the Assets are stored in one folder, PP *might* be able to have you locate the first missing Asset, and then automatically locate the rest. I hesitate on this last comment, because you will have converted the Project, so things do not always work 100% the way they would otherwise. I had to do a lot of re-Linking, but I was jumping several versions and from Mac to PC. Still, once the Assets were re-Linked, all has worked perfectly.
Good luck finding a PC operator with CS3. Should not be that hard. Wish I could help you more, but CS2 won't cut it, for what you need to do.
Hunt
* Keeping the drive letter the same will be a big step to keeping your links. Let's say that you are working on your D:\ drive (sure that Mac would call it something else), and you copy over to an external. I'd have the PC operator copy the Assets (with folder structure) to their D:\, just to keep the Links. Does this make sense?
PS one little consideration is Mac's not using NTSF HDDs and the file size limitation of Fat-32 HDDs. However, you already have your Project and its Assets on a Mac, so this is probably moot.

How to update project files in Archive ?

Hi there,
When we start up our 10.0.6, it will ask us whether we want to update the project files.
For effieciency purposes, I moved a lot of my project files to an acrhived folder so that FCPX doesn't search for it when loading.
Thus, I believe, the projects files in the archive folder will not be updated. So, how will these be updated ?
Thanks

andynick wrote:
I move all my updated Events and Projects to a new (temporary) folder, then move the archived Events and Projects (a few at a time) to their relevant folders where FCP X will detect them on launch, and update them.
Andy
OIC, so when the FCPX is launched, it will come out with a message asking you to update whenever you move an old Project files and/or Event files to the "correct" folder ?
Thanks

Can't open FPC 5.1 project file over 20 MB

Hello,
I just upgraded from a dual 2.7 G5 with FCP 5.1 (Studio 1), to a 2x2 GHz dual-core Intel Mac Pro with 5 GB RAM. I upgraded to the FCP Studio 2, with FCP 6, at the same time.
This is the problem I'm having: I cannot open any FCP project file over about 20 MBs. I can open any up to and including one 19.3 MB file. I've tried ones that were 250k, 1.5, 4, 7, 11MB, etc. However, I cannot open a 22.4 MB project file, or any larger ones (going up to about 55 MB). These are old project files that I can open just fine on my old mac.
Is this a known issue? I was unable to find any similar posts on the forums. Any help on this would be great.
Thanks
Message was edited by: dmoore001

Michael
here is a link to a snippet of the program to give you an idea of the depth, the treatment is similar throughout the 9min20sec.
digital-image.com.au/videos/Spectacular_V19.mov
Workflow...
Project contains variety of elements
DV captured from tape
DV from MPG1s converted in MPEG streamclip
still images
masks using "Travel Matte Luma"
sequences & vision created in motion, both projects and exported vision on timelines.
text created in Live type, so animation footage included.
Lower third banners, jpegs
audio as AIFs
all the usual bit and pieces.
Contains about 19 version of this sequence, plus 4 other sequences which are basic transitions with 1/2 doz versions of each.
So each time I look at making amendments or significant changes to a sequence I will create a duplicate and increase a version number. The project is backed up regularly, unfortunately in the migration from the G5 to the MacPro all of the auto saves were ditched... However if I do any major revisit I create a duplicate of the project, so in the move from the G5 to MacPro I went from V4 to V5, knowing that it would want to update the project file from FCP5x to FCP6x.
Tony

Finalcut pro project file

Here's a question:
I am currently working on a project in FCP 7. All my project files are stored on external drives. After finishing yesterday. I closed the project file and saved it as usual. Today i tried to open the project file that I had been working in the day before, alas it won't open, it won't open in autosave as well, hmmmm. All the older project files open up even from the same drive, If I open an old project file and save as new it opens up. The current one is the only that won't open just the beach ball and bang it quits, could this one project file be corrupted?
Thanks,
Stuart

[FCP Maintenance Pack|http://www.digitalrebellion.com/fcs_maintenance.htm] has a Project Repair utility and comes in a fully functional 15 day trial version.
If it does what you want, the full version is worth every penny.

How do I read a Premiere 6 project file?

I had Premiere 6 on an old Mac a few years ago, and created a project using footage of an event from two MiniDV cameras, one stationary and one mobile. Edited them together into a seamless video using the stationary footage as my base and cutting to the mobile (video only) when it had a better shot. But I never printed this project to video.
That old Mac is now gone, and my new one won't run Premiere 6. I have a copy of Final Cut Express and would like to recreate my project in it (still have all the source clips). I figure that I should be able to take the in and out points listed in the Premiere project file and use them to quickly set up the same timeline in an FCE project that I had in my Premiere project, but I haven't been able to figure out that information when reading my project file in a text editor.
Does anyone have a resource for interpreting the contents of a Premiere project file?
Thanks,
Paul

Paul,
The Project file (PROJ, IIRC, though probably without that actual file extension on the Mac) is XML with links to the media, and then instructions for Premiere. Actually "reading" and making much sense out of it, will be difficult, but you should be able to Open it in most document viewers. On a PC, one can use NotePad, but as the fiile will not have a recognized file format, one must use the All Files dropdown. Not sure about Mac document readers, but it should be the same, or very similar.
Now, and likely not of much use to you, those old Project files can be Opened in later versions, but with limitations. As Pr 6.5 was the last version that was X-platform, until CS3, there is a big gap (Pr 7.0/PrPro 1.0 and PrPro 2.0), and IIRC, Mac CS3 of PrPro could not Open the old versions. The workaround was to befriend a PrPro PC CS3 user, who could Open the old version, and then just Save to a CS3 PRPROJ file, that later Mav versions could handle. Several later Mac users, had to use that workaround, and at the same time, also made friends with some PC users. Not sure if there are any newer workarounds.
Also, I cannot recall when Adobe added more support for going from/to FCP and PrPro, but I doubt that even if you had Mac Pr 6.0, it would offer many useful options. Others will have to fill in the blanks there.
Wish that I had more to offer, but my exploration of older Pr Mac Project files was limited to Opening them in PrPro 2.0 on my PC. Most Opened just fine, with but a few minor exceptions (some Transitions failed to translate, as did a few 3rd party Effects. PrPro was kind enough to point those out, and even give me the TimeCode, plus the name of the missing Transitions, and Effects. That does not help you though.
Good luck, and maybe you will be better at reading those XML instructions, than I have been. Other than finding missing/broken links to Assets, it all looks like Greek to me.
Hunt

Import-Export of track add some old projects and files.

We want to copy one NWDI track to new one.
When we Forward one track to to created new one, and open projects in Development Studio,
many old projects and files appeared, thatis not visible if to open old track in Studio.
So question is - how to export one track so it would appear in studio same way, but not "open all old existed" way?
As well very interested reason why so happens ?
thanks

Hi Vladimir,
I am not sure I fully understand your question, but if you'd like to copy a track to an other one, then I can suggest you to go for replication. This way you can keep the whole version history as well.
Replicating a Track into a Different DTR Repository (despite the title of this article I was confirmed by the development support that you can also use this procedure to replicate into the same DTR, not only into a different one)
http://help.sap.com/saphelp_nw70/helpdata/en/46/5d032c1e661cbee10000000a11466f/frameset.htm
If this is not what you need, then please rephrase the question for better understanding.
Thank you!
Best Regards,
Ervin

Difficulty opening old projects. Disk too slow, bad files, etc...

Recently I've been trying to update old song files. I have a bunch of projects from Logic 6 that have trouble in Logic 7. I get tons of "Disk too slow or System Overload" errors and Logic Crashes quite a bit as a result. The songs aren't overly processor intense, so I think something else must be the problem. When trying to move song files into a new project folder, I get "bad file" errors. The audio files will play, but it seems the computer may be having trouble playing them. Anyone have any experience with this?
g

Mr Dummy.........
recently been using os9 - lp6.3.1. a lot.
much, much more responsive. NONE of the glitches found in Lpro7.
immediate everything.
==============================
my guess is logic's guts are still in some sort of app wrapper.
apple have not altered the code, except where needed for the new bells and whistles. (sort of like some form of advanced simulation).
logic's performance will vary wildly from mac to mac, depending on the osx version and it's hardware.

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

Using old iMovie projects files

i created an iMovie about 3 years ago on a mac and I want to use those project files again on my iMovie version 7. Any ideas anyone?

It depends on the iMovie version number that created the files. iMovie 5, and earlier, uses a different folder structure than iMovie 6.
iMovie 6 stores all of the Project data inside a special "package" file (double click launches the app). You can Control-click on the Project file and "Show Package Contents". You can then dig around to find your source file imports and move them to a new location by holding down the Option key while your drag. The cursor will change to a green circle with a plus + sign indicating the file is being duplicated (not removed from the Project).
Older versions of iMovie have a more "standard" folder structure but the Option key is still the trick you need to remember when moving files.

Trouble finding old templates/project files

I created several relatively intricate DVD menus several months ago and then had to transfer all the project files and associated media to a different computer. Now I can't seem to open any of the menus I created.
It seems like it should be simple but what is the extension of the primary project file in DVD SP? Are they *.layout files? When I try to open these, DVD Studio pro just sits idly and does nothing.
Any help would be hugely appreciated.
thanks

I was able to work this one out myself.

Old Project Files

Similar Messages

Maybe you are looking for