Old Project Opens in New FCP with only Browser and Viewer

I can't open a project created in previous FCP and get the timeline or canvas, even when I click on Window-Arrange-Standard. I just want to send that old movie as a quicktime movie, self-contained to the external hard drive where I have the remake of that movie, but can't get to its timeline to select and do so. I'm also afraid I can't find this forum again for any answer you post, so can you please also send email? I promise not to use it for anything but this question. [email protected] I don't know what OSX version number I have, but it's called Tiger
Thanks,
Deb

I can't open a project created in previous FCP and get the timeline or canvas, even when I click on Window-Arrange-Standard. I just want to send that old movie as a quicktime movie, self-contained to the external hard drive where I have the remake of that movie, but can't get to its timeline to select and do so.
If I'm reading this correctly, it sounds like you can actually open the project file, but cannot see your sequence.
Have you looked for the sequence in your Browser window and tried double-clicking it? The only way to have your Canvas and Timeline windows visible is to have a sequence opened.

Similar Messages

Reader opens a new window with same file and crashes when trying to print

the wierd thing is that I have two Dell systems printing to the same HP 4015 printer, though when the other one prints there is no problem, and when printing to another printer the same error occurs, any other documents are fine. we've tried the drivers but since the error happens with other printers I don't think its a issue with the drivers or the printers. I did a quick search and found similar issue, though none with any results, if I've posted in the wrong area please point me in the right direction. any assistance would be greatly appricated.
thanks.

if it will be of assistance to any one, the resolution to the issue came when the profile was deleted and then recreated. we came to this conculsion when we created a new user proifile and tried to re create the issue. while not technically a direct fix the issue was resolved. its a hell of a lot better than some of the other resolutions online.

I just opened an "old" project in a newer version of iPhoto and the pages in the book doubled in number with the seam in the middle of each page. Suggestions?

I just opened an "old" project in a newer version of iPhoto and the pages in the book doubled in number with the seam in the middle of each page. Suggestions?

Start with Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
If that doesn't help continue with:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database.
Happy New Year

Set up new iPhone 5 with iCloud restore, then iTunes created new library with only content already on phone. How do I find and sync everything in original library?

My daughter got a new iPhone 5 and we set it up using the option to restore her iPhone 4 backup from iCloud. This worked great and everything on the old phone showed up on the new phone. Because we were traveling, we weren't able to sync the iPhone 5 with iTunes at that time.
She purchased new apps and music on the iPhone 5. When we returned home she synced with iTunes, and it seems to have created a new library, with only the content currently on the phone. I don't know if it prompted her to do this on the first sync or not - she doesn't remember.
So in iTunes, the library now only shows the music on the phone. A sync isn't doing much now because when choosing the phone in iTunes and selecting each content type across the top (Apps, Music, Movies, TV Shows) the box is unchecked to sync that content. When I check the box to "Sync Music", iTunes gives a warning:
Are you sure you want to sync music? all existing songs and playlists on the iPhone Becca's iPhone will be replaced with songs and playlists from your iTunes library.
Same goes for apps, except that warning also mentions that the apps and their data will be erased and replaced.
At some point she was also getting a message that this iPhone was associated with another library, but I'm not sure how she had triggered that. She says she canceled out of that. I can see all of the music
How do we get iTunes to see the "old" library of songs, videos and apps without losing the ones she's purchased already on the iPhone? The music files themselves are still on the computer, and include music both purchased from iTunes as well as music ripped from CDs. Thanks for any advice!

See Recover your iTunes library from your iPod or iOS device.
tt2

Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

This document can't be opened because it's too old.To open it, save it with Pages '09 first.

Bought new MAC desktop tried to open old Ipages and I get this message, what do I do now?
This document can’t be opened because it’s too old.To open it, save it with Pages ’09 first.
Thanks

If you migrated your old system to the new Mac you should still have Pages '08 in your Applications/iWork folder.
Open your document in Pages '08 and Export it to Word .doc/.docx and open that in Pages 5.
Peter

Firefox could not open 300 new tab with content loading

Dear All,
Thanks for good support in web browser world.Directly i come to the question.I have excel sheet where it has 300 hyperlinks as given below(example links 3)My Excel macro is written in such a way that this will open all the link in firefox "new tab " one by one.It was perfect and page was loading in previous versions(i could not remember the exact version but i could say an year before when i used firefox it worked well).Now i am having issues opening 300 new tabs with links.It gets started loading the page but before one page loading gets completed too many new links are opening but the page is not fully loaded at all.When i click the tab for each link and see in the browser the green clour processing round sysmbol keeps on rotating.Can you please look into this issue.
If you want i can be contacted through email or if the information is not clear i am ready to connect through web sharing or to have a call.If you want spreadsheet for testing this issue i will send it.
Link Used in Excel sheet example : 300 links in same site with differrent page:
http://chartink.com/stocks/RECLTD.html
http://chartink.com/stocks/bpcl.html
http://chartink.com/stocks/itc.html
Expecting your positive reply at the earliest.Thank you!
Regards,
Marx
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

Hi Marx,
With this kind of data testing it is helpful to provide context to the issue you are trying to document. This technical information is very useful to the engineers working on the performance of Firefox and I am sure this is the kind of information they would love to see.
Therefore I would like to put you in touch with this team to see what they can do with this information. Talk to the #perf channel in irc and they should be able to put you in the right direction. I am asking currently and see what I can find. Or in the meantime check out the current tab bugs in the Performance component of bugzilla provided in the search below: [https://bugzilla.mozilla.org/buglist.cgi?quicksearch=tab%20performance&list_id=9361049]

Ive got a new pc with windows 7 and my ipod touch 4th gen is synced with my old pc ,how can i back up the photos on the ipod to my new pc ?

ive got a new pc with windows 7 and my ipod touch 4th gen is synced with my old pc ,how can i back up the photos and music on the ipod to my new pc ?

Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content such as music, videos, and photos synced to the device, see this older post from another forum member Zevoneer covering different software available to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock

Transferring old iPhoto library to new iMac with iPhoto 11

I have an external hard drive which contains my old iPhoto library (let's call it iPhoto A library) with about 10 years of pictures. This was saved from an older version of iPhoto. Since then, I started a new iPhoto library (let's call it iPhoto B library on my old computer but with iPhoto now upgraded to iPhoto 11).
My question is: now I have a brand new iMac with iPhoto 11 (and absolutely no pictures currently in it!). How do I successfully transfer both of my iPhoto libraries over to my new iMac? I would prefer that they be in one library, but I'm not strongly opposed if they need to be in separate library. My second question: if they are in separate libraries, when do I save them? Same folder? Where?
By the way, when I try to open my iPhoto A library, it says "The photo library needs to be upgraded to work on this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete."
Thanks so much to the Community for helping me!

How do I successfully transfer both of my iPhoto libraries over to my new iMac?
drag them over (of course they can not have the same name) - Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
I would prefer that they be in one library, but I'm not strongly opposed if they need to be in separate library.
There is no way to do this with iPhoto - if you have iPhoto '11 version 9.3 or newer you can purchase Aperture and use it to merge libraries. Or you can purchase iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - and use it to merge iPhoto libraries.
My second question: if they are in separate libraries, when do I save them?
Where ever you want - if you have seperate libraries you switch between them by depressing the option key and launching iPhoto and using the switch library window
By the way, when I try to open my iPhoto A library, it says "The photo library needs to be upgraded to work on this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete."
That is correct - old versions of iPhoto can not access newer versions libraries
and what ever you choose to do be sure tha tyou backup procedures are backing up everything
LN

Bitlbee/Weechat: Opening a new buffer with a specific nick[SOLVED]

I have been using this neat chat application for a while now but I can't seem to find enough information about how to open a new buffer with a specific nick only using a command instead of enabling the mouse to click on said nick to open the new buffer with that nick. I really have looked in as many places as possible and I haven't found any information on which command to use for this specific action. Any information would be appreciated thanks. If there is a script for this particular action please point me to it.
Last edited by rg_arc (2012-06-21 18:25:39)

Isn't /query nick doing what you want?

Firefox won't open .ppt downloads. Instead it merely opens a new tab with nothing in it. How do I fix this?

I used to be able to open .ppt files on webpages with Firefox. But now they don't open. Instead, Firefox opens a new tab with nothing in it. I have already checked the settings for which programs are to be associated with which files, but it is still not working.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Can i change my old ipod to the new one with priceless

I have an ipod, they said ipod touch 3 8gb, they said... Now i can't do anything with this because too many apps require IOS >4.2.1
So i have a question: Can i change my old ipod to the new one with priceless.
Thanks for reading
p/s: im living in San Francisco now

CookPu wrote:
If you know, please answer my question
TFR
Wow! Give us a chance!
I live in the UK (about five minutes drive from the Olympic cycle race route. Didn't you notice me waving to the cameras? ). Not far from you , but far enough away that I might be doing something else, even if the cycle race has finished. The same applies to everyone else too. I'm eight hours ahead of you, so if it's 9pm now, where you are, it's five in the morning where I am and most of us here will still be inspecting the inside of our eyelids!
Now, about your problem.
If your iPod is 8GB, then it is not a 3rd generation Touch - no matter who they are and no matter who said it was! If it has model number A1288 etched into the casing on the back, then that identifies the 2nd gen Touch. (Yes, there is a 4th gen Touch in 8Gb capacity, but still no 8GB 3rd gen - ever). The third generation is model No. A1318.
Can i change my old ipod to the new one with priceless. I don't understand what that means, unless you mean "with the price difference". In which case, the answer is "no".
Even more confusing is; Now i can't do anything with this because too many apps require IOS >4.2.1 because -
a 2nd generation Touch (including the 8GB) can install iOS 4.2.1 But that's as high as it can go. So that's incorrect!
you can still use any App that doesn't require a higher iOS than you have. So still incorrect!
you can still use it as a music player, so guess what, wrong again!
... to store your photos - you know what I'm going to say now, don't you?
... and play those videos!
So wrong, wrong and wrong!
Message was edited by: the fiend

How can i create a new user with only read rights ?

How can i create a new user with only read rights ?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

TS1363 I have a new computor with windows 8 and have installed I Tunes but it will not reconise my old I Pods, as I don't want to lose these tunes what can I do?

I have a new computor with Windows 8 and an old nano I Pod, I Tune does not reconise this, what can I do without losing all my music?

How to use your iPod to move your music to a new computer
iPod appears in Windows but not in iTunes

Firefox always opens a new window with ad.yieldmanager

As soon as i click on an image or other views on a website firefox opens a new tab with adyieldmanager and i cant get rid of it.

hello, this sounds like a problem possibly caused by adware/malware on your pc. please go to ''firefox > addons > extensions'' & remove any suspicious entries (toolbars, things that you have not installed intentionally, don't know what purpose they serve, etc). also go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[Troubleshoot Firefox issues caused by malware]]

Old Project Opens in New FCP with only Browser and Viewer

Similar Messages

Maybe you are looking for