"Old" projects

Hello!
I 'd like to use an "old" project made with FLah Catalyst 5.0 in FlashBuilder 5.5.
Now it says the project cannot be compiled because "The target Flash Player version 10.0.45.0 specified should be equal or higher than the minimum version 10.2.0.0 required by Flex SDK."
So how do i change the target FLash Player version within the code?Installing the newest release of FLash Player is obviously not enough.
Thank you.

I've not tried FCP 1 files, but have opened FCP 3 files on FCS 2 without any problems...
Jerry

Similar Messages

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Old Logic + a new Mac = can't open old projects anymore. De/re-install?

Hi everybody,
maybe someone can advise me with this problem:
I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
Regarding all 3 issues:
I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
Or completely re-install the whole Mac? (pleeease no....)...
If anybody has any idea, it'd be highly appreciated.
Thank you in advance and for the energy to read my little novel here,
cheers,
Joern

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Editing Old Project from External Hard Drive

Last year my G5 developed an incurable Kernel error issue. I decided to buy a new iMac and have been very pleased. I backed up my system to an external hard drive and now I would like to access an old project from the external drive.
I selected the external drive and went to the last date of my backup. However, this is where I have no idea how to complete this task. Can I simply open FCE and import the project from the drive? Will all of the media transfer over?
Would really like to know the ins and outs before I begin and paint myself into a corner. Any help would be appreciated.
Thanks!

Tom:
Not sure what you mean by "restore". I am assuming I will need to do the following:
1. Open FCE
2. Import the old project from my external drive
3. This is where I get lost. Can you please fill in the blanks from her for me. I cannot seem to find the instructions to do this anywhere.
Thanks!

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

What's a good codec to install for old projects?

I have some projects cut on CS4. Tried opening with Premiere CS and I'm getting error in regards to the codec. I'm assuming this is in regards the .avi files. The files where originally captured with the Canon mkII. I used Neo Scene to covert them to .avi files. It's just this old projects from a couple years ago that have trouble. I cut a video this past year with new footage with no problems. At one time in the past, I installed Main Concepts codec to solve the problem.

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?

Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?
I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system. http://www.youtube.com/watch?v=2cL9RuDV3Qc
Thoughts? Anyone?

GUYS, I NEED HELP !
ANYONE?

Problems with iMovie 6.0.3 corrupting old projects?

Hi everyone
This is my first post, and I have a very big problem which I hope you can help me with.
In a nutshell, ever since installing iMovie 6.0.3 I have had some very strange problems with opening certain old projects. On opening a project I get the standard "this is an old project, do you want to convert" message, and then a number of things happen. Either iMovie opens with absolutely nothing in the Clips pane or the timeline (and this is in a project with several gigabytes of clips); or, a couple of random clips appear in the trash, but nothing else; and/or, I get a blank project which seems to be in NTSC format, whereas all my projects are in PAL.
All the original clips are there in the Media folder, but are not recognised if I try to import them (Error during import; Quicktime couldn't parse it: -199).
I have tried re-installing both iMovie 4 and 5, but no joy. So, I can't open the 'bad' projects in either the old iMovie formats or the new one. The wierd thing is that some (newer) projects do work.
Following some old threads here I have tried using Lennart's File Fixer - didn't help. Also tried moving the .mov file and opening project. Again, didn't help.
Sooo...any ideas? I am really desperate! The old files are there, it's just that nothing seems to be able to read them.
Thanks for your help.
Andy
eMac 1Ghz 1Gb RAM Mac OS X (10.4.8)

still having the aboved mentioned problems, freezing of video during transitions, any help?

Import-Export of track add some old projects and files.

We want to copy one NWDI track to new one.
When we Forward one track to to created new one, and open projects in Development Studio,
many old projects and files appeared, thatis not visible if to open old track in Studio.
So question is - how to export one track so it would appear in studio same way, but not "open all old existed" way?
As well very interested reason why so happens ?
thanks

Hi Vladimir,
I am not sure I fully understand your question, but if you'd like to copy a track to an other one, then I can suggest you to go for replication. This way you can keep the whole version history as well.
Replicating a Track into a Different DTR Repository (despite the title of this article I was confirmed by the development support that you can also use this procedure to replicate into the same DTR, not only into a different one)
http://help.sap.com/saphelp_nw70/helpdata/en/46/5d032c1e661cbee10000000a11466f/frameset.htm
If this is not what you need, then please rephrase the question for better understanding.
Thank you!
Best Regards,
Ervin

In Premiere CS5, I opened an old project I had edited using Premiere CS3 and now its all pixelated!

Hi everyone. I just got Premiere Pro CS5 and started the program and opened up an old project I had edited using Premiere Pro CS3. Premiere Pro CS5 said it had to convert the project for editing in CS5. I clicked "okay" and the project opened up in CS5. Now, when I play the project on the timeline, everything has some pixelation! The footage was nice and sharp without any artifacts when I edited in Premiere Pro CS3. How do I get rid of this pixelation in CS5 so the footage looks like it is supposed to?! Thanks.

Well, there's really no rationale for the project conversion to somehow drastically alter the appearance of footage, particularly something like DVCPROHD. Adobe changed the way its software handles pixel aspect ratios between CS3 and CS4, but that affects SD footage, not HD footage. There may be some degree of weirdness since in CS3, you had a project that was set to a specific format/frame rate/codec/whatever, whereas in CS4 and later the project is just a container for sequences of any and all types.
Instead of opening the original project and going through the conversion, try creating a new project and importing the old project as if it were any other media file. Premiere will reconstruct the old project within the new one; this probably is not going to have any change, but it's worth a shot.
Can you describe (or better, show) the pixelation you're referring to? It's hard to visualize without, well, a visual, and that might help better pinpoint the issue. Also, is the pixelation only during playback, or is while the clip is paused in the sequence, as well?

Iweb - harddrive crashed - need to access old project

My hard drive crashed and I can't get to my old project from the newly loaded software - help.

Hey Cedric,
Thanks for the info. I'm not sure if I followed it to the "T" but I was able to locate my previous domain in one of the many chunks I saved as my hard drive was dying. I ended up dragging it into the new iWeb location and it's all there.

Old Project Files

I currently have final cut pro HD, but found some old project files that I would like to re-edit that I created using Final Cut Pro 3. Unfortunately the project files just show up as a "Unix Executable" file and if I try to open them in FCP it says "Wrong Type". What can I do to update these project files so I can open them again?
Thanks
Dual 2Ghz G5 Mac OS X (10.4.7)

astella,
(1) This portion is not elgible for points: "When you are ready to quit this thread it would be an act of politeness and an aid to the health of this forum if you would award points to those who have been most helpful to you, giving the "solved starfish" to the one most helpful and the "helpful" points to the two next-most-helpful. Also, on your way out the door you should mark the thread as "answered."
If you do not know how to do these things, post again and someone will help."
(2) This portion is elgible, should you care to do so: "Software Architects, Inc., http://wwwsoftarch.com, has a product, GreatVideo! for Mac OS X, which is supposed to make almost any DVD readable by a Mac. I have used it to bring in DVD-R/W created by Panasonic/PC."
LM

Why did ps touch does not show saved project and my old project disappear?

Why did ps touch (ipad 4) does not show saved project and my old project disappear?

OldGhias,
Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
I don’t quite understand all of your statement.
To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
Or
You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
Lastly, did you reformat the SimpleSave drive to Fat32 first?
My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work.

How to import the old project to new project in P6

Hi new guy here.Sorry if this thing have been posted before.I am kinda new here.
I just wonder if can I import an old project to new project in P6?
I have already finished with the project,but then as something happened I need to make it as a new project.So how can I used all the information I have on the old project to be transfer to the new one?
If can how?I need to change certain things like date,resource,etc.
Thanks

hello.
there are other more elaborate (and depending on size and scope of modifications, possibly useful) options including Methodology Management, but to keep it simple, try the following:
if you have an initial baseline of the existing project, restore it and go from there. let me know if you need help on that.
if not, copy-paste the existing project and manually adjust the newly created one. you can use "global changes" and/or "fill down" (see help and/or available related posts for this) to clear progress data such as actual resource/ expense units and costs, then activity start dates (in this order).
make sure you baseline your projects before you start imputting actual data.
good luck.

Premiere Pro CC 2014 crashes on opening old projects

I have the update. I can run PP 2014 with no problems if I start from a fresh project. However, if I import a project from the previous version of PP, the software keeps crashing. In other other words PP 7.2.2. in this example, is not upward compatible with PP 2014. I suspect your software engineers didn't consider the fact that users may need to go back to projects done in earlier versions of PP so I'm hoping they will add this feature in the next version.
Dave

Open an old project in the newer version and you are offered the opportunity to save it as a compatible project with a new name.
Doing this retains the original project.as well.

Opening and maintaining old projects (from RH 2002) in RH 7

Does anyone have tips on converting old projects from a very
old version of RH (2002) to RH 7? We have two very large webhelp
projects with context-sensitive topics, plus many other without. We
realize that backing up is essential, but are there any other
details that we should know about or information that you can point
us to?
Thanks in advance!

I'll point you to
Peter's
site, yet again.
Honestly, just about everything you want to know is on his
site (and what isn't, is on Rick Stone's). You might also look at
his
merged
WebHelp recommendations, as a way to possibly split those very
large projects into more manageable chunks (they're bound to keep
growing, right?).
Good luck,
Leon

"Old" projects

Similar Messages

Maybe you are looking for