Old QT7 allowed conversion (export) from mp3 to mp4

I have 10.8.2 and I saved a copy of QT7 (7.6.6) so I could do conversions such as mp3 tp mp4.
A friend has a system configured like mine. He does NOT have a copy of OT7. He has QT 10.2. We tried to download from Apple the correct app. It won't let us instill a copy on his macine. HELP! Thanks, -bill

A friend has a system configured like mine. He does NOT have a copy of OT7. He has QT 10.2. We tried to download from Apple the correct app. It won't let us instill a copy on his macine.
What version of QT 7 did he download? Only the special v7.6.6 specificially modified for installation and use on latest Mac OS X v10.6, v10.7, and v10.8 systems can be installed. See instruction and link found HERE.

Similar Messages

Final Cut Pro Audio Levels Low when exporting to mp3 and mp4

Hi everyone! When I export audio from Final Cut as an mp3, my levels are very low. When I export footage as an mp4, the audio is low as well. But before exporting, my levels are right at or below 0. So they are where they should be. So for example, when I open the audio in Adobe Audion or Logic, they could almost be doubled before peaking within those programs. Could this be a compression issue? And input would be helpful. Thanks!

Are you working 0n 10.0.9? If not, update FCPX and see whether that solves the problem.
Russ

Old DV .avi projects exported from Premiere 6.5, hang in CS4.

Hi
Im new to CS3. I finished some Mini-DV PAL 4:3 projects ages ago using Premiere 6.5, exporting the finished timeline directly from 6.5 as .avi files. I would have used whatever the default export CODEC in 6.5 was.
My Premiere 6.5, the machine used, and the project files have long gone.
When I play these .avis in Window media player, Nero, Media centre, etc they are fine.
But when imported into a CS4 project they behave strangely. The timeline progresses normally, the timecod advances, the audio plays, but the video hangs and stutters, sometimes as a frame hold, sometimes skipping, sometimes producing green video noise. This appears to occur mainly where there are titles and opacity changes.
All I want to do is add a few beginning and end transitions and some chapter points, send to Encore, then burn to DVD.
Im sure I have set the correct project parameters: DV PAL, SD, 720x576i.
Raw capture files of the same vintage play fine.
My machine is fast enough: 2.4GHz Quad core, Win XP SP3, 3.25GB RAM (out of 4GB). It runs AVCHD from my current camera faultlessly.
If anyone knows what is going on here it would be greatly appreciated!!
Below are the properties of one of the files, directly from CS4:
File Path: G:\Video\Sweden.avi
Type: AVI Movie
File Size: 3.7 GB
Image Size: 720 x 576
Pixel Depth: 32
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:17:37:08
Average Data Rate: 3.6 MB / second
Pixel Aspect Ratio: 1.094
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 12.00
Video track 1:
Size is 3.54G bytes (average frame = 148.12K bytes)
There are 26433 keyframes.
Frame rate is 25.00 fps
Frame size is 720 x 576
Depth is 24 bits.
Audio track 1:
Size is 193.60M bytes
Rate is 48000 samples/sec
Sample size is 16 bits

It is quite common to find that Windows CODECs used by the clip window will play OK, but then the same clip will not play off the timeline. This is because on the timeline the output goes through Premiere's rendering engine rather than Windows and this is less forgiving due to editing requirements.
I am able to import old DV500 output files into PPro CS4 without any problems.
I would still suspect something to do with installed CODECs versus your 32-bit DV file. DV is normally 24-bit and doesn't include an alpha channel (the final 8 bits of 32).
You might be able to eliminate the extra 8 bits using AVIsynth (free download) if you can't fix it another way.

Free conversion software from avi to mp4

Hi has any body know of a good "free" avi to mp4 convertor that works?

Hey there,
I would use Handbrake or Videora (both of which are free). I have had great luck with each.
http://handbrake.fr/
http://www.videora.com/en-us/Converter/iPod/
B-rock

How do I transfer Adobe PDF Export from my old laptop to my new one?

How do I transfer Adobe PDF Export from my old laptop to my new one?

Install it like you originally did.

In IOS7; I am trying to delete a picture from an old text message conversation, and it keeps coming back in a second. Why?

In IOS7; I am trying to delete a picture from an old text message conversation, and it keeps coming back in a second. Why?

Turn off, and on your device again; and how are you deleting the picture?b From where :O

My hard disk died and the backup is very old. Can I export my iTunes library from my iPod classic back to my new laptop?

My laptop died and the only backup is quite old. Can I export my tunes and playlists from my iPod classic back to a new disk?

See Recover your iTunes library from your iPod or iOS device.
tt2

How do I produce the highest quality DVD from MOV exported from iMovie

What is the best method in iDVD11 for burning to DVD, an imported HD 720p or HD 1080p MOV file exported from iMovie11?
I have successfully exported a 5.5GB (66min) HD 720p MOV file from iMovie. I then used iDVD to import this MOV file and burn it to DVD. When I played the DVD the quality was nowhere near that of the imported HD 720p MOV file as played on QuickTime. The DVD also shows captions at the edge of the 16:9 TV screen instead of further inside as per the QuickTime screening of the HD 720p MOV file.
How can I improve quality and maintain borders in iDVD for the DVD output?

Hi
How can I improve quality and maintain borders in iDVD for the DVD output?
Quality.
• Use iMovie up to HD6 or FinalCut - as iMovie'08 or 09 or 11 - just delivers every second line to iDVD = less resolution
• There are no HD-DVD in real life - DVD is as standard SD-Video
• If You must use iMovie'11 then do not use "Share to iDVD" BUT "Share to Media Browser" and as Large (Not HD or other resolution - as result will suffers)
Border
• May be turning on TV-Safe area in iDVD can help a bit. ?
• If this is IMPORTANT - Then You have to re-do Your movie in FinalCut and here turn on TV-Safe area and shrink the movie area to within this. Now it will show all on an old CRT-TV - but with a black frame due to that no two CRT-TVs show exactly the same area and then TV-Safe must be less than this.
My - Un-specific notes on DVD-Quality. If You are interested.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no QT-conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are playbacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Error while Export from 10g and import to 11g

Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu

Jibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).

FLV Export From Final Cut Pro

Hi Folks,
I've been reading and reading and just want to know what is
the right way to go about exporting video from a third party
application like Final Cut Pro. Yes, the easy way is to
Export>quicktime conversion and go from there. If this is the
best way then great, But i'm wondering if exporting as a lossless
quicktime codec such as the Video codec or the Anitmation codec
would be a better choice then go to the flash video encoder with
the lossless file. I heard that exporting straight out of FCP could
be bad as the video needs to be deinterlaced before the flv stage.
If this is the case, what are the best settings when
exporting a lossless quicktime file? There are about 6 setting s
that need to be set and I haven't a clue what would be the right
settings.
If exporting from final cut straight to flv, are you folks
dropping the frame rate to 15 fps(cutting your frames in half). Is
this working better for you?
Well thanks for all your help, I keep on testing short clips
and can't seem to find a any certain configuration that i really
like.
hanks so much for all your help.
todd

Todd ..
We do quite a bit of video / flv work.
Our editing software is VEGAS so unfortunately we can't
render directly to flv .. but avi->flv via Sorenson Squeeze.
If Final Cut allows rendering directly to flv, my
recommedation would be to use that functionallity. Caveats .. if
the encoder can 1. deinterlace i.e. progressive scan. 2. reduce
your framerate from 29. to 15. 3. gives you the ability to control
# of key frames.
The logic being .. use the fewest number of encoding methods
to get from source to output to maintain best quality.

Unable to export from iPhoto

I have tried to export individual photos and an album as a file(s) to my desktop and to smugmug via the iPhoto plugin without success. I have also put a new folder in Pictures and have tried to export the photos to it without success.
When exporting to desktop, the message comes up "Exporting...Unable to create /users/name/desktop."
When using the smugmug plugin, iPhoto "unexpectedly" shuts down!
I have tried to drag and drop photos from iPhoto without success of course.
I will appreciate your help and suggestions. This is the first time that I've had problems exporting from iPhoto.
Vernon

Well the reason you can’t export is because iPhoto can’t find the pictures.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Export from QT Pro as AVI reduces quality of video drastically

I need AVI for poor PC users in family.
Original video is AVI from a Samsung digital still camera, saved and edited in QTPro 7.2 on iMac.
Export as AVI using Default or Highest Quality Settings, results in a severe degradation of colour tonal gradation - which was OK in the original AVis (viewable in Quicktime), and in QT.
It looks like the number of colours has been reduced from thousands to hundreds ( ? 256)
Filesize is similar- MOV 41.6 MB, AVI 39.5 MB.

The only detail given in the Samsung Pro 815 manual is "file type .avi (MJPEG)". I used default Cinepak compression to export as .avi
Now we're getting somewhere. Motion JPEG is a common video codec used by certain digital camera manufacturers in the AVI container. It is a moderate compression/higher quality codec. Cinepak is an older, high efficiency video codec probably better suited to smaller resolution use. Comparing CinePak to MJPEG would, in some ways, be like comparing MPEG-4 to H.264. In both cases the video data rate of your final "Cinepak" AVI needs to be on the order of 2.0-2.5 times the data rate of your original "MJPEG" AVI file for equivalent quality. While I do not normally deal with such files, a previous poster ask for help in converting his Casio (MJPEG/DVI ADPCM) files for use in iMovi '08. Wile the original file is not of the highest quality, I prepared a clip to compare the original "MJPEG" AVI video track with the final "Cinepak" AVI track. (For comparison purposes, these two tracks were stored in an MOV file container so they could be compared on a "frame-to-frame" basis.) If interested, here is the URL for this comparison.
http://homepage.mac.com/jrwalker4/.Public/CIMG8145Comp.mov
For QT7 Pro to edit the original .avi clips, they have to be saved as .mov.
Strange. I can convert directly from the "MJPEG" AVI to "Cinepak" AVI file.
This is instantaneous, and causes no quality loss. No file conversion or re/de/compression seems to occur.
Correct.
Exporting Cinepak .avi obviously requires considerable processing, so it seems that the codec used in the Samsung .avi is native to QT
This codec basically sequences a series of still JPEG photos in either the AVI or MOV file container. As such it is compatible with probably any system capable of viewing JPEG photos and opening either file container. This compatibility is probably the reason this codec was selected in the first place by the camera manufacturer.
The issue is clearly that the QT7 >Cinepak .avi export process (?deliberately) degrades video quality, without reducing file size, even though it claims to be using "Best" quality and "millions" of colours.
Each codec has its own characteristics. If a small file is what you want, then reduce the resolution of your movie or accept the reduction in quality at its current resolution. If quality is your main concern, then increase your video data rate so it can store as much of the original quality as it can at the current resolution or simply switch to a more modern codec, Microsoft ended support for the AVI file container a decade ago.
Is there a secret QT setting, or plug-in, which will do the export without loss of quality, to an .avi or other format which bog-standard WMP on XP will play?
As demonstrated in the sample file above, the only setting that needs to be changed is the data rate. As to other possible compression formats, you could use more modern codecs like WMV 9 (Flip4Mac) or DivX 6.

Export from iweb to Wordpress

Hi
I've been running a blog via iWeb, but I've been advised to move it to something more SEO-able, and to allow log in from anywhere - Wordpress in fact.
There are quite a few entries in my blog, is there any way of exporting everything from iweb so I can import into Wordpress directly? I'd like to put all the old entries up without having to copy and paste every one.
Thanks
Nigel

Yes, if you have purchased both a domain name and hosting, then it is your server - so I have a domain name registered with hosting space from HostExcellence and that is my server space.
WordPress.org can only be loaded onto a server/hosting space as it is seen as one of the Content Management Systems's similar to Joomla and Drupal. For this you need server space and a database and most hosting companies have automatic loading of something like WordPress.org onto the sever - you just click on install and it will all be loaded onto the server for you along with the database needed.
The difference between the WordPress.org is that as it is installed directly on your server, then it is linked directly to your own domain name so the url will be http://www.domain.com/Blog or http://www.domain.com/WordPress. The last name depends on how you choose to install it on your sever. I have 2 blogs using WordPress.org on my server and the domain names for both are http://www.domain.com/Blog.
With my other host, I wanted to create the whole website using WordPress, so I installed WordPress directly onto the server, so now, when you enter my domain name direclty the whole WordPress site comes up.
WordPress.org has more templates available for it and you can customise it a little more, but the great thing is that it is installed on your server directly, so no messing around with the url http://www.name.wordpress.com. It is on your own server rather than that of WordPress.

Best way to export from FCE for compression?

Hi again, folks!
I've read/learned that, when you plan to compress your video, you should ideally export from your editing program in the final resolution (size) that you want the video to be. Apparently this is because editing programs do a better job of sizing the video than do compression programs (such as Sorenson Squeeze, which does its best work doing only compression). What I'm wondering is this: When I export to QuickTime from FCE, I have two options, namely Export as a QuickTime Movie, or Export Using QuickTime Conversion (which allows me to save as a QuickTime or other format). So, my question is, if I Export Using QuickTime Conversion, does this actually "convert" the video to some 'bastardized' version of QuickTime, or does it just reduce the size? I'm asking because I don't understand why, on the one hand, FCE refers to exporting a full size video as simply "Exporting as QuickTime" while on the other hand (eg. when I'm lowering the resolution), it's called "QuickTime Conversion" (which is lumped in with a whole bunch of other output format possibilities such as .avi, mpeg4, etc).
I'm probably not being as clear as I'd like, but more simply put, why does FCE consider going from hi-res QuickTime to low-res QuickTime a 'conversion'?

One suggestion I received (just tonight) from another forum was to export the video from FCE, but not as a self-contained movie; this way (I'm told), the video is not being compressed or otherwise altered, and hence will give me the best results when I compress
The information you received on the other forum was half right and half wrong. The difference between a self-contained movie and a movie that isn't (known as a 'reference' movie) is NOT the quality; it's that the self-contained movie is an exact copy of what's in your Sequence while the reference movie only refers to the original media and renders ... it doesn't copy it. Since reference movies rely on the original media (and render files) for playback or when used in other applications (like Sorenson Squeeze), they will not work properly on any other system nor will they work if any of the original media or render files are moved, deleted or otherwise altered.
The quality of the two types is identical.
-DH

Best way to export from FCP for website

I've been reading around about this and am not getting a clear idea of what to do...
I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
Thanks so much, anyone with ideas or experience!

We don't know what format you are dealing with, ratio etc.
However, some short answers for you.
For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

Old QT7 allowed conversion (export) from mp3 to mp4

Similar Messages

Maybe you are looking for