Old registry setting (Flash9c.ocx) refuses to go! :-(

There's one Windows registry setting that contains a reference to the file Flash9c.ocx under C:\WINDOWS\system32\Macromed\Flash\ which is so stubborn and refuses to go. Registry optimizing utilities can't alter/remove the key. When I try to manually remove the key with Regedit, appears the message 'Error while deleting key'.
I've tried going into Safe Mode, logged in as Administrator, played around with the Permission thingy, but all up to no avail. That's just like a thorn in the flesh.
Anybody ever got this issue solved, care to enlighten?
Thanks.

Anybody any thoughts?

Similar Messages

Registry can't find Flash9c.ocx

I'm having this problem on every single computer I own. The error message I'm getting is: "CLSID\{1171A62F-05D2-11D1-83FC-00A0C9089C5A}\InprocServer32," refers to a missing file, "C:\WINDOWS\system32\Macromed\Flash\Flash9c.ocx."
There doesn't appear to be an answer to this problem in the forums or on the web.
A few people ask for help, but there hasn't been a reply.
I'm running the most current version of XP and this issue is on both laptops and desktops.
I also believe this is causing the problems I'm having with Firefox crashing when using Flash.
Thanks in Advance .....

You get this error message when doing what?
I also have that entry in my registry, but I never get an error message.

HT2102 These Windows registry setting don't seem to apply to iTunes 11.x.

These windows registry settings don't seem to apply to iTunes 11.x. Are there any documents with updated registry settings? I tested the registry setting on Windows 7 with iTunes 10 and iTunes 11. There was different behavior from iTunes 11. Specifically parental controls are not locked and grayed out.

hayley7070 wrote:
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
What instructions?
In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
You don't import photos from the iPhone to your computer using iTunes.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer
Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

I am locked out of my ipad. My 1 year old somehow set an "enter passcode" . I am not an itunes user and did not sync my ipad to an account. I can not afford to lose the photos and videos on my ipad.What can I do?

Are there any options to recover your enter passcode with out losing all info on ipad. My 1 year old somehow set an "enter passcode" which is different than the "restrictions passcode" . I am not an apple user, do not have an ipone or itunes account. There for my ipad is not synced with any other device. Is my only option to lose all my pictures and video? There must be another solution in this high tech world. I can't handle losing the 1st day of kindergarten pictures and video and my toddlers 1st steps. Is there any help? This why I am a very frustrated 1st time apple user.

I'm sorry, but without a backup, there is nothing that you can do to keep the photos and your data. You have to restore the iPad now and you will lose everything on the device.
You don't need to use iTunes in order to backup. You can use iCloud for backups and I would suggest that you make a practice of performing backups on a regular bases after you unlock your iPad.
Read the very last part of the support article about if you have never synced with iTunes.
iOS: Forgotten passcode or device disabled after entering wrong ...
If you are not using iCloud and do not have Find My iPad enabled, you are really in a bit of a bind unless you know someone that has a computer running iTunes that you can use to restore your iPad. Any computer will do, since you are going to have to erase everything on the device anyway.

My iPhone has my old email set up throught iCloud. How do I reset my new username with the device without deleting everything. And if I have to delete my old account, will everything (contacts, pictures, games, apps, etc.) be erased from my phone.

My iPhone has my old email set up throught iCloud. How do I reset my new username with the device without deleting everything. And if I have to delete my old account, will everything (contacts, pictures, games, apps, etc.) be erased from my phone.

Your old ID connects to an icloud account containing all your data (email, contacts, etc.) If you then use a different ID, you will connect to a different account, which results in losing all your "apple" data, like emails, contacts, calendars, etc.
However, Apple IDs are also used to connect to an itunes store account, with is different. You can keep using the old itunes store ID to keep all your purchases (but if you change to a different ID, you will lose all purchased items) and use the new ID for icloud (but losing emails, contacts, etc. from the old account).

When opening iTunes, I get the following error message: the registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.

When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Query: Windows Registry setting to preventing installation of sponsored product apps (McAfee, etc.)

To Adobe Support and Others who might know this answer.
What is the Windows Registry Setting a admin could set on a system in order to prevent Adobe products such as Flash, from installing sponsored product applications from installing?
In this case it is McAfee Security Scan Plus. However, I also desire to prevent other sponsored apps in the future from being installed during an Adobe product update. This is a PIA for an admin to follow up on removing an an application from field systems after was was intended to be an Adobe spcifc product update.
Oracle's JAVA already have a method to disable spnsored installs. I would like to see the same from Adobe,
Yes I already know to tell people to disable checkboxes for addtional products.
Yes I already know about the direct product dowload links for Flash, etc.

I'm unaware of any such registry mod.

Registry setting for burning cds missing? how can i fix?

I keep getting an error message when trying to burn a cd that the registry setting for burning cds is missing. I've totally uninstalled and reinstalled all componets of itunes with no success. Can anyone help please.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Need Help for a ODBC Registry Setting for CR11 and CR2008 for Joins

I have used CR for a longtime. I currently have CR11 and CR12.
I want to access Clarion files that are the TPS Access Method.
There's a PDF called Cr9_Left_outer_join.pdf that's located at: http://www.radventure.nl/Portals/0/cr9_left_outer_join.pdf
This shows how to do the registry setting for a number of DBMSs/Access Methods such as TopSpeed. See PDF page 3
The registry settings that the paper describes are NOT in CR 12.
Can anybody help me find the right registry KEY and what the correct setting is supposed to be?
Thanks in advance.
Regards,
Mike Gorman

Hi Mike,
Not sure where you put or created that registry key but this is what it should look like:
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\Database\ODBC
Then create a String Value called - "ODBC Behavior" and the value is 2, or 3 if and when you can use ODBC level 3.
Close Crystal before changing any of our key values, CR will write the previous version back to the registry when closing.
Also, be aware that what ever ODBC Level 2 ( ANSII 89 ) limitations are is what that driver and CR will be limited to. Example is Left Outer Joins are limited to only one in the SQL Statement and no way around this. You should be asking them to update to ODBC 3 ( ANSII 92 standards )
Crystal dynamically reads in the ODBC client functionality and therefore no over rides in CR will make the client work, if the ODBC driver is not capable then CR is also not capable.
Your other options is to go to Microsofts site and download their OLE DB developers package and create your own OLE DB driver, or find a developer willing to do this for you. Microsoft fully supports OLE DB and I believe they are trying to discourage ODBC usage.
Another option is to use a front end app to export the data into temporary MS Access tables and then create your reports off of those MDB file. MS Access at least supports ODBC 3 so you will be able to use full join syntax and functionality. Or even better is to move to MS SQL Server which is us to date and fully support all connection methods.
Thanks again
Don

MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file. SQLIService100 - event id 274

window 2008 R2 server ---- after installing SQL 2008 R2 then applying sp2 / sp3 I noted a warning -
Note this server had SQL 2008 R2 uninstalled previously.
MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file.
SQLIService100 - source
event id- 274
user - N/A
Task category - service control.
Do we need to fix something and how do we fix this warning event?
dsk

You could search online for this warning. I was able to find http://superuser.com/questions/346264/event-log-warning-registry-setting-specifying-configuration-file-does-not-exist
where the fix is "in your registry, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTS\ServiceConfigFile
or
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\ServiceConfigFile
if value is empty then add in:
C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml"
Arthur
MyBlog
Twitter

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I get a message upon launching iTunes that the registry setting for burning are missing.

I get a message upon launching iTunes that the registry setting for burning CDs and DVDs are missing. I uninstalled and reinstalled iTunes. I didn't touch the registry. iTnes is fine except, of course, I cannot burn songs to CD.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Bridge Color Management Issue - Looking for Registry setting

We have 100 people in our office. Currently, in order to enable color management, we have to go into each person's Bridge Center Color Management Color Settings panel, select our custom color settings file and hit apply. That takes care of 1 out of 100 people.
How can we automate this process...
We would like to create a script that sends a custom color setting file to individual user's stations. Does anybody know the registry setting that controls synchronization of settings on a user level?
Thanks,
Dan

Dan,
Did you ever find such a mechanism? I am looking to do pretty much the same thing. I can get the .CSF file to the workstations no problem, but I need to set the apps to look at it for their Color Settings. My guess is that there is a registry settings somewhere, but for the life of me I cant find it.
Matt

Color Management-Looking for registry setting

We have 100 people in our office. Currently, in order to enable color management, we have to go into each person's Bridge Center Color Management Color Settings panel, select our custom color settings file and hit apply. That takes care of 1 out of 100 people.
How can we automate this process...
We would like to create a script that sends a custom color setting file to individual user's stations. Does anybody know the registry setting that controls synchronization of settings on a user level?
Thanks,
Dan

Dan,
Did you ever find such a mechanism? I am looking to do pretty much the same thing. I can get the .CSF file to the workstations no problem, but I need to set the apps to look at it for their Color Settings. My guess is that there is a registry settings somewhere, but for the life of me I cant find it.
Matt

Keep getting error message "registry setting used by itunes drivers for importing

Keep getting error message "registry setting used by itunes drivers for importing and burning cds & dvds are missing", this can happen as a result of installing other cd burning software". The only software on my computer is original cd-dvd on my hp portable with Vista. My computer now recognized itouch as a camera. Ive uninstalled and reinstalled itunes, nothing changes.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Old registry setting (Flash9c.ocx) refuses to go! :-(

Similar Messages

Maybe you are looking for