Old router broke - got new one and having trouble getting wireless to work
Hi -I've had a 1st gen ATV for about a year. I've had difficulties when my router gets disconnected or something for a while. I had it replaced today. Now I'm having a problem getting the aTV to hook up wifi.
Everything runs perfectly streaming from my computer (PC) when hooked up with ethernet. But when I disconnect - the screen does not show the router address or the dns address and the connection is lost. I know its an easy fix but I can't for the life of me figure out what to do. I'm ok with a computer but not totally tech savvy.
I've tried shutting down my router firewall and my computer firewall. I tried as suggested on the site to add the MAC info. When i run the wireless set up - it sees my new router (2wire) and goes thru that, then it says it connected or something but that I am not connected to the internet. It gives me the option to do that and it appears to work but then no router or DNS info and therefore it won't work.
Can you help?
is there any manual setting of the IP address setup on the Apple TV? If it is stuck with an old Manual setup on it, it could be not getting the new assignment from your Router.... is the router setup with DHCP enabled? Have you verified that you can connect to the internet from any other device such as an iPad, iPhone, Macbook, Notebook or wifi anything other than the apple tv?
Similar Messages
-
I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
Please I'll be thankfull.I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through. Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while. My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much. That's why I was hoping I could use the migration function piecemeal. I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.
-
How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !
If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.
-
I replaced my old iphone with a new one and i lost it i want the s/n of the new one
i replaced my old iphone with a new one and i got it without the box today my new iphone is stolen and i need the serial number of the new one
thanksRead here for the various ways to locate the SN:
http://support.apple.com/kb/HT4061 -
i have a ipod 5th gen and want to change my old account to a new one and transfer the gift cards i redeemed on it
see what has happend is i bought my daughter a new ipod and we used the old apple id to set it up witch is my wifes email address.we also bought her itunes gift cards witch she reedemed.but the problem we are having is because its my wifes email when i send her a message its going to my daughters ipod as well.so is it possible to change the email address on my daughters ipod so she has her own account.and then transfer the balance of the gift card.
Re: i have a ipod 5th gen and want to change my old account to a new one and transfer the gift cards i redeemed on it -
i have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing my contact lists and purchased apps?
okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed. Where do i find the backed up info from my phone?
-
I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists from my old PC do not appear on my new PC when I open ITunes. Any suggestions?
Copy everything from your old computer, or your backup copy of your old computer, to your new one.
-
I had to change to a new Apple MacBook Pro. I deauthorized my old computer, authorized the new one and the only media that shows up are items with a cloud. Everything that was downloaded from a cd, including personal movie files, are missing. It's as if my former library is gone. How can I find it again? Or is this just Apples way of screwing with me?
No. Firewire and Ethernet are not the same. Ethernet would be used to connect the computers to your network. A Firewire cable is used to connect the computers directly. They are different ports.
The above shows what an Ethernet port and a Firewire 400 port look like.
These are the plugs used for FW800 on the left and FW400 on the right. -
i was transferring my information from my old iphone to the new one, and i forgot that i had some pictures in the new one. i did the restoring information and the pictures in new one are gone. how can i get them back???? please
Only way to get it back is to restore your phone from a backup, if those pics were included in that backup.
But most likely those pics are gone.
What you should've done was import http://support.apple.com/kb/HT4083 the pics to your computer and after you restored from your old backup, you could sync those new pics to your phone via itunes. -
i want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ? I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money? If not does anyone have another suggestion how not to pay that much money to buy a new one and/ or maybe seling my old one for some money ?
Thank you would appreciate any help !RockayaAbdel wrote:
I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money?
No. but you can sell it privately and use the proceeds towards a newer used model. -
Having trouble getting Skype to work. It did when I first got the computer about a yr ago but then quit. I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working. Any suggestions?
all I can suggest is completley unistall as here
https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x
Then reinstall
http://www.skype.com/en/download-skype/skype-for-mac/ -
I'm trying to have existing Exchange accounts setup on my new iMac and can't get it to work.
I have existing Exchange accounts setup on my iPhone and iPad to access my work email. I'm trying to do the same on my new iMac and can't get it to work. I have it setup the same as my iPad and it asks me for my password over and over...any suggestions?
<Re-Titled By Host>Hi mwatts18,
As a preliminary troubleshooting step, you should reference the information in the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
I would especially suggest that you delete the account and re-add it, making sure that you are entering the correct password when you add the account. Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.
See if this helps...
http://pondini.org/TM/C12.html -
I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!
Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post. -
I just set up my migration from my old iMac to the new one via wifi and it says it'll take 42 hours! What's up with this?
blackeducator wrote:
... What's up with this?
Don't migrate wirelessly unless you have a very fast wireless connection. Anything other than 5 GHz 802.11n is likely to take an unacceptable amount of time.
Maybe you are looking for
-
How to enter / Post Goods receipt of Raw Material from subcontractor
Dear Experts, As standard subcontracting procedure, Raw Material Transfer posting is made to Subcontracting Vendor and the Semi finished material [Assembly] is received from the subcontractor. If in case extra or by any reason, raw material stock is
-
Consingement Stock during the availibility check
Dear All , During the availibility check I want to consider the customer consingment . E.G if the plant level stock is 300 and customer consingement stock is 30 then the ATP quantity should be 330 wen i am performing the Availibility check ...
-
When ever I try to open maps in my e 71, all I get is the earth motionless and a line that stops at 90 percent, what can I do to fix this problem?
-
i have a xml like this <?xml version="1.0"?> <?xml-stylesheet type="text/xsl" href="st.xsl"?> <Workflows> <Workflow Completed="COMPELETED" Name="CRMODWF6027"> <Actions> <Action Completed="COMPELETED" Name="SendMailAction">
-
How do i shuffle videos into a different order?
i am using prem elements 13 on windows 7