Old Time Rock and Roll with AE and Element 3D

Heres some Old Time Rock and Roll with Element 3D. View at 1080P and full frame to really rock out Element is a truly remarkable plugin that takes some playing with to get comfortable with.
http://www.youtube.com/watch?v=q_QMcgpB21Y …
(Please stop deleting this post. It relates to using Element in AE.  As a MVP for Adobe I think its valid to share and answer any questions that relate to using this plugin. If you disagree lets talk with Todd K. about this so it can be resolved in a reasonable manner. Thank you.}

As a participant in many Adobe forums I find that different folks tend to frequent them.
My thought was the After Effects forum was particularly appropriate since lots of folks are just beginning to put Element to serious use.  The Video Lounge is another totally different group of friends that I just enjoy sharing, getting feedback and starting dialogs with. And in the Premiere forum it touches upon use of dynamic link and just how solid it is today.
I see it as just targeting different groups of users. If there are no over riding legal concerns, I would hope to be able to communicate with all the various folks I have been in contact with for the last several years in this manner.

Similar Messages

  • My time capsule connotes only with ethernet and not wireless why?

    my time capsule connotes only with ethernet and not wireless why?

    Firstly, try a factory reset. This can often iron out problems like this.
    Also, what generation is your TC? What version of AirPort Utility are you using?

  • Hi, I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies. My goal is to have a unique source in my imac for my photos and movies. Thanks .

    Hi,
    I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies.
    My goal is to have a unique source of photos and movies in my imac.
    Thanks !
    Nicolas

    As  to iPhoto
    Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    For iMovie support please post in the iMovie forum
    LN

  • I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    velma Monreal wrote:
    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
    Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

  • Share Cinema Display and peripherals with MBP and PC

    Share Cinema Display and peripherals with MBP and PC
    I am about to be forced to use a business network connected PC in my office, but I will continue to bring my personal MacBook Pro to work for my personal e-mail, calendar, internet, etc. (it will be connected to a seperate open DSL network). I am thinking about getting an Apple Cinema display and trying to use this one display for both computers. I would like a way to "switch back and forth" between the two systems, all the while using the same mouse, keyboard, printer and Cinema display.
    Does anyone have any experience setting up what I am wanting to do?
    Also, how does connecting an external display effect a MBP? Can you close the screen on the MBP, turning off the MBP's display but keeping the computer running? I'd like to be able to tuck the MBP out of the way to save deskspace but still be using it via the Cinema display and peripherals...
    Thanks so much!

    You can use synergy (link: http://synergy2.sourceforge.net/) to link the mouse and keyboard across the two platforms.
    If you want to use only one display, you'll need a KVM switch.
    You can run the MBP either with it's own screen open, or shut it and use only the external screen.
    Hopefully this helps a little...

  • I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. How do I resolve this issue?

    I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?

    Starting with this, you have errors in your CSS code.
    body {
      margin-top: 0px;
      margin-right: 0px;
      margin-bottom: 0px;
      margin-left: 0px;
      color: 151515;
      font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
      background-color: EFF5F8;
    body {
      margin:0;
      color: #151515;
      font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
      background-color: #EFF5F8;
      font-size: 100%;
    Related links:
    Windows Chrome, why do my fonts look so bad? - Lee Green
    css3 - Bad font rendering Chrome - Stack Overflow
    Nancy O.

  • ME293 is a good for programming and work with coreldraw and rhino ?

    ME293 is a good for programming and work with coreldraw and rhino ?

    No there is not. You are correct that Verizon will unlock it for international use, but they will not unlock it for domestic use. That is the way the US carriers work. Fortunately, the LTE enabled phones for Verizon are different. They are unlocked at the start on the GSM side, this was a requirement from the FCC for the allocation of additional LTE frequencies for Verizon. Not sure how long this will last, but your only choice is to use Verizon or to obtain a different phone. That 4S will not work with AT&T.

  • The paper after printing comes distorted and rolled with 2 sides

    Hello! I've bought the HP LaserJet M1132 MFP All-In-One, and i've found that after printing (the quality is great) the paper comes rolled with both sides (left and right). The roll goes behind the printed side. When you put this paper on the table it's not straight, but like a hill.
    How I can fix it? Only at service?
    Paper is simple, A4 white, 80g/m2 office paper for laser printers.
    1. HP LaserJet M1132 MFP. 
    Product number: CE847A
    2. Snow Leopard 10.6.8
    3. No errors
    4. no changes
    Thank you!

    Dear Vitaly,
    You may have same output with different functions (Print/Copy)
    Make sure you output tray is empty and output tray is totaly open.
    It seems there’s no problem with the printer, Please make sure you paper is perfectly dry and the humidity is normal with in the environment. It could be the papers laying for long time in you printer’s input tray and got effected by moisture.
    Try with fresh papers from new packet.
    Goodluck!
    Tech.Pro

  • Min max lot size time based for use with SNP and PPDS

    Hi all, Is there anyway to set up time based min and max lot sizes? ie we want to have a Max lot size which is small for use with the first 3 months of our plan which starts life in SNP and then converts to PPDS and into blocks for block planning, but months 4 to 36 we want to leave as large max lot sizes as there is no need to have the small max lot sizes for the different horizon.
    As far as I can see there is only a material/plant lot size  and Max lot size and no way to have a different setting in a different time period.
    Thanks
    j

    Hi John,
    As you know, in the product master, the lot size maintenance is time-independent, so that obviously can not be used for your scenario. As per my understanding, to meet this using standard functionality, you can maintain multiple product specific t-lanes (for STRs) and PDSs (planned orders) with required lot size ranges and validity dates (for short or long term horizon). But, again since the validity of t-lanes and PDSs will not be automatically rolling forward so the updating the validities will be a challenge.
    The other option could be to enhance the heuristic functionality at lot size selection step while creating order.
    Regards,
    Umesh

  • First time editing a project with HD, and then burning it to Blu-ray

    Hey there everyone.
    *Newbie to HD editing alert.
    I have two problems regarding HD editing/export.
    I've been scouring the forums for several days, and I can't find a specific answer to what I need/want to know. Some things are understandable to a degree, and then there are things that seem way over my head.
    (One thing, I've read about third-party programs like Cineform, and such, and was told that those programs aren't really necessary. So, if there's some way to stay away from them, I'd like your suggestions on that. However, if in the end, that's the way I need to go for this to work, then I guess I will have to go that route).
    This is my first attempt at capturing and editing in HDV, so please excuse my ignorance if I refer to something in the wrong context.
    My main goal:
    To edit an HD wedding, shot with Sony FX-1 HD camera, and burn it to a Blu-ray disk.
    Here is the computer system that I'm working with:
    Dell Precision M6300; Intel Core 2 Duo T7700; 2.40 GHz 800Mhz; 4MB L2 Cache; Dual Core
    Operating System: Windows XP PRO SP3;
    - 4.0GB, DDR2-667 SDRAM, 2 DIMM Dell Precision M4300
    - NVIDIA QUADRO FX1600M 512MB TurboCache (256 dedicated) Dell Precision M6300
    - Hard Drive: 200GB Free Fall Sensor Hard Drive 9.5MM, 7200RPM, Dell Mobile Precision MX300 Factory Install
    - 8X DVD+/-RW, Data Only, Dell Precision M6300
    - NTFS file system
    I have been editing with Premiere Pro CS3 for the past year now.
    I used a Sony FX-1 when capturing my footage.
    I believe that I captured all the footage in HDV ok. (I made a new project and used the Load Preset of "HDV 1080i30(60i)"; and then captured all the footage thru CS3)
    My clip properties (when highlighted in the Project Panel) say that the clip is: an mpeg; and 1440x1080 (1.333).
    1. My first problem: I captured 4 clips (Clips 1-3 are 1 hour each; and Clip 4 is 16 mins long). When I place Clip 1 into the timeline . . . the only way I can describe how the audio plays in this clip is . . . the audio looks like it's looping the same 5 to 6 minutes of audio throughout the whole 1 hour clip. (ie: the video is one, long, flowing 1 hour of continuous video; but the audio connected to this same clip, seems to be playing the first 5 mins of the clip, and then repeats it at the 6th minute). You can 'visually' see this problem when you view the audio waveform in the timeline.
    The other three clips have no problem with audio at all.
    2. My second question is a bit more lengthy:
    I wanted to run a test of burning a Blu-Ray of this project's raw footage, to see how the workflow would go after I've edited the wedding.
    When I go to Export my timeline to Encore, on the Encoding Settings area, it seems to only let me use the Preset of NTSC Widescreen, with a 720x480 video. I don't see anywhere where it mentions that this project will be HD (which I thought would keep my 1440x1080 dimensions on export).
    The Format and Range areas are greyed out; and I can only choose a few things off the Preset dropdown.
    Am I missing a step? Or is this what will be exported, but once in Encore, it will be able to burn correctly on Blu-ray?
    Again, please excuse my naivety in understanding and/or mis-speaking my problem.
    Also on the Export Settings window, on the Output tab - should I check off 'Deinterlace' also? I've read and read about Interlace and Deinterlace, and I am confused as to "what to use when".
    So my specific questions are:
    1. Regarding the 'repetetive audio loop' on one of my clips - what could the problem be there?
    Will it export OK? Or should I just recapture that one clip again?
    2A. Do I Export to Encore directly, when I'm done with my timeline and want to go to burn the Blu-ray disk? Or do I need to make my timeline into 'one fluid file'?
    2B. If I'm supposed to make a file of the timeline:
    Am I supposed to be Exporting to Movie instead?
    (When I tried that, my settings under 'Video' showed up as a greyed out area for Frame Size, locked at 720x480 wi

    Continuation:
    2B. If I'm supposed to make a file of the timeline:
    Am I supposed to be Exporting to Movie instead?
    (When I tried that, my settings under 'Video' showed up as a greyed out area for Frame Size, locked at 720x480 with a ratio at 4.3. I changed the Pixel Aspect Ratio to "D1/DV NTSC Widescreen 16:9 (1.2)" and the ratio that shows beside the greyed out Frame Rate area does change to 16:9. But the size is still locked at 720x480.
    Shouldn't I be seeing 1440x1080 SOMEwhere along the export line? Or at least some sort of ratio that would pertain to HD?
    2C. Am I supposed to be Exporting to Adobe Media Encoder?
    And if so, should I be choosing:
    H.264;
    HDTV 1080p 29.97 High Quality;
    Output tab having 'Deinterlace' checked;
    using VBR, 2 Pass;
    leaving Target Bitrate default of 32;
    and Maximum Bitrate default of 40?;
    and should I be setting the 'Key Frame Distance' at 30 also?
    2D. When exporting, should I always Deinterlace footage?
    (I've read so much about Deinterlace and Interlace that I'm lost about the 'when to use either' aspect)
    3. If I absolutely have to use a third-party program like Cineform, at what point do you use that program? Is this used at the time that you capture the footage, and then import those files into PPCS3? Or is this a program that you use to Export your project when you're done with your editing?
    (I read all the information that Dan Isaacs posted about the "Premiere Pro HDV workflow Guide", but that was entirely too confusing to me right now, as a newbie to HDV, etc. I was going to attempt that way, but I ended up doing this post first).
    In my meandering throughout the CS3 forum regarding SD, HD, HDV, etc etc, I have picked up alot of information regarding certain problems and situations. I may have all the info in my head, and I'm just applying it wrong; or, I'm missing something in the mix? I'm not sure what it is, but I seem to be having quite a problem doing what seems to be something that should be 'easy'.
    I find this forum extremely helpful and understanding, so I'm looking to you all for help. I would appreciate any and all comments and suggestions!
    Thanks so much!

  • Old Time capsule as external hard drive and hub?

    I am thinking about purchasing a new AirPort Extreme.  I have an old Time Capsule that I would like to repurpose as an external hard drive attached to the new AirPort Extreme.  Would I still be able to use the Ethernet ports on the Time Capsule as a router to provide Internet access to a computer or printer? I am currently using all the ports on the Time Machine (Ethernet and USB) and wonder if I need a hub (Ethernet or USB) to now connect the Time Machine to an Airport Express and still handle all the existing connections or if the Time Machine can act as the hub.

    You can just plug the TC in bridge mode into your new Extreme or express.. you swapped terms freely.. Express however has only one LAN port.. and the TC will still need to use one port to connect leaving you 3 WAN ports.
    If you buy the Extreme it has 3 LAN ports.. one of which will be used for the connection and so you will add 2 LAN ports for usage on the network.. if that is not enough simply buy a gigabit switch.
    BTW if you buy an express it has 100mbit ports not gigabit.. so I do not recommend the express.. you will slow everything down 10x.
    You will gain a USB so if 2 is enough you will not need a USB hub.

  • When replying to an add on Craig's List, for example, it goes back to my old email address I had with IE, and fails to connect with the ad's author and I'd like to know how to make it use my gmail address with Firefox instead.

    When replying to an ad, via email, posted on Craig's List , for example, it attempts to use my old email address I had with IE, then fails to connect with the ad's author. How do I get it to only use my gmail address with Firefox?
    == This happened ==
    Every time Firefox opened

    See https://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Sharing Time Machine Back Up with Desktop and MacBook

    Hello,
    In preparation for my work on the road I back up my desktop using Time Machine on my Time Capsule, wipe my MacBook clean and Migrate my files to the MacBook so I can take everything. In recent years I notice when syncing my devices, that process has improved and the iPhone,iPad recognises the MacBook as basically the same as my desktop and I don't have to wipe and sync the device. Thank you Apple engineers for that improvement.
    This year is a bit different. I have done the migration, but am delayed departing. I would like to share my Time Machine back up across the two computers. Sort of a poor mans macbook sync. I would treat the Macbook as disposable and the Desktop as primary. Make changes to the iMac then update the MacBook before I leave.
    Can I use my desktop , back it up to Time Machine, then update the macbook as required? I would do this until I leave.
    Also I noticed for the first time the MacBook is running a different OS to the iMac. Will this matter to me?
    Thanks,
    Ken
    Desktop is an iMac 24 running MacOS10.6.8, 2.4 GHz C2D
    MacBook is an early 2008 running MacOS 10.6.3, 2.4 GHz C2D
    Time Capsule 802.11n, 1st Generation, version 7.6.4
    iPhone 3GS iOS 6.1.6
    iPad 2 , iOS 7.1.2

    So, the macbook today, I did get this message from the OS re TimeMachine
    "Would you like to reuse the backup "/Volume/....sparsebundle"
    The backup was created on a different computer. If you reuse this backup it can no longer be used by the original computer.
    I selected Reuse Backup. This is very convenient. I am wondering now.
    How do I select back and forth on the computer to reuse the various back ups?
    Ken

  • HH3 Rebooting and issues with Outlook and iTunes

    Hi All,
    Early last week I started to receive emails from my NAS to say that communications had been lost, this usually occured during the early hours of the morning so didn't worry too much about it. During daylight hours we weren't experiencing any noticeable problems with our various connections (hard and wi-fi)
    However, yesterday whilst working from home, my HH3 rebooted itself at a rather inoppotune moment.  Not done it today thankfully.
    This week I have been unable to purchase anything from the iTunes store.  In fact it is usually a struggle to even open it.  Nine times out of ten it will just time out and tell me to check my network connection.
    And now Outlook is playing up.  At random times, when I select a mail to view I receive a pop-up similar to this
    and have to wait 10-15 seconds for contact to be made. V.Tedious.
    I started reading through old forum posts but not being that technical a lot of the info has melted my brain. 
    I have tried a factory reset of the hub - no change on my iTunes and Outlook issues.
    I switched the HH3 Firewall off and iTunes started working again so I did what I had to do and then switched the Firewall back on.
    Today I have looked at the Hub log and I have pages and pages of 'PortMapping Add By UPNP/TR064 Error.'  Message is repeated every 2 minutes.
    If anyone out there has experienced similar problems please can you offer any help?   I have attempted to read the HH3 Portmapping (NOT) thread attempted but most of it confused the hell out of me.

    Hi,
    Thank you for your valuable feedback.
    Please follow the steps below and check if it works.
    -Open HDD-Library-Application Support-Find and Delete the entire Nokia Multimedia Transfer folder.
    -Then navigate to users-Library-Application Support -Nokia Multimedia Transfer (delete) -Applications-Nokia Multimedia Tranfer-Control Click-Show package contents.
    -Delete the entire contents folder.
    -Make sure the trash is empty.
    -Download and install NMT again from www.nokia.com/mac
    -Now connect the device
    -Go to NMT> Tools and Settings > Check for updates now
    -Reboot Mac and then transfer.
    Note: Using a 16Gb is officially not supported by the device, therefore the device might perform slow. Please check the device specification from the link provided below. http://www.forum.nokia.com/devices/N82
    Hopefully this helps
    Regards
    Sandy 
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • How can I sync my Address Book and ICal with Mac and PC with Palm Desktop?

    I now have the IPhone and I love it!!! But I have some issues and need help please. I have a PC at work and a Mac at home. In the PC I use the Palm Desktop Version 4.1.4 and I have there all my contacts (more than 1,100), all my date book (since 1998) and all my memos (about 600). I want to see what would be the best way get rid of my Palm Handheld and have only the IPhone, but I have encountered some problems and many steps. Everyday I have to sync the Palm Handheld at work, then sync the Palm Handheld at home with my Mac (using The Missing Sync, but it takes a long time every time), then sync the IPhone. Can you please help me??? How can I sync my data from my PC (Palm Desktop) with the IPhone? Another, thing; I do not want to use Outlook at work because the information that I want to sync (Palm) is my personal data and I want to keep using the Palm software for that.

    aflores48,
    Unfortunately, the iPhone is not designed to sync with Palm software. As stated in the minimum system requirements, the iPhone can sync with Outlook (2003, 2007 or Express) on a PC, or with iCal and Entourage on a Mac. If you do not want to use Outlook on the PC, you can sign up for a free Yahoo account and sync with Yahoo Address Book. Yahoo Address Book can be used to sync from PC or Mac. More information on the minimum system requirements for the iPhone can be found here:
    http://docs.info.apple.com/article.html?artnum=305703
    More information about syncing the iPhone with your computer (including Yahoo Address Book) can be found here:
    http://docs.info.apple.com/article.html?artnum=305741
    Hope this helps,
    Jennifer B.
    Message was edited by: Jennifer_B

Maybe you are looking for