Old transient recorder, new GPIB-card (+Labview) How?

Hi, we have an old 12 channel 200kHz transient recorder
(Krenz TRC 6410). Until now, the software is still MSDOS. Since we have a GPIB NI card, I wondered if we can't get this to work together, but I'm a complete newbie. I had a look at some other VI's for a Yokogawa Freq. generator, but the recorder's documentation looks
quite different. Here's what I found out:
1. Once I managed to find the device in MAX. It registered under PA 4, SA 0, like the manual said. But after some trials (which got me nowhere) and a reboot, the device won't show up anymore.
2. In IBIC, when I use ibln 4 0, it says Listen: True,
so this device is there.
3. I would be very glad if I could somehow switch the Voltage selector remote!
To do that I have to transmit two bytes, e.g. 129 and 4 (129 is adc-channel, 4 is new voltage level). But before the first byte, I have to send GET, and after the first byte, SDC.
Help, I failed miserably so far :-)
Any help is appreciated, e.g. ibic sequences, labview examples, whatever. I what to make sure that this works
before investing to much work into it.
Thanks in advance,
Dirk

Hi Dirk,
1. Please go to www.ni.com/support. Then celect GPIB and after that, select Interactive Control Utility. Here you will find a list of command sequences.
I hope I have understood your problem.
2.Regarding LabVIEW examples, please go to www.ni.com>>NI Developer ZONE>>Development LIbrary>>GPIB. There are a lot of examples. And I hope this will help you.
P.S:
I could not understand what do you mean by trials. Because how can the trials prevent the device from showing up.
In IBIC where you did ibln, also try ibwrt and ibrd and see if it works.
Please do get back if you have any further questions.
Sincerely,
Sastry V

Similar Messages

HT201266 Any way to delete old and add new credit card pmt on iTunes without old card security code?

Shredded old credit card because it expired. It was the card used for iTunes purchases. Cannot add new credit card info without first inputing security code from old card. Any suggestions how to remove the card without the code? Or perhaps add the new card and make it default payment method?

Call and ask your credit card issuer.

My website has been disabled as my credit card had expired but I'm unable to login to even enter my new credit card details - how do I make payment?

My website has been disabled as my credit card has expired. I'm unable to get into the admin section to input my new credit card (I get an error message telling me there's an outstanding invoice). How can I get in to enter my new card details so that payment can be made?

You can
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
You can have apps purchased from more than one account. It does complicate update apps though.
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Want to move documents from old pages to new pages format. How?

Want to move/change pre-Yosemite Pages documents to the new Pages format. How?

As I mentioned earlier, the Pages v5.5 document architecture is alien to Pages v5.2.2 on Mavericks. Yes, you can drag/drop the v5.5 document onto an open Pages for iCloud beta session. No, you cannot download this v5.5 document to Mavericks, and successfully open it in Pages v5.2.2. You get this familiar greeting.
Plan B is to open the document in Pages for iCloud beta. On the toolbar, click the Wrench icon, and choose Download a copy, and then pick Word. By the time you go through all this nonsense, you could have selected Share > Send a Copy > Mail > Word and opened via email on Mavericks.
Of course, if one had started their word processing in Office for Mac 2011 Word, this obtuse means of backward document sharing would have been an non-event.

How do I get my music from my account on old computer to new computer? And how do I have two seperate itunes accounts on one computer?

I had my music on my itunes on my old computer (pc), and need to move it to my husband's computer. My husband and I both have iphones and want to keep using our seperate itunes accounts on one computer, as we both have our own media set up on our accounts. I had burned my music from the old computer onto discs and imported onto the new one...works in the library but I can't put them into playlists, which means I can't put the music on my iphone. As for using two seperate accounts on one computer, it was suggested to me to make another profile on windows (vista), and use the second account on that profile. I did that and have had such a frustrating time trying to get this to work. I don't know if I've done something wrong, but it's just headache after headache. Somehow my apps even ended up on my husband's account? Also, how can we share music between our profiles? It seems ridiculous that we should have to buy an album twice just because we have to different accounts. I would be willing to create a third joint account with my husband, but only if we can still have our own music, apps, etc, and can somehow transfer the music we have to this new account...if possible. Suggestions please???? I'm so close to pulling out my hair over this!!!

You'll need to copy the music currently on your iPod to your new PC and into iTunes first before you can sync it to the new iPod.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Imported mail library from old Mac to new one ... how to ...

I imported my "mail" and "mail downloads" folders from my old mac's library to my new one ... all my messages are still in there, but im just wondering on how to make them show up in my new mail
Thanks for any help

You talk about “importing”, but it looks like what you really did was just copying those folders. Also, it looks like you copied the folder where the messages are stored, but not the file where the account settings are stored...
Mail stores most preferences and all account settings in ~/Library/Preferences/com.apple.mail.plist (except the passwords, which are stored in the keychain). Everything else, including all your messages and mailboxes, is stored within the ~/Library/Mail/ folder.
If both computers are running the same major version of Mac OS X, copying these (the preferences file and the entire Mail folder) from one computer to the other is all you need to do in order to have an exact copy of all your messages, mailboxes and Mail settings on both computers.
Similarly, Address Book (which you may want to transfer as well) stores the settings in ~/Library/Preferences/com.apple.AddressBook.plist and the data in ~/Library/Application Support/AddressBook/.
In order to avoid potential permissions issues, copy the files operating on the destination computer and while logged in as the user that’s going to use them. Also, be sure the affected applications aren’t running on either computer while doing that.
Alternatively, you may use Migration Assistant:
Transferring data with Setup Assistant / Migration Assistant FAQ
BTW, there is no point in transferring the ~/Library/Mail Downloads folder. The files that Mail puts there are just temporal copies to let you open the attachments in other applications without having to manually save them first. Unless you’ve modified any of those attachments after opening them and haven’t saved them elsewhere, there is nothing in that folder that needs to be preserved. The attachments themselves are kept as part of the messages.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Migration of old server to new server...how??

Hi all...
I am here to discuss about some information to how migrate a server from old machine to a new server??
can someone provide some good links??
i did searched on google but didnt quite understood the whole thing.
Currently server is sql 2005 and in new server also i want the same .

hi
Refer this kb article for moving databases from one server to another server
http://support.microsoft.com/default.aspx/kb/314546
There are 4 ways to move/copy a database from one server to another server using SQL Server Tools.
i) Detach the database from the old server and attach it in the new server. This is purely offline operation and it moves the database instead of copying it.
Refer http://msdn.microsoft.com/en-us/library/ms190209.aspx : how to use attach/detach database in SQL Server Management Studio(SSMS)
ii) Back up the database in the old server and restore it in the destination server. This can be performed during online and it creates a new database in the destination server.
Refer http://msdn.microsoft.com/en-us/library/ms187048.aspx for more information.
iii) Using copy database wizard in SQL Server Management Studio.
Select the database in the source server in SSMS
Right click ->Tasks->Copy Database Wizard to launch the copy database wizard.
Enter the source and destination credentials and select either attach/detach or SMO type
click next and you can schedule or run immediately
Click finish to execute it
Refer http://msdn.microsoft.com/en-us/library/ms188664.aspx for more information.
iv) The last type is to generate the create script using Generate Script Wizard (SSMS) and execute it in the destination server.
Select the database in the source server in SSMS
Right click ->Tasks->Generate Scripts Wizard to launch the wizard.
Select the various scripting options needed and select the objects needed to generate the scripts for them. Make sure script data = true in the scripting option to generate script for data as well (INSERT statements)
click next ->next and finish to generate the script (new query window or clip board or file)
connect to the destination server and create the new database in it.
Click new query window and paste the script generated using GSW above and execute them with the destination database context.
Refer http://msdn.microsoft.com/en-us/library/ms181421.aspx for more information
v) Using Transfer Object in SMO
Sample code:
ScriptingOptions so = new ScriptingOptions();
so.ScriptData = true;
Transfer t = new Transfer(db);
t.CopyAllObjets = true;
t.options = so;
t.TransferData();
Note: Transfer class is available in Microsoft.SqlServer.SmoExtendedClass.dll (SQL Server 2008)
or Microsoft.SqlServer.Smo.dll (SQL Server 2005)
There are various member variables to be configurable. Also ScriptingOptions class object can be created and assigned to the transfer object as well.
set ScriptData = true in order to transfer data also. It copies the destination instead of moving the database
Refer http://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.transfer.aspx for more information.
Does this helped?
Thanks
Sreekar

Old computer Windows new one Mac. How do I switch my iPod

Okay so I'm getting a new iMac tuesday. This computer is horrible so I want to start loading music into my new one. How do I switch my iPod video from windows to apple?
I'm asking this because I plugged my iPod mini into a friends apple and it no longer worked on my windows. I was lucky I was soon getting a new one but that is not the case here, so I would reallyreallyreally hugely appreciate some help. Thanks soso much
-Rebecca
=]

Apple has done such a great job with the iPod that it is easy to forgot how complex the entire system is. The hardware is the easy part, it is the software that's really complex. iTunes catalogs our music and lets us arrange our playlists but it also keeps track of authorized music, play counts, songs skipped, and all the other things that the iPod and iTunes keep track of together. Others have designed credible mp3 players (Sans Disk for example) but no one has put together anything that can rival the iPod<->iTunes<->iTunes Store.
Which brings me to the point of this post. When something goes wrong it can be difficult to determine just what the problem is. When someone's iPod fails to sync, the quick conclusion people tend to reach is that there's something wrong with the iPod, but as you discovered that isn't necessarily the case. A failure to sync can be hardware related (iPod, computer, cable) or software releated (iPod, computer, iTunes) and unfortunately we don't always get an error message that pinpoints the problem.
In your case the problem was with music on your computer's hard drive. If you haven't already done so, I'd urge you to run a disk diagnostic and if possible back up your music. There are two possibilities: those songs have always been defective on that computer and you just now discovered it, or, those songs were okay and have 'died' since the last time you played them. If the former is true you'll want to check out the songs you added at the same time and/or from the same source. If the latter, you may have some serious hard drive issues developing.

I had a data migration done from old iMac to new iMac, how do I use that file to find my old email contacts, Safari bookmarks, etc ?

I recently had a data migration from old iMac to new iMac 11.2
How do I use that data file to get old email contacts, Safari bookmarks, etc ?

FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.

How do let Appel know that I have a new debit card

II'm not able to charge products through Apple today because I have a new Debit card. How do I let apple know about my new card# thank you

Patricia ..
You can add your debit card to your account > iTunes Store: Accepted forms of payment

Download old library to new itunes

can I download old library to new itunes library? how?

How to use your iPod to move your music to a new computer
http://docs.info.apple.com/article.html?artnum=300173
The above method would work with a standard external hard drive as well.
Copying from iPod to Computer thread...
http://discussions.apple.com/message.jspa?messageID=3536077#3536077
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

I have a digital storage oscilloscope tektronix 2430,and an old style GPIB card (8 bit, ISA). How can I work with labVIEW?

My GPIB card is NI one, but it is 8 bit-ISA. I have LabVIEW (4.,5.1 and 6i version). I want to work with my digital storage oscilloscope Tektronix 2430. I need your experiences.

Hi there,
My suggestion is start try with "MAX" to communicate with your scope,
Download the driver for the scope from NI.com. And from there you can get started.
Good Luck and if you need any help, just post in this forum.
When you feel sad, laugh

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD ?

it has to be unlocked by your carrier. give them a call

How can i change my old master card account into my new master card account in app store?

HOw can i change my old master card account into my new master card account?

Howdy Aldringwapo,
Thanks for using the Apple Support Communities.
To change the payment information associated with your Apple ID, follow the directions in the article below.
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
Have a good one,
Alex H.

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

Old transient recorder, new GPIB-card (+Labview) How?

Similar Messages

Maybe you are looking for