Old unifinished CREATE INDEX keeps running with any new transport

Hello,
In an old transport, there was a request to build an index. We had to stop this transport, because there was no room for the index (it would grow to about 10GB). Now every time I start the import of a transport, it first does the commando CREATE INDEX.......
I already removed the entries in the TRBAT(G) table and restarted SAP, but all without any effect. Does anybody know a solution for this, where SAP also saves what it still has to do?
thanks in advance,
Jurriaan Maas

Hi Jurriaan,
I'm not 100% sure about this one but the DB might be still trying to create the index... have you restarted the DB?...
Regards
Juan

Similar Messages

  • Is the Tiger 10.4.x can run with any new computer like 2.66Ghz or up

    Is the Tiger 10.4.x can run with any new computer like 2.66Ghz or up?

    No,
    Earlier Intel Macs in this CPU range came with OS X 10.5 Leopard as their basic, installed OS X version.
    Later models in this range came pre-installed with either OS X 10.6 Snow Leopard or OS X 10.7 Lion or OS X 10.8 Mountain Lion.
    Sorry,

  • HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

    I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.  Any Suggestions?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • Internet connectivity circle keeps running with all apps closed in IOS 7.1

    Please help. Internet connectivity circle keeps running with all apps closed in IOS 7.1.
    This only started to happen after the iOS 7.1 update !
    Happened twice. Goes away after restarting the phone.

    I can confirm all bugs detailed by 'Taxes', above, and would add that Calendar suffers from similar 'swipe' issues to Safari!
    Doesn't anyone sit down and 'play' before release to check if these bugs have been exterminated?

  • I have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth.

    i have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth
    can not find any other device .like my car CD or other bluetooth audio device even my laptop.
    i will be grateful fi some one can help
    best regards
    sam

    And I forgot to mention I have just changed email addresses so with the old email it was all working then with the new email I'm only functioning one direction.

  • I have a sync key, and have a new computer terminal, but when I enter the account details I created, it syncs nothing with my new computer. How do I fix this?

    I have a sync key, and have a new computer terminal, but when I enter the account details I created, it syncs nothing with my new computer. How do I fix this? There is nothing showing up when I sync with the sync key from my old terminal.

    ''NexGenCN [[#question-1038230|said]]''
    <blockquote>
    I recently had to do a wipe on my laptop. I saved the sync key but there was no mention of a sync account prior to doing the wipe. I saved the key and when I did the wipe it asked me to make an account, which I had not done, but now I am seeing no where to put in a sync key code. did they make them unusable now or something?
    </blockquote>
    You are probably trying to use old Sync with Firefox newer than version 29,
    and they did make old Sync unusable on fresh installations of newer Firefox.
    You can uninstall that newer Firefox, then install Firefox 29 from here:
    https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/29.0.1/
    Apply your sync key code, then update that installation to current Firefox,
    then migrate to new Sync:
    https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync

  • [svn:bz-trunk] 5137: Fix failing security tests on BlazeDS/ trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new /clean session.

    Revision: 5137
    Author: [email protected]
    Date: 2009-03-02 10:28:59 -0800 (Mon, 02 Mar 2009)
    Log Message:
    Fix failing security tests on BlazeDS/trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new/clean session. It looks like some test methods were leaving some things in a bad state which was causing the next test that ran to fail. These may be legitimate bugs/issues so we should investigate further to see what sequence of events gets things into a bad state but for these tests we want all of the test methods to run in isolation.
    Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/MessagingAuthProSendTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/MessagingAuthProSendTest.mxml
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/qa/messaging/SessionManager.java

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

    MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Creating a QuickTime movie with the new Canon T5i  camera in iMovie 9.0.9.

    Help needed creating a QuickTime movie with the new Canon T5i  camera in iMovie 9.0.9.  The project is done and looks good...I need help understanding what settings need to be set so I can make a QuickTime movie in the highest quality that would fit the ratio of 16.9 to be sent out to my YouTube page.  I played around with some of the settings and have not come with the right setting for the video.  I want the highest quality with the lowest amount of megabytes…thanks

    I would suggest using SHARE/EXPORT MOVIE and choose 1920x1080 (if your source material supports this).
    That should work well in YouTube.
    If you want to go further with custom QuickTime settings,  here are some that should work, but in my experience, it will be no better than using SHARE/EXPORT MOVIE.
    follow the instructions below to create a .mov video that will work on YouTube:
    In iMovie, select Share > Export Using QuickTime
    Next, you may want to check your Options to verify that the following settings are correct:Video settings
    Compression Type: H.264
    Frame Rate: 30 is preferred. 23.98, 24, 25, 29.97 are also acceptable.
    Data Rate: Automatic
    Key Frames: Automatic
    Frame Reordering: Unchecked
    Audio/Sound settings
    Format: AAC
    Click Show advanced settings and choose Constant Bit Rate as encoding strategy
    Other settings
    Size: Choose the original size of the video
    “Prepare for Internet Streaming”: Fast Start

  • TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

    Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
    I`ve tried restarting, rebooting, nothing works.
    The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

    Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/.  . The more people that bring this to their attention the faster it will get fixed

  • What causes my iphone 5s to keep on running out of memory with any new download. I recently updated to  ios 8.2

    What causes my iphone 5s to keep on running out of memory without any new download. I recently updated to  ios 8.2

    I meant to say without downloading or receiving anything

  • Difference between Create Index without and with Parallel Clause

    Hi all.
    I want to know the difference between Create Index with Parallel clause and Create Index without Parallel clause.
    Any documentation.
    Thanks,
    Hassan

    Sure?
    dimitri@VDB> create table t parallel 3 as select * from all_objects;
    Table created.
    dimitri@VDB> set autotrace traceonly
    dimitri@VDB> select * from t;
    40934 rows selected.
    Execution Plan
    Plan hash value: 3050126167
    | Id  | Operation            | Name     | Rows  | Bytes | Cost (%CPU)| Time     |    TQ  |IN-OUT| PQ Distrib |
    |   0 | SELECT STATEMENT     |          | 40601 |  5075K|    50   (0)| 00:00:01 |        |      |            |
    |   1 |  PX COORDINATOR      |          |       |       |            |          |        |      |            |
    |   2 |   PX SEND QC (RANDOM)| :TQ10000 | 40601 |  5075K|    50   (0)| 00:00:01 |  Q1,00 | P->S | QC (RAND)  |
    |   3 |    PX BLOCK ITERATOR |          | 40601 |  5075K|    50   (0)| 00:00:01 |  Q1,00 | PCWC |            |
    |   4 |     TABLE ACCESS FULL| T        | 40601 |  5075K|    50   (0)| 00:00:01 |  Q1,00 | PCWP |            |
    --------------------------------------------------------------------------------------------------------------Looks like PQ to me.
    alter table t noparallel;
    Table altered.
    dimitri@VDB> select * from t;
    40934 rows selected.
    Execution Plan
    Plan hash value: 1601196873
    | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT  |      | 40601 |  5075K|   135   (1)| 00:00:02 |
    |   1 |  TABLE ACCESS FULL| T    | 40601 |  5075K|   135   (1)| 00:00:02 |
    --------------------------------------------------------------------------Same if we use an Index:
    dimitri@VDB> create index t_idx on t(object_name) parallel 3;
    Index created.
    dimitri@VDB> select object_name from t;
    40934 rows selected.
    Execution Plan
    Plan hash value: 4278805225
    | Id  | Operation               | Name     | Rows  | Bytes | Cost (%CPU)| Time     |    TQ  |IN-OUT| PQ Distrib |
    |   0 | SELECT STATEMENT        |          | 40601 |   674K|    50   (0)| 00:00:01 |        |      |            |
    |   1 |  PX COORDINATOR         |          |       |       |            |          |        |      |            |
    |   2 |   PX SEND QC (RANDOM)   | :TQ10000 | 40601 |   674K|    50   (0)| 00:00:01 |  Q1,00 | P->S | QC (RAND)  |
    |   3 |    PX BLOCK ITERATOR    |          | 40601 |   674K|    50   (0)| 00:00:01 |  Q1,00 | PCWC |            |
    |   4 |     INDEX FAST FULL SCAN| T_IDX    | 40601 |   674K|    50   (0)| 00:00:01 |  Q1,00 | PCWP |            |
    -----------------------------------------------------------------------------------------------------------------Everything done on a single CPU (also only one core in the CPU) AMD Box.
    Dim

  • How can i delete my old verify E-Mail and register with my new E-Mail into Creative Cloud App on the PC?

    I want to register with another Account into my Creative Cloud. When i download Creative Cloud, they always say that i must accept and verfiy my E-mail at my e-mail adress, but i have forgotten the whole password of my e-mail. So i created an new adobe account and wanted to login with this account into creative cloud. but everytime i am in creative cloud i only can accpet and verify the old email, i can't do something else. i uninstall creative cloud and install it again from the new accout, but everytime i only can verify the old email. Could anybody help me and say how i can register with my new email , so that i can verify with my new email?
    I got an PC with Win7.

    I did, but they can't help me too. I uninstall the App, and reinstall it like 10 times, and everytime it is this: (Screen: Screenshot by Lightshot)
    I don't know anymore the E-Mail Password, because it was just an fun E-Mail Adress.
    Could anybody help me and say how i can register in the Adobe Creative Cloud App on my Desktop with my new Account?
    But thanks for the help attempt Sheena.

  • Does studio display CRT work with any new machine at all??

    My old G4 just died. I got a mini but can't figure out how to connect it to this 17" CRT. Is there any new machine compatible with this old CRT? Do I have to find another G4 to work with it or do I have to dump it?
    Please help

    Thanks hsurfer. The link you have provided gives a helpful insight. Those with the macbook pro are able to switch from their 9400 graphics card to the better 9600 graphics card, which resolves the issue, at least with the samsung monitor. We who have the macbook however do not have the option. The problem does seem to clearly emanate from the macbook graphic card, lets hope that a fix is still around the corner, the latest firmware update clearly did not resolve it.
    Im still looking for success stories, anyone who can say that their specific external 22'/24' monitor works fine with the new macbook?
    kind regards
    allan

  • Adding/keeping music with a new computer?

    I understand that it sounds like with the new features, one can transfer music from the iPhone to the computer. But am I still going to be unable to manually add imported music from my computer onto my iPhone? I'm concerned in part because my computer is about to die, and I don't want to have to put all of my old library onto my new computer in order to be able to add any newly-imported cds onto my iPhone. Thoughts?

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Maybe you are looking for