Old values are displayed when i click the back button of the browser

Hi all,
I am having a INPUT screen having 2 textfields and a "Confirm" button. When user enters values in these textfields and clicks on "Confirm" button, another CONFIRMATION page is displayed where these values are just displayed as h:outputText. But when user clicks the back button of the browser previosly entered values are getting displayed in the INPUT screen. My question is how to remove these values or set to null on click of the Back button of the browser?
Thanks in adv.

Hi,
i believe this should handle the browser. For instance, you have to tell him with meta tags, not to cache the website. Until yet I didn't succeed in doing so!
With kind regards,
Lutz Steinfeld

Similar Messages

I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

When I click on a result of a Google search and then go that web site, the Back button on the toolbar is grayed out and I cannot return to the search results.

When using FF3.6 and making a Google search, when I click on a result and then go that web site, the Back button on the toolbar is grayed out and I cannot return to the search results without going to History. This does not happen all the time; about 1/2 of the time.
This problem is not limited to Google, but occurs with other sites as well.

If you are talking about searches from - http://www.google.com/ - are you logged into a Google account all the time? If so, check your "Search Settings" from the "gear" in the upper-right corner of that Google search page and see if you have '''Open search results in a new browser window.''' check-marked, at the bottom of that preferences page. When that is check-marked and you have Tab options in Firefox set to '''Open new windows in a new tab instead''', you will get search results always opening in a new tab instead of the same tab. As to why that works different for "sponsored links" I don't know, I haven't seen the "sponsored links" for years now, I have a GM script that blocks those advertisements.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
This problems has been occurring on two different machines over the last two days.

I think this may not be a browser problem but rather a Google problem.
I am getting the same problem with the Google Chrome browser.

Issue of data getting wiped out when user clicks on back button..

Hello Gurus,
I have a selection program which displays ALV on execution. Now I have programmed the "Back" Button of standard toolbar so that when comeone clicks on it, it should leave to selection screen.
WHEN 'TBACK'.
LEAVE TO TRANSACTION SY-TCODE.
But when I do that, the values entered by user during execution of selection screen wipes out and all the selection fields become empty. How can I make sure that when sure clicks on 'Back' button, the selectiuon screen is presented but with values in which user put during execution.
Regards,
Rajesh.

Hi Rajesh ,
Leave to transaction sy-tcode is as as good as call transaction...so basically using this statement will start the transaction afresh..and give a new selection screen....
Better option would be to leave to screen 0 (preferaby used for a report )which will take you back to the previous screen processed or leave to screen XXXX for a particular screen( in case of a module pool )
Hope it helps
Regards
Byju

LOve Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Love Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Please do the following. 
#Click the Firefox button, go to '''Options '''| '''Options''' | '''Privacy'''. 
#In the dropdown menu at the top, change it to "'''Use custom settings for history'''" 
#Checkmark the option: "'''Remember Search and Form history'''". 
#Remove the checkmark from: "'''Clear history when Firefox closes'''".

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran.

There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.

I've had several users complain of receiving this message after they have filled out and submitted a form.
There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.
However the data is being saved in forms central. I can't duplicate the issue on my end but it seem to be happing frequently with other users.

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Hello there i am a Mac user and i don't have the "Back" button neither the "next "button on my toolbar

i just have downloaded Firefox.4 and unfortunately the "Back "Button and the "next" button are missing in my toolbar and i can't see them when clicking on "customize toolbar"
i also have bookmarks on my toolbar that disappeared!
In the Previous version of firefox ,i had many bookmarks on my toolbar but couldn't see them all,i had to make a right click to see the ones that were not in my toolbar,this function disappeared which is a little annoying
Would you mind helping me please?
Cordially

Click on the Desktop or open a Finder window. Select Preferences from the Finder menu. Click on the General icon in the toolbar, then check the items you wish displayed on the Desktop. Similarly click on the Sidebar icon to configure what appears in the sidebar.
These preferences can be all different for each user. When you create a new user your pre-sets are not duplicated in the new account.

On certain websites, my own, that use flash the pages do not work if you use the back button in the browser. They have to be refreshed before any of the links will work again. Very frustrating.

When I am browsing my own sites (2 of them) which are built in Flash, everything is fine following the links on the pages. But if I hit the back button in the browser, the pages freeze up and none of the links work anymore. If I refresh the page, then the links work fine.
This does not happen on Safari as after pressing the browser back button, all is well.

Dear jscher2000, thank you for your response! I'm running 16.01 version, so the 3.6.20 version isn't the correct one. I've updated it yesterday.
I also have to mention that today everything seems to work just fine! :) I don't experience the problems anymore and all links work again just normally, eventhough I'm logged into Facebook account. Maybe it was just a temporary bug.
I couldn't say what was the reason to that solution, but I'm glad there aren't problems anymore with Mozilla.
Thank you again and best regards,
Nina

How to disable or redirect the back button on the browser tool bar

I am creating a web help file for a web based software
application. I am using context sensitive help, when I click on the
help for a topic and close the window, when I click the Back button
on the Internet Tool bar it goes back to the help instead of the
software.

Doubleposted: [http://forums.sun.com/thread.jspa?threadID=5379620&tstart=0]. Please continue over there.
Please do not use the back button to edit a message. You're going to repost the message. Just use the message's edit button instead.

Instead of hitting the "back" button on the toolbar, where is the drop down to go back 2-3 pages?

I used to be able to go back a few pages at a time until the latest upgrade. Now, if I click the "back" button on the toolbar I can only go back 1 page at a time. This doesn't always work and I have to go back to my original starting point which could be 10-15 click back ... is there anyway to get the option to go back multiple pages like before or can I just not use certain web pages anymore?
thank you!

Use this to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

BDC - How to ignore skipped screens when user click on back button

Hello all,
I am working on a module pool program. From this custom transaction I am calling a standard SAP screen using BAC call transaction. I am calling this screen by skipping 2-3 screens and user can directly see the 3 screen on an event on my custom transaction.
Now my issue is whenever the user want to back, he clicks on back button then user have to back from all the screens that I skipped.
Is this any way by which if user click on back then he can directly go to my custom transaction.
Please suggest.
FYI..
I am calling IA06 - Inspection characterstics screen from my custom screen using BDC.
Thanks,
Sanket Sethi

Hi Jovito,
I also think the same that it's not possible. Now my issue is how to get my requirement.
FYI..
To open Classification screen directly we have a function module CLFM_OBJECT_CLASSIFICATION. But if I want to open IA06
Inspection characterstics screen we don't have any FM or API to do the same.
So how will I get my requirement done. That why I use the BDC call transaction to open IA06 Insp. characterstics screen but here I am facing this Back issue.
Please advice if there is any suggestion.

Is there any way to disable the back button of the browser?

Hello,
I dont want to cache some pages in my application so that they will not get back when back button of the browser is clicked.
Is there any way for that?
I also want to know if the back button can be disabled.
thanks in advance
vakvarma

Eh, What's happening to this forum. I read the thread, and clicked back, and got this:
alTextPo 2000 sition)); else setUI(new CloseableTabbedPaneUI(horizontalTextPosition)); } /** * Allows setting own closeicons. * @param normal the normal closeicon * @param hoover the closeicon when the mouse is over * @param pressed the closeicon when the mouse is pressed */ public void setCloseIcons(Icon normal, Icon hoover, Icon pressed) { normalCloseIcon = normal; hooverCloseIcon = hoover; pressedCloseIcon = pressed; } /** * Adds a <code>Component</code> represented by a title and no icon. * @param title the title to be displayed in this tab * @param component the component to be displayed when this tab is clicked */ public void addTab(String title, Component component) {

Problem with the back button in the Alv ouput

i have refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to click the back button thrice to come out to the selection screen ,if have refreshed the ouput screen twice .
if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming to selection screen without any problem but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .

Hi Brahmananda,
Please try to understand the flow of program and the screen navigation
the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
try using
in PAI
module exit at exit-command
in program
module exit
case ok_code
when 'BACK'.
LEAVE PROGRAM ( or any thing that you want it to be )
endcase
endmodule
regards
Ramchander rao.K

Old values are displayed when i click the back button of the browser

Similar Messages

Maybe you are looking for