Old vsn of Skype loads on startup

An old version of Skype loads on startup despite the latest Skype version being listed in Applications? why?

Trash the old version and it's preferences, restart your computer and empty the trash. If that does not work, post in Skype's forum community.

Similar Messages

Every time i restart an old version of skype loads even though i have a new version installed

The old application shows up on my desktop also and no matter how many times i drag it to trash, it comes back up at restart. So i think that is the problem.

Try selecting the Skype than needs to be deleted and press "Command+Delete" to skip the trash and instantly delete it. If that does not work then try deleting both and installing a fresh copy.

Servlet failed to load on startup

Hi all,
I recently added a new servlet definition to my web.xml file, and specified a <load-on-startup> value of 1 for this servlet. Even though this works and the new servlet gets initialised properly, one of my old servlets with a <load-on-startup> value of 2 has stopped working. There were no changes to this old servlet, and it was working fine before. I get the following error from the weblogic logs. I have tried swapping the load order around but that doesn't make any difference. Any suggestions as to why this could happen?
Thanks in advance
<Nov 14, 2005 1:34:59 PM SGT> <Error> <HTTP> <BEA-101216> <Servlet: "action" failed to preload on startup in Web application: "/".
javax.servlet.ServletException
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:884)
at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:848)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:787)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3260)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3205)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3182)
at weblogic.servlet.internal.WebAppServletContext.setStarted(WebAppServletContext.java:5663)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:869)
at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2022)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2063)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.activateContainer(SlaveDeployer.java:2592)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.doCommit(SlaveDeployer.java:2515)
at weblogic.management.deploy.slave.SlaveDeployer$Task.commit(SlaveDeployer.java:2317)
at weblogic.management.deploy.slave.SlaveDeployer.commitUpdate(SlaveDeployer.java:608)
at weblogic.drs.internal.SlaveCallbackHandler$2.execute(SlaveCallbackHandler.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

I am running into the same error. Has anyone been able to find a solution?
thanks.

Skype loads after every restart

Hi,
Every time my macbook restarts, Skype tries to load. Why is that? I do not want that to happen. I have also gone to "System Preference" > "Users and Groups" > "Login Items" and have made "Skype" hidden by checking in the right box. Still Skype tries to load after restart.
Cheers,

If you do not want it to automatically load at startup, then select it on the Login Items screen, then click on the "-" sign at the bottom to remove it from your startup apps group.
GB

load-on-startup problem

Hai all,
I want to run a servlet on start up
i did following
1) Add following to web.xml
<servlet>
<servlet-name>Schedular</servlet-name>
<servlet-class>com.abc.xyz.Schedular</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
2) copied the file to com.abc.xyz
but when i restarting iam getting following errror
Cannot load Servlet name
my java files shown below....am around it
import java.util.Timer;
import java.util.TimerTask;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Schedular extends HttpServlet {
Timer timer;
public Schedular(int seconds) {
timer = new Timer();
timer.schedule(new RemindTask(), seconds*1000);
class RemindTask extends TimerTask {
public void run() {
System.out.println("hai !");
timer.cancel(); //Terminate the timer thread
public void init(ServletConfig config) throws ServletException {
     super.init(config);
System.out.println("About to schedule task.");
new Schedular(5);
System.out.println("Task scheduled.");
public void service(HttpServletRequest request, HttpServletResponse response)
     throws IOException, ServletException
               System.out.println("servee.");
}

In web.xml, you say the servlet class is com.abc.xyz.Schedular but your servlet isn't in the package.
You need to add the following to your servlet...
package com.abc.xyz;Hope this helps,
JEB

Date/time icon and other movable icons on menu bar cannot be loaded on startup,but it works if manually loaded

Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when you get into System Preferences and manually turn them on, as well as iStat Menus
However, some other icons didn't bother, things like BetterTouchTool, NewsBar. They are immovable!! I guess it is the key factor that the icon is movable or not making the difference.
Someone please lend me a helping hand?
I've attached some pictures in order to make my situation easier to be understood.
these icons can't be loaded on my loggin in.
but they can be loaded manually
however, these icons will be loaded on startup
I've almost despaired to resolve it . Thanks for your help!

I have a similar issue. When the computer goes into "Hibernate" mode -- that is, it loses power while sleeping and it writes the contents of it's memory to disk in order to boot into that exact configuration when woken up -- many of my icons when Apple-Tab'ing to another application appear as static. They look like a slightly colorized version of the "static snow" you see when tuning into a station that doesn't exist on a UHF antenna television. Also, icons in Chrome such as web sites "favorite icons" or favicon.ico (the icons that appear in the URL bar and bookmarks) will be scrambled in the same fashion , at first , until the actual icon is loaded.
Between this, my menu bar and finder icons not displaying, and being unable to boot into safe mode, I'm getting quite ******. I have no idea what the **** is going on with my Macbook Pro. The issue of the scrambled icons actually existed prior to installing an SSD and doing a fresh install of Mountain Lion. I may end up throwing in the towl and re-installing the operating system but I'm sure SOMETHING will happen. It seems the latest update, 10.8.2, is absolute garbage.
What the ****, Apple? And I really don't want to take the computer to the morons at the Apple Store. They are not "geniuses" by any measure.

I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount

I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?

In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
How to export contacts from Outlook for Windows.

How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.

How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.

When you shut down this window appears.
Uncheck the reopen box and it should stop this from happening

load-on-startup 1 /load-on-startup not working in Weblogic 9.1

Hi
          I have the following xml tag in web.xml file
          <load-on-startup>1</load-on-startup> for some servlets, i have given then sequence 1 to 5, but for some reason 5 is loading first and the whole application crashes because of this.
          do i have to mention anything in weblogic.xml?
          Any ideas how do i fix this

You're right, your situation is very similar to the situation the other poster describes. However, the main similarity is that neither of you have given us any information about what is going wrong. We can't read minds or read what's on your screen. We need to see specific error messages, stack traces, and specific code that shows what you are trying to do.
          However, it's likely that you're running into problems with the issues with "tag reuse" and "tag pooling". You should first read the JSP specification in the areas that talk about this issue, although this will probably leave you with more questions than you started with.
          I'm guessing that your "<gui:button>" element doesn't have any attributes. It's possible that WebLogic is reusing a single "<gui:button>" tag instance for each occurrence in your page. You may have to figure out how to turn off tag pooling in the JSP compiler, but I'm not sure how to do that.
          It's possible that Websphere doesn't give you an issue with this because perhaps they didn't bother with the tag pooling optimization (it is a good thing to have it available).

load-on-startup not working in weblogic 9.1

Hi
I have the following xml tag in web.xml file
<load-on-startup>1</load-on-startup> for some servlets, i have given then sequence 1 to 5, but for some reason 5 is loading first and the whole application crashes because of this.
do i have to mention anything in weblogic.xml?
Any ideas how do i fix this

Sounds like a bug. I'd suggest opening a case with [email protected]
FWIW, I get a little nervous about inter-application dependencies like
this, but the feature should work.
-- Rob
Subramanian V wrote:
Hi,
I have two applications -
ear1 is deployed in zipped format with a deployment order of 110
ear2 is deployed in exploded format with a deployment order of 150.
But when I start up weblogic, its almost always ear2 which is deployed first.
The behaviour seems random and it looks to me as if Weblogic is just picking at
random the application to deploy first.
Is there any solution for this?
rgds

How long load-on-startup servlet stays in weblogic6.1 sp2

does anybody know how long a load-on-startup servlet exists (before
          gets destroyed) in weblogic6.1 sp2. What i want is in load-on-startup
          servlet, I want to schedule a java.util.Timer and when application
          gets undeployed, i want to cancel that timer. if load-on-startup
          servlet exists for the whole application life span then i could do
          timer.cancel() on the destroy method of load-on-startup servlet.
          any suggestion?
          thanks in adv,
          soumik


You can simply use ServletContextListener instead - that way you do not
          have to worry if (or when) WebLogic decides to destroy the servlet.
          soumik <[email protected]> wrote:
          > does anybody know how long a load-on-startup servlet exists (before
          > gets destroyed) in weblogic6.1 sp2. What i want is in load-on-startup
          > servlet, I want to schedule a java.util.Timer and when application
          > gets undeployed, i want to cancel that timer. if load-on-startup
          > servlet exists for the whole application life span then i could do
          > timer.cancel() on the destroy method of load-on-startup servlet.
          > any suggestion?
          > thanks in adv,
          > soumik
          Dimitri

Can't get Servlet to Load On Startup

          I am trying to get a servlet to run at startup, and I have put the xml below in WEB-INF/web.xml to make this happen, but it is not working. The servlet does not run at startup.
          Anybody have any idea what the problem is?
          <servlet>
               <servlet-name>Cocoon</servlet-name>
               <servlet-class>org.apache.cocoon.Cocoon</servlet-class>
               <init-param>
                    <param-name>properties</param-name>
                    <param-value>./WEB-INF/cocoon.properties</param-value>
               </init-param>
               <load-on-startup/>
          </servlet>
          <servlet-mapping>
               <servlet-name>Cocoon</servlet-name>
               <url-pattern>*.xml</url-pattern>
          </servlet-mapping>
          ALSO, The servlet in this case is the Cocoon servlet, and the reason I am trying to get it to run at startup is because in my application I am calling it from another servlet, instead of through a direct call to an *.xml file, and so it requires a direct call to Initialize the Cocoon Engine. So, if anyone knows anything about how to solve this problem, that would also be helpful.
          Thanks.
          Harris.


          Thank you!
          That worked.
          Ruslan Bilorusets <[email protected]> wrote:
          >Harris,
          >
          >Please, try to specify a value for the <load-on-startup> element. It looks like a bug in our code.
          >
          >So,
          ><load-on-startup>1</load-on-startup>
          >should do the trick.
          >
          >Thanks,
          >-ruslan
          >
          >harris wrote:
          >
          >> I am trying to get a servlet to run at startup, and I have put the xml below in WEB-INF/web.xml to make this happen, but it is not working. The servlet does not run at startup.
          >>
          >> Anybody have any idea what the problem is?
          >>
          >> <servlet>
          >> <servlet-name>Cocoon</servlet-name>
          >> <servlet-class>org.apache.cocoon.Cocoon</servlet-class>
          >> <init-param>
          >> <param-name>properties</param-name>
          >> <param-value>./WEB-INF/cocoon.properties</param-value>
          >> </init-param>
          >> <load-on-startup/>
          >> </servlet>
          >> <servlet-mapping>
          >> <servlet-name>Cocoon</servlet-name>
          >> <url-pattern>*.xml</url-pattern>
          >> </servlet-mapping>
          >>
          >> ALSO, The servlet in this case is the Cocoon servlet, and the reason I am trying to get it to run at startup is because in my application I am calling it from another servlet, instead of through a direct call to an *.xml file, and so it requires a direct call to Initialize the Cocoon Engine. So, if anyone knows anything about how to solve this problem, that would also be helpful.
          >>
          >> Thanks.
          >> Harris.
          >

How can I get my homepage to load on startup?

My Yahoo homepage used to load on startup before I installed OS update.
How can I get it to load automatically again?

I have Snow Leapord and now when I startup Safari, my original homepage is gone, and there are only two choices: blank page or all the open pages from the previous session!! What happened to putting in the startup page option? When did the Preferences change?

What will happen if i mention like load-on-startup -1 /load-on-startup ?

Hi All,
In my web.xml what will happen if i mention like <load-on-startup>
-1</load-on-startup> ?

It's not WebLogic-specific, the load-on-startup web.xml element is a standard common component to all application servers.
As for what it does, then yes, the BEA link explains it well enough. So that explanation applies to WAS too.

What does this mean ---- load-on-startup 1 /load-on-startup

Hi All,
Anybody please tell me what does this mean:
<load-on-startup>1</load-on-startup>
Thanks in advance
amitindia

From the dtd :
The load-on-startup element indicates that this servlet should be
loaded (instantiated and have its init() called) on the startup
of the web application. The optional contents of
these element must be an integer indicating the order in which
the servlet should be loaded. If the value is a negative integer,
or the element is not present, the container is free to load the
servlet whenever it chooses. If the value is a positive integer
or 0, the container must load and initialize the servlet as the
application is deployed. The container must guarantee that
servlets marked with lower integers are loaded before servlets
marked with higher integers. The container may choose the order
of loading of servlets with the same load-on-start-up value.

Old vsn of Skype loads on startup

Similar Messages

Maybe you are looking for